From: Martin Schiller <ms.3headeddevs@gmail.com>
Date: Wed, 21 Aug 2019 07:06:54 +0000 (+0200)
Subject: lantiq: move dsl related base-files into own package
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4d8552c26527428e041a490a365b5cbd3495119e;p=openwrt%2Fstaging%2Fynezz.git

lantiq: move dsl related base-files into own package

It does not make sense to install this components on lantiq systems
where the dsl subsystem is not needed/used.

This also makes it possible to use the files also on other targets.
(hopefully ipq401x / FritzBox 7530 in the near future)

Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com>
---

diff --git a/package/network/config/ltq-adsl-app/Makefile b/package/network/config/ltq-adsl-app/Makefile
index 98c22a655f..4317f3d712 100644
--- a/package/network/config/ltq-adsl-app/Makefile
+++ b/package/network/config/ltq-adsl-app/Makefile
@@ -35,7 +35,7 @@ define Package/ltq-adsl-app
   CATEGORY:=Network
   TITLE:=Lantiq DSL userland tool
   URL:=http://www.lantiq.com/
-  DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy||TARGET_lantiq_ase) +libpthread
+  DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy||TARGET_lantiq_ase) +libpthread +ltq-dsl-base
   MENU:=1
 endef
 
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index 670f720e29..92d6faf736 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -28,7 +28,7 @@ define Package/ltq-vdsl-app
   CATEGORY:=Network
   TITLE:=Lantiq VDSL userland tool
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt
+  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base
 endef
 
 define Package/ltq-vdsl-app/description
diff --git a/package/network/utils/ltq-dsl-base/Makefile b/package/network/utils/ltq-dsl-base/Makefile
new file mode 100644
index 0000000000..6b931f7abd
--- /dev/null
+++ b/package/network/utils/ltq-dsl-base/Makefile
@@ -0,0 +1,32 @@
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ltq-dsl-base
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ltq-dsl-base
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=DSL related files for Intel/Lantiq DSL Chipsets
+  URL:=http://openwrt.org/
+  DEPENDS:=@TARGET_lantiq +jshn
+endef
+
+define Package/ltq-dsl-base/description
+  This package contains DSL related files for Intel/Lantiq DSL Chipsets.
+endef
+
+define Build/Compile
+endef
+
+define Package/ltq-dsl-base/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,ltq-dsl-base))
diff --git a/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/led_dsl.sh b/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/led_dsl.sh
new file mode 100755
index 0000000000..dd8e84a1af
--- /dev/null
+++ b/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/led_dsl.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+led_dsl_up() {
+	case "$(config_get led_dsl trigger)" in
+	"netdev")
+		led_set_attr $1 "trigger" "netdev"
+		led_set_attr $1 "device_name" "$(config_get led_dsl dev)"
+		for m in $(config_get led_dsl mode); do
+			led_set_attr $1 "$m" "1"
+		done
+		;;
+	*)
+		led_on $1
+		;;
+	esac
+}
+
+config_load system
+config_get led led_dsl sysfs
+if [ -n "$led" ]; then
+	case "$DSL_INTERFACE_STATUS" in
+	  "HANDSHAKE")  led_timer $led 500 500;;
+	  "TRAINING")   led_timer $led 200 200;;
+	  "UP")		led_dsl_up $led;;
+	  *)		led_off $led
+	esac
+fi
diff --git a/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/pppoa.sh b/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/pppoa.sh
new file mode 100755
index 0000000000..4506737672
--- /dev/null
+++ b/package/network/utils/ltq-dsl-base/files/etc/hotplug.d/dsl/pppoa.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+include /lib/network
+scan_interfaces
+
+interfaces=$(ubus list network.interface.\* | cut -d"." -f3)
+for ifc in $interfaces; do
+
+	json_load "$(ifstatus $ifc)"
+
+	json_get_var proto proto
+	if [ "$proto" != "pppoa" ]; then
+		continue
+	fi
+
+	json_get_var up up
+	config_get_bool auto "$ifc" auto 1
+	if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
+		if [ "$up" != 1 ] && [ "$auto" = 1 ]; then
+			( sleep 1; ifup "$ifc" ) &
+		fi
+	else
+		if [ "$up" = 1 ] && [ "$auto" = 1 ]; then
+			( sleep 1; ifdown "$ifc" ) &
+		else
+			json_get_var autostart autostart
+			if [ "$up" != 1 ] && [ "$autostart" = 1 ]; then
+				( sleep 1; ifdown "$ifc" ) &
+			fi
+		fi
+	fi
+done
diff --git a/package/network/utils/ltq-dsl-base/files/lib/functions/lantiq_dsl.sh b/package/network/utils/ltq-dsl-base/files/lib/functions/lantiq_dsl.sh
new file mode 100755
index 0000000000..11b02fc4aa
--- /dev/null
+++ b/package/network/utils/ltq-dsl-base/files/lib/functions/lantiq_dsl.sh
@@ -0,0 +1,749 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012-2014 OpenWrt.org
+
+if [ "$( which vdsl_cpe_control )" ]; then
+	XDSL_CTRL=vdsl_cpe_control
+else
+	XDSL_CTRL=dsl_cpe_control
+fi
+
+#
+# Basic functions to send CLI commands to the vdsl_cpe_control daemon
+#
+dsl_cmd() {
+	killall -q -0 ${XDSL_CTRL} && (
+		lock /var/lock/dsl_pipe
+		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
+		cat /tmp/pipe/dsl_cpe0_ack
+		lock -u /var/lock/dsl_pipe
+	)
+}
+dsl_val() {
+	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
+}
+dsl_string() {
+	echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
+}
+
+#
+# Simple divide by 10 routine to cope with one decimal place
+#
+dbt() {
+	local a=$(expr $1 / 10)
+	local b=$(expr $1 % 10)
+	echo "${a}.${b#-}"
+}
+#
+# Take a number and convert to k or meg
+#
+scale() {
+	local val=$1
+	local a
+	local b
+
+	if [ "$val" -gt 1000000 ]; then
+		a=$(expr $val / 1000)
+		b=$(expr $a % 1000)
+		a=$(expr $a / 1000)
+		printf "%d.%03d Mb" ${a} ${b}
+	elif [ "$val" -gt 1000 ]; then
+		a=$(expr $val / 1000)
+		printf "%d Kb" ${a}
+	else
+		echo "${val} b"
+	fi
+}
+
+scale_latency() {
+	local val=$1
+	local a
+	local b
+
+	a=$(expr $val / 100)
+	b=$(expr $val % 100)
+	printf "%d.%d ms" ${a} ${b}
+}
+
+scale_latency_us() {
+	local val=$1
+
+	expr $val \* 10
+}
+
+#
+# convert vendorid into human readable form
+#
+parse_vendorid() {
+	local val=$1
+	local name
+	local version
+
+	case "$val" in
+		B5,00,41,4C,43,42*)
+			name="Alcatel"
+			version=${val##*B5,00,41,4C,43,42,}
+			;;
+		B5,00,41,4E,44,56*)
+			name="Analog Devices"
+			version=${val##*B5,00,41,4E,44,56,}
+			;;
+		B5,00,42,44,43,4D*)
+			name="Broadcom"
+			version=${val##*B5,00,42,44,43,4D,}
+			;;
+		B5,00,43,45,4E,54*)
+			name="Centillium"
+			version=${val##*B5,00,43,45,4E,54,}
+			;;
+		B5,00,47,53,50,4E*)
+			name="Globespan"
+			version=${val##*B5,00,47,53,50,4E,}
+			;;
+		B5,00,49,4B,4E,53*)
+			name="Ikanos"
+			version=${val##*B5,00,49,4B,4E,53,}
+			;;
+		B5,00,49,46,54,4E*)
+			name="Infineon"
+			version=${val##*B5,00,49,46,54,4E,}
+			;;
+		B5,00,54,53,54,43*)
+			name="Texas Instruments"
+			version=${val##*B5,00,54,53,54,43,}
+			;;
+		B5,00,54,4D,4D,42*)
+			name="Thomson MultiMedia Broadband"
+			version=${val##*B5,00,54,4D,4D,42,}
+			;;
+		B5,00,54,43,54,4E*)
+			name="Trend Chip Technologies"
+			version=${val##*B5,00,54,43,54,4E,}
+			;;
+		B5,00,53,54,4D,49*)
+			name="ST Micro"
+			version=${val##*B5,00,53,54,4D,49,}
+			;;
+	esac
+
+	[ -n "$name" ] && {
+		val="$name"
+
+		[ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
+	}
+
+	echo "$val"
+}
+
+#
+# Read the data rates for both directions
+#
+data_rates() {
+	local csg
+	local dru
+	local drd
+	local sdru
+	local sdrd
+
+	csg=$(dsl_cmd g997csg 0 1)
+	drd=$(dsl_val "$csg" ActualDataRate)
+
+	csg=$(dsl_cmd g997csg 0 0)
+	dru=$(dsl_val "$csg" ActualDataRate)
+
+	[ -z "$drd" ] && drd=0
+	[ -z "$dru" ] && dru=0
+
+	sdrd=$(scale $drd)
+	sdru=$(scale $dru)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.data_rate_down=$drd"
+		echo "dsl.data_rate_up=$dru"
+		echo "dsl.data_rate_down_s=\"$sdrd\""
+		echo "dsl.data_rate_up_s=\"$sdru\""
+	else
+		echo "Data Rate:                                Down: ${sdrd}/s / Up: ${sdru}/s"
+	fi
+}
+
+#
+# Chipset
+#
+chipset() {
+	local vig
+	local cs
+
+	vig=$(dsl_cmd vig)
+	cs=$(dsl_val "$vig" DSL_ChipSetType)
+	csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
+	csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.chipset=\"${cs}\""
+		echo "dsl.firmware_version=\"${csfw}\""
+		echo "dsl.api_version=\"${csapi}\""
+	else
+		echo "Chipset:                                  ${cs}"
+		echo "Firmware Version:                         ${csfw}"
+		echo "API Version:                              ${csapi}"
+	fi
+}
+
+#
+# Vendor information
+#
+vendor() {
+	local lig
+	local vid
+	local svid
+
+	lig=$(dsl_cmd g997lig 1)
+	vid=$(dsl_string "$lig" G994VendorID)
+	svid=$(dsl_string "$lig" SystemVendorID)
+
+	vid=$(parse_vendorid $vid)
+	svid=$(parse_vendorid $svid)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.atuc_vendor_id=\"${vid}\""
+		echo "dsl.atuc_system_vendor_id=\"${svid}\""
+	else
+		echo "ATU-C Vendor ID:                          ${vid}"
+		echo "ATU-C System Vendor ID:                   ${svid}"
+	fi
+}
+
+#
+# XTSE capabilities
+#
+xtse() {
+	local xtusesg
+	local xtse1
+	local xtse2
+	local xtse3
+	local xtse4
+	local xtse5
+	local xtse6
+	local xtse7
+	local xtse8
+
+	local xtse_s=""
+
+	local annex_s=""
+	local line_mode_s=""
+	local vector_s=""
+
+	local dsmsg=""
+	local cmd=""
+
+	xtusesg=$(dsl_cmd g997xtusesg)
+	xtse1=$(dsl_val "$xtusesg" XTSE1)
+	xtse2=$(dsl_val "$xtusesg" XTSE2)
+	xtse3=$(dsl_val "$xtusesg" XTSE3)
+	xtse4=$(dsl_val "$xtusesg" XTSE4)
+	xtse5=$(dsl_val "$xtusesg" XTSE5)
+	xtse6=$(dsl_val "$xtusesg" XTSE6)
+	xtse7=$(dsl_val "$xtusesg" XTSE7)
+	xtse8=$(dsl_val "$xtusesg" XTSE8)
+
+	# Evaluate Annex (according to G.997.1, 7.3.1.1.1)
+	if [ $((xtse1 & 13)) != 0 \
+	-o $((xtse2 & 1)) != 0 \
+	-o $((xtse3 & 12)) != 0 \
+	-o $((xtse4 & 3)) != 0 \
+	-o $((xtse6 & 3)) != 0 \
+	-o $((xtse8 & 1)) != 0 ]; then
+		annex_s=" A,"
+	fi
+
+	if [ $((xtse1 & 48)) != 0 \
+	-o $((xtse2 & 2)) != 0 \
+	-o $((xtse3 & 48)) != 0 \
+	-o $((xtse6 & 12)) != 0 \
+	-o $((xtse8 & 2)) != 0 ]; then
+		annex_s="$annex_s B,"
+	fi
+
+	if [ $((xtse1 & 194)) != 0 \
+	-o $((xtse2 & 12)) != 0 \
+	-o $((xtse8 & 4)) != 0 ]; then
+		annex_s="$annex_s C,"
+	fi
+
+	if [ $((xtse4 & 48)) != 0 \
+	-o $((xtse5 & 3)) != 0 \
+	-o $((xtse6 & 192)) != 0 ]; then
+		annex_s="$annex_s I,"
+	fi
+
+	if [ $((xtse4 & 192)) != 0 \
+	-o $((xtse7 & 3)) != 0 ]; then
+		annex_s="$annex_s J,"
+	fi
+
+	if [ $((xtse5 & 60)) != 0 ]; then
+		annex_s="$annex_s L,"
+	fi
+
+	if [ $((xtse5 & 192)) != 0 \
+	-o $((xtse7 & 12)) != 0 ]; then
+		annex_s="$annex_s M,"
+	fi
+
+	annex_s=${annex_s:1}
+	annex_s=${annex_s%?}
+
+	# Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
+
+	# Regional standard: ANSI T1.413
+	if [ $((xtse1 & 1)) != 0  ]; then
+		line_mode_s=" T1.413,"
+	fi
+
+	# Regional standard: TS 101 388
+	if [ $((xtse1 & 1)) != 0  ]; then
+		line_mode_s="$line_mode_s TS 101 388,"
+	fi
+
+	if [ $((xtse1 & 252)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.1 (ADSL),"
+	fi
+
+	if [ $((xtse2 & 15)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
+	fi
+
+	if [ $((xtse3 & 60)) != 0 \
+	-o $((xtse4 & 240)) != 0 \
+	-o $((xtse5 & 252)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.3 (ADSL2),"
+	fi
+
+	if [ $((xtse4 & 3)) != 0 \
+	-o $((xtse5 & 3)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
+	fi
+
+	if [ $((xtse6 & 199)) != 0 \
+	-o $((xtse7 & 15)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
+	fi
+
+	if [ $((xtse8 & 7)) != 0  ]; then
+		dsmsg=$(dsl_cmd dsmsg)
+		vector_s=$(dsl_val "$dsmsg" eVectorStatus)
+
+		case "$vector_s" in
+			"0")	line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
+			"1")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
+			"2")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
+			*)	line_mode_s="$line_mode_s unknown," ;;
+		esac
+	fi
+
+	#!!! PROPRIETARY & INTERMEDIATE USE !!!
+	if [ $((xtse8 & 128)) != 0  ]; then
+		line_mode_s="$line_mode_s G.993.1 (VDSL),"
+	fi
+
+	line_mode_s=${line_mode_s:1}
+	line_mode_s=${line_mode_s%?}
+
+	xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.xtse1=${xtse1:-nil}"
+		echo "dsl.xtse2=${xtse2:-nil}"
+		echo "dsl.xtse3=${xtse3:-nil}"
+		echo "dsl.xtse4=${xtse4:-nil}"
+		echo "dsl.xtse5=${xtse5:-nil}"
+		echo "dsl.xtse6=${xtse6:-nil}"
+		echo "dsl.xtse7=${xtse7:-nil}"
+		echo "dsl.xtse8=${xtse8:-nil}"
+		echo "dsl.xtse_s=\"$xtse_s\""
+		echo "dsl.annex_s=\"${annex_s}\""
+		echo "dsl.line_mode_s=\"${line_mode_s}\""
+	else
+		echo "XTSE Capabilities:                        ${xtse_s}"
+		echo "Annex:                                    ${annex_s}"
+		echo "Line Mode:                                ${line_mode_s}"
+	fi
+}
+
+#
+# Power Management Mode
+#
+power_mode() {
+	local pmsg=$(dsl_cmd g997pmsg)
+	local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
+	local s;
+
+	case "$pm" in
+		"-1")		s="Power management state is not available" ;;
+		"0")		s="L0 - Synchronized" ;;
+		"1")		s="L1 - Power Down Data transmission (G.992.2)" ;;
+		"2")		s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
+		"3")		s="L3 - No power" ;;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.power_mode_num=${pm:-nil}"
+		echo "dsl.power_mode_s=\"$s\""
+	else
+		echo "Power Management Mode:                    $s"
+	fi
+}
+
+#
+# Latency type (interleave delay)
+#
+latency_delay() {
+	local csg
+
+	local idu
+	local idu_s;
+	local sidu
+
+	local idd
+	local idd_s;
+	local sidd
+
+	csg=$(dsl_cmd g997csg 0 1)
+	idd=$(dsl_val "$csg" ActualInterleaveDelay)
+
+	csg=$(dsl_cmd g997csg 0 0)
+	idu=$(dsl_val "$csg" ActualInterleaveDelay)
+
+	[ -z "$idd" ] && idd=0
+	[ -z "$idu" ] && idu=0
+
+	if [ "$idd" -gt 100 ]; then
+		idd_s="Interleave"
+	else
+		idd_s="Fast"
+	fi
+
+	if [ "$idu" -gt 100 ]; then
+		idu_s="Interleave"
+	else
+		idu_s="Fast"
+	fi
+
+	sidu=$(scale_latency $idu)
+	sidd=$(scale_latency $idd)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.latency_down=\"$(scale_latency_us $idd)\""
+		echo "dsl.latency_up=\"$(scale_latency_us $idu)\""
+		echo "dsl.latency_num_down=\"$sidd\""
+		echo "dsl.latency_num_up=\"$sidu\""
+		echo "dsl.latency_s_down=\"$idd_s\""
+		echo "dsl.latency_s_up=\"$idu_s\""
+	else
+		echo "Latency [Interleave Delay]:               ${sidd} [${idd_s}]   ${sidu} [${idu_s}]"
+	fi
+}
+
+#
+# Errors
+#
+errors() {
+	local lsctg
+	local dpctg
+	local fecsf
+	local fecsn
+	local esf
+	local esn
+	local sesf
+	local sesn
+	local lossf
+	local lossn
+	local uasf
+	local uasn
+
+	local crc_pf
+	local crc_pn
+	local crcp_pf
+	local crcp_pn
+	local hecf
+	local hecn
+
+	lsctg=$(dsl_cmd pmlsctg 1)
+	fecsf=$(dsl_val "$lsctg" nFECS)
+	esf=$(dsl_val "$lsctg" nES)
+	sesf=$(dsl_val "$lsctg" nSES)
+	lossf=$(dsl_val "$lsctg" nLOSS)
+	uasf=$(dsl_val "$lsctg" nUAS)
+
+	lsctg=$(dsl_cmd pmlsctg 0)
+	fecsn=$(dsl_val "$lsctg" nFECS)
+	esn=$(dsl_val "$lsctg" nES)
+	sesn=$(dsl_val "$lsctg" nSES)
+	lossn=$(dsl_val "$lsctg" nLOSS)
+	uasn=$(dsl_val "$lsctg" nUAS)
+
+	dpctg=$(dsl_cmd pmdpctg 0 1)
+	hecf=$(dsl_val "$dpctg" nHEC)
+	crc_pf=$(dsl_val "$dpctg" nCRC_P)
+	crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
+
+	dpctg=$(dsl_cmd pmdpctg 0 0)
+	hecn=$(dsl_val "$dpctg" nHEC)
+	crc_pn=$(dsl_val "$dpctg" nCRC_P)
+	crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.errors_fecs_near=${fecsn:-nil}"
+		echo "dsl.errors_fecs_far=${fecsf:-nil}"
+		echo "dsl.errors_es_near=${esn:-nil}"
+		echo "dsl.errors_es_far=${esf:-nil}"
+		echo "dsl.errors_ses_near=${sesn:-nil}"
+		echo "dsl.errors_ses_far=${sesf:-nil}"
+		echo "dsl.errors_loss_near=${lossn:-nil}"
+		echo "dsl.errors_loss_far=${lossf:-nil}"
+		echo "dsl.errors_uas_near=${uasn:-nil}"
+		echo "dsl.errors_uas_far=${uasf:-nil}"
+		echo "dsl.errors_hec_near=${hecn:-nil}"
+		echo "dsl.errors_hec_far=${hecf:-nil}"
+		echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
+		echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
+		echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
+		echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
+	else
+		echo "Forward Error Correction Seconds (FECS):  Near: ${fecsn} / Far: ${fecsf}"
+		echo "Errored seconds (ES):                     Near: ${esn} / Far: ${esf}"
+		echo "Severely Errored Seconds (SES):           Near: ${sesn} / Far: ${sesf}"
+		echo "Loss of Signal Seconds (LOSS):            Near: ${lossn} / Far: ${lossf}"
+		echo "Unavailable Seconds (UAS):                Near: ${uasn} / Far: ${uasf}"
+		echo "Header Error Code Errors (HEC):           Near: ${hecn} / Far: ${hecf}"
+		echo "Non Pre-emtive CRC errors (CRC_P):        Near: ${crc_pn} / Far: ${crc_pf}"
+		echo "Pre-emtive CRC errors (CRCP_P):           Near: ${crcp_pn} / Far: ${crcp_pf}"
+	fi
+}
+
+#
+# Work out how long the line has been up
+#
+line_uptime() {
+	local ccsg
+	local et
+	local etr
+	local d
+	local h
+	local m
+	local s
+	local rc=""
+
+	ccsg=$(dsl_cmd pmccsg 0 0 0)
+	et=$(dsl_val "$ccsg" nElapsedTime)
+
+	[ -z "$et" ] && et=0
+
+	d=$(expr $et / 86400)
+	etr=$(expr $et % 86400)
+	h=$(expr $etr / 3600)
+	etr=$(expr $etr % 3600)
+	m=$(expr $etr / 60)
+	s=$(expr $etr % 60)
+
+
+	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
+	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
+	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
+	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
+
+	[ -z "$rc" ] && rc="down"
+
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_uptime=${et}"
+		echo "dsl.line_uptime_s=\"${rc}\""
+	else
+
+		echo "Line Uptime Seconds:                      ${et}"
+		echo "Line Uptime:                              ${rc}"
+	fi
+}
+
+#
+# Get noise and attenuation figures
+#
+line_data() {
+	local lsg
+	local latnu
+	local latnd
+	local satnu
+	local satnd
+	local snru
+	local snrd
+	local attndru
+	local attndrd
+	local sattndru
+	local sattndrd
+	local actatpu
+	local actatpd
+
+	lsg=$(dsl_cmd g997lsg 1 1)
+	latnd=$(dsl_val "$lsg" LATN)
+	satnd=$(dsl_val "$lsg" SATN)
+	snrd=$(dsl_val "$lsg" SNR)
+	attndrd=$(dsl_val "$lsg" ATTNDR)
+	actatpd=$(dsl_val "$lsg" ACTATP)
+
+	lsg=$(dsl_cmd g997lsg 0 1)
+	latnu=$(dsl_val "$lsg" LATN)
+	satnu=$(dsl_val "$lsg" SATN)
+	snru=$(dsl_val "$lsg" SNR)
+	attndru=$(dsl_val "$lsg" ATTNDR)
+	actatpu=$(dsl_val "$lsg" ACTATP)
+
+	[ -z "$latnd" ] && latnd=0
+	[ -z "$latnu" ] && latnu=0
+	[ -z "$satnd" ] && satnd=0
+	[ -z "$satnu" ] && satnu=0
+	[ -z "$snrd" ] && snrd=0
+	[ -z "$snru" ] && snru=0
+	[ -z "$actatpd" ] && actatpd=0
+	[ -z "$actatpu" ] && actatpu=0
+
+	latnd=$(dbt $latnd)
+	latnu=$(dbt $latnu)
+	satnd=$(dbt $satnd)
+	satnu=$(dbt $satnu)
+	snrd=$(dbt $snrd)
+	snru=$(dbt $snru)
+	actatpd=$(dbt $actatpd)
+	actatpu=$(dbt $actatpu)
+
+	[ -z "$attndrd" ] && attndrd=0
+	[ -z "$attndru" ] && attndru=0
+
+	sattndrd=$(scale $attndrd)
+	sattndru=$(scale $attndru)
+	
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_attenuation_down=\"$latnd\""
+		echo "dsl.line_attenuation_up=\"$latnu\""
+		echo "dsl.noise_margin_down=\"$snrd\""
+		echo "dsl.noise_margin_up=\"$snru\""
+		echo "dsl.signal_attenuation_down=\"$satnd\""
+		echo "dsl.signal_attenuation_up=\"$satnu\""
+		echo "dsl.actatp_down=\"$actatpd\""
+		echo "dsl.actatp_up=\"$actatpu\""
+		echo "dsl.max_data_rate_down=$attndrd"
+		echo "dsl.max_data_rate_up=$attndru"
+		echo "dsl.max_data_rate_down_s=\"$sattndrd\""
+		echo "dsl.max_data_rate_up_s=\"$sattndru\""
+	else
+		echo "Line Attenuation (LATN):                  Down: ${latnd} dB / Up: ${latnu} dB"
+		echo "Signal Attenuation (SATN):                Down: ${satnd} dB / Up: ${satnu} dB"
+		echo "Noise Margin (SNR):                       Down: ${snrd} dB / Up: ${snru} dB"
+		echo "Aggregate Transmit Power (ACTATP):        Down: ${actatpd} dB / Up: ${actatpu} dB"
+		echo "Max. Attainable Data Rate (ATTNDR):       Down: ${sattndrd}/s / Up: ${sattndru}/s"
+	fi
+}
+
+#
+# Is the line up? Or what state is it in?
+#
+line_state() {
+	local lsg=$(dsl_cmd lsg)
+	local ls=$(dsl_val "$lsg" nLineState);
+	local s;
+
+	case "$ls" in
+		"0x0")		s="not initialized" ;;
+		"0x1")		s="exception" ;;
+		"0x10")		s="not updated" ;;
+		"0xff")		s="idle request" ;;
+		"0x100")	s="idle" ;;
+		"0x1ff")	s="silent request" ;;
+		"0x200")	s="silent" ;;
+		"0x300")	s="handshake" ;;
+		"0x380")	s="full_init" ;;
+		"0x400")	s="discovery" ;;
+		"0x500")	s="training" ;;
+		"0x600")	s="analysis" ;;
+		"0x700")	s="exchange" ;;
+		"0x800")	s="showtime_no_sync" ;;
+		"0x801")	s="showtime_tc_sync" ;;
+		"0x900")	s="fastretrain" ;;
+		"0xa00")	s="lowpower_l2" ;;
+		"0xb00")	s="loopdiagnostic active" ;;
+		"0xb10")	s="loopdiagnostic data exchange" ;;
+		"0xb20")	s="loopdiagnostic data request" ;;
+		"0xc00")	s="loopdiagnostic complete" ;;
+		"0x1000000")	s="test" ;;
+		"0xd00")	s="resync" ;;
+		"0x3c0")	s="short init entry" ;;
+		"")		s="not running daemon"; ls="0xfff" ;;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_state_num=$ls"
+		echo "dsl.line_state_detail=\"$s\""
+		if [ "$ls" = "0x801" ]; then
+			echo "dsl.line_state=\"UP\""
+		else
+			echo "dsl.line_state=\"DOWN\""
+		fi
+	else
+		if [ "$ls" = "0x801" ]; then
+			echo "Line State:                               UP [$ls: $s]"
+		else
+			echo "Line State:                               DOWN [$ls: $s]"
+		fi
+	fi
+}
+
+#
+# Which profile is used?
+#
+profile() {
+	local bpstg=$(dsl_cmd bpstg)
+	local profile=$(dsl_val "$bpstg" nProfile);
+	local s;
+
+	case "$profile" in
+		"0")	s="8a" ;;
+		"1")	s="8b" ;;
+		"2")	s="8c" ;;
+		"3")	s="8d" ;;
+		"4")	s="12a" ;;
+		"5")	s="12b" ;;
+		"6")	s="17a" ;;
+		"7")	s="30a" ;;
+		"8")	s="17b" ;;
+		"")		s="";;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.profile=${profile:-nil}"
+		echo "dsl.profile_s=\"${s}\""
+	else
+		echo "Profile:                                  $s"
+	fi
+}
+
+dslstat() {
+	vendor
+	chipset
+	xtse
+	profile
+	line_state
+	errors
+	power_mode
+	latency_delay
+	data_rates
+	line_data
+	line_uptime
+}
+
+lucistat() {
+	echo "local dsl={}"
+	dslstat
+	echo "return dsl"
+}
diff --git a/package/network/utils/ltq-dsl-base/files/sbin/dsl_notify.sh b/package/network/utils/ltq-dsl-base/files/sbin/dsl_notify.sh
new file mode 100755
index 0000000000..d615db5f05
--- /dev/null
+++ b/package/network/utils/ltq-dsl-base/files/sbin/dsl_notify.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# This script is called by dsl_cpe_control whenever there is a DSL event
+# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.
+
+exec /sbin/hotplug-call dsl
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/dsl/led_dsl.sh b/target/linux/lantiq/base-files/etc/hotplug.d/dsl/led_dsl.sh
deleted file mode 100755
index dd8e84a1af..0000000000
--- a/target/linux/lantiq/base-files/etc/hotplug.d/dsl/led_dsl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-led_dsl_up() {
-	case "$(config_get led_dsl trigger)" in
-	"netdev")
-		led_set_attr $1 "trigger" "netdev"
-		led_set_attr $1 "device_name" "$(config_get led_dsl dev)"
-		for m in $(config_get led_dsl mode); do
-			led_set_attr $1 "$m" "1"
-		done
-		;;
-	*)
-		led_on $1
-		;;
-	esac
-}
-
-config_load system
-config_get led led_dsl sysfs
-if [ -n "$led" ]; then
-	case "$DSL_INTERFACE_STATUS" in
-	  "HANDSHAKE")  led_timer $led 500 500;;
-	  "TRAINING")   led_timer $led 200 200;;
-	  "UP")		led_dsl_up $led;;
-	  *)		led_off $led
-	esac
-fi
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/dsl/pppoa.sh b/target/linux/lantiq/base-files/etc/hotplug.d/dsl/pppoa.sh
deleted file mode 100755
index 4506737672..0000000000
--- a/target/linux/lantiq/base-files/etc/hotplug.d/dsl/pppoa.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-include /lib/network
-scan_interfaces
-
-interfaces=$(ubus list network.interface.\* | cut -d"." -f3)
-for ifc in $interfaces; do
-
-	json_load "$(ifstatus $ifc)"
-
-	json_get_var proto proto
-	if [ "$proto" != "pppoa" ]; then
-		continue
-	fi
-
-	json_get_var up up
-	config_get_bool auto "$ifc" auto 1
-	if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
-		if [ "$up" != 1 ] && [ "$auto" = 1 ]; then
-			( sleep 1; ifup "$ifc" ) &
-		fi
-	else
-		if [ "$up" = 1 ] && [ "$auto" = 1 ]; then
-			( sleep 1; ifdown "$ifc" ) &
-		else
-			json_get_var autostart autostart
-			if [ "$up" != 1 ] && [ "$autostart" = 1 ]; then
-				( sleep 1; ifdown "$ifc" ) &
-			fi
-		fi
-	fi
-done
diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
deleted file mode 100755
index 11b02fc4aa..0000000000
--- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
+++ /dev/null
@@ -1,749 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2012-2014 OpenWrt.org
-
-if [ "$( which vdsl_cpe_control )" ]; then
-	XDSL_CTRL=vdsl_cpe_control
-else
-	XDSL_CTRL=dsl_cpe_control
-fi
-
-#
-# Basic functions to send CLI commands to the vdsl_cpe_control daemon
-#
-dsl_cmd() {
-	killall -q -0 ${XDSL_CTRL} && (
-		lock /var/lock/dsl_pipe
-		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
-		cat /tmp/pipe/dsl_cpe0_ack
-		lock -u /var/lock/dsl_pipe
-	)
-}
-dsl_val() {
-	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
-}
-dsl_string() {
-	echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
-}
-
-#
-# Simple divide by 10 routine to cope with one decimal place
-#
-dbt() {
-	local a=$(expr $1 / 10)
-	local b=$(expr $1 % 10)
-	echo "${a}.${b#-}"
-}
-#
-# Take a number and convert to k or meg
-#
-scale() {
-	local val=$1
-	local a
-	local b
-
-	if [ "$val" -gt 1000000 ]; then
-		a=$(expr $val / 1000)
-		b=$(expr $a % 1000)
-		a=$(expr $a / 1000)
-		printf "%d.%03d Mb" ${a} ${b}
-	elif [ "$val" -gt 1000 ]; then
-		a=$(expr $val / 1000)
-		printf "%d Kb" ${a}
-	else
-		echo "${val} b"
-	fi
-}
-
-scale_latency() {
-	local val=$1
-	local a
-	local b
-
-	a=$(expr $val / 100)
-	b=$(expr $val % 100)
-	printf "%d.%d ms" ${a} ${b}
-}
-
-scale_latency_us() {
-	local val=$1
-
-	expr $val \* 10
-}
-
-#
-# convert vendorid into human readable form
-#
-parse_vendorid() {
-	local val=$1
-	local name
-	local version
-
-	case "$val" in
-		B5,00,41,4C,43,42*)
-			name="Alcatel"
-			version=${val##*B5,00,41,4C,43,42,}
-			;;
-		B5,00,41,4E,44,56*)
-			name="Analog Devices"
-			version=${val##*B5,00,41,4E,44,56,}
-			;;
-		B5,00,42,44,43,4D*)
-			name="Broadcom"
-			version=${val##*B5,00,42,44,43,4D,}
-			;;
-		B5,00,43,45,4E,54*)
-			name="Centillium"
-			version=${val##*B5,00,43,45,4E,54,}
-			;;
-		B5,00,47,53,50,4E*)
-			name="Globespan"
-			version=${val##*B5,00,47,53,50,4E,}
-			;;
-		B5,00,49,4B,4E,53*)
-			name="Ikanos"
-			version=${val##*B5,00,49,4B,4E,53,}
-			;;
-		B5,00,49,46,54,4E*)
-			name="Infineon"
-			version=${val##*B5,00,49,46,54,4E,}
-			;;
-		B5,00,54,53,54,43*)
-			name="Texas Instruments"
-			version=${val##*B5,00,54,53,54,43,}
-			;;
-		B5,00,54,4D,4D,42*)
-			name="Thomson MultiMedia Broadband"
-			version=${val##*B5,00,54,4D,4D,42,}
-			;;
-		B5,00,54,43,54,4E*)
-			name="Trend Chip Technologies"
-			version=${val##*B5,00,54,43,54,4E,}
-			;;
-		B5,00,53,54,4D,49*)
-			name="ST Micro"
-			version=${val##*B5,00,53,54,4D,49,}
-			;;
-	esac
-
-	[ -n "$name" ] && {
-		val="$name"
-
-		[ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
-	}
-
-	echo "$val"
-}
-
-#
-# Read the data rates for both directions
-#
-data_rates() {
-	local csg
-	local dru
-	local drd
-	local sdru
-	local sdrd
-
-	csg=$(dsl_cmd g997csg 0 1)
-	drd=$(dsl_val "$csg" ActualDataRate)
-
-	csg=$(dsl_cmd g997csg 0 0)
-	dru=$(dsl_val "$csg" ActualDataRate)
-
-	[ -z "$drd" ] && drd=0
-	[ -z "$dru" ] && dru=0
-
-	sdrd=$(scale $drd)
-	sdru=$(scale $dru)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.data_rate_down=$drd"
-		echo "dsl.data_rate_up=$dru"
-		echo "dsl.data_rate_down_s=\"$sdrd\""
-		echo "dsl.data_rate_up_s=\"$sdru\""
-	else
-		echo "Data Rate:                                Down: ${sdrd}/s / Up: ${sdru}/s"
-	fi
-}
-
-#
-# Chipset
-#
-chipset() {
-	local vig
-	local cs
-
-	vig=$(dsl_cmd vig)
-	cs=$(dsl_val "$vig" DSL_ChipSetType)
-	csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
-	csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.chipset=\"${cs}\""
-		echo "dsl.firmware_version=\"${csfw}\""
-		echo "dsl.api_version=\"${csapi}\""
-	else
-		echo "Chipset:                                  ${cs}"
-		echo "Firmware Version:                         ${csfw}"
-		echo "API Version:                              ${csapi}"
-	fi
-}
-
-#
-# Vendor information
-#
-vendor() {
-	local lig
-	local vid
-	local svid
-
-	lig=$(dsl_cmd g997lig 1)
-	vid=$(dsl_string "$lig" G994VendorID)
-	svid=$(dsl_string "$lig" SystemVendorID)
-
-	vid=$(parse_vendorid $vid)
-	svid=$(parse_vendorid $svid)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.atuc_vendor_id=\"${vid}\""
-		echo "dsl.atuc_system_vendor_id=\"${svid}\""
-	else
-		echo "ATU-C Vendor ID:                          ${vid}"
-		echo "ATU-C System Vendor ID:                   ${svid}"
-	fi
-}
-
-#
-# XTSE capabilities
-#
-xtse() {
-	local xtusesg
-	local xtse1
-	local xtse2
-	local xtse3
-	local xtse4
-	local xtse5
-	local xtse6
-	local xtse7
-	local xtse8
-
-	local xtse_s=""
-
-	local annex_s=""
-	local line_mode_s=""
-	local vector_s=""
-
-	local dsmsg=""
-	local cmd=""
-
-	xtusesg=$(dsl_cmd g997xtusesg)
-	xtse1=$(dsl_val "$xtusesg" XTSE1)
-	xtse2=$(dsl_val "$xtusesg" XTSE2)
-	xtse3=$(dsl_val "$xtusesg" XTSE3)
-	xtse4=$(dsl_val "$xtusesg" XTSE4)
-	xtse5=$(dsl_val "$xtusesg" XTSE5)
-	xtse6=$(dsl_val "$xtusesg" XTSE6)
-	xtse7=$(dsl_val "$xtusesg" XTSE7)
-	xtse8=$(dsl_val "$xtusesg" XTSE8)
-
-	# Evaluate Annex (according to G.997.1, 7.3.1.1.1)
-	if [ $((xtse1 & 13)) != 0 \
-	-o $((xtse2 & 1)) != 0 \
-	-o $((xtse3 & 12)) != 0 \
-	-o $((xtse4 & 3)) != 0 \
-	-o $((xtse6 & 3)) != 0 \
-	-o $((xtse8 & 1)) != 0 ]; then
-		annex_s=" A,"
-	fi
-
-	if [ $((xtse1 & 48)) != 0 \
-	-o $((xtse2 & 2)) != 0 \
-	-o $((xtse3 & 48)) != 0 \
-	-o $((xtse6 & 12)) != 0 \
-	-o $((xtse8 & 2)) != 0 ]; then
-		annex_s="$annex_s B,"
-	fi
-
-	if [ $((xtse1 & 194)) != 0 \
-	-o $((xtse2 & 12)) != 0 \
-	-o $((xtse8 & 4)) != 0 ]; then
-		annex_s="$annex_s C,"
-	fi
-
-	if [ $((xtse4 & 48)) != 0 \
-	-o $((xtse5 & 3)) != 0 \
-	-o $((xtse6 & 192)) != 0 ]; then
-		annex_s="$annex_s I,"
-	fi
-
-	if [ $((xtse4 & 192)) != 0 \
-	-o $((xtse7 & 3)) != 0 ]; then
-		annex_s="$annex_s J,"
-	fi
-
-	if [ $((xtse5 & 60)) != 0 ]; then
-		annex_s="$annex_s L,"
-	fi
-
-	if [ $((xtse5 & 192)) != 0 \
-	-o $((xtse7 & 12)) != 0 ]; then
-		annex_s="$annex_s M,"
-	fi
-
-	annex_s=${annex_s:1}
-	annex_s=${annex_s%?}
-
-	# Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
-
-	# Regional standard: ANSI T1.413
-	if [ $((xtse1 & 1)) != 0  ]; then
-		line_mode_s=" T1.413,"
-	fi
-
-	# Regional standard: TS 101 388
-	if [ $((xtse1 & 1)) != 0  ]; then
-		line_mode_s="$line_mode_s TS 101 388,"
-	fi
-
-	if [ $((xtse1 & 252)) != 0  ]; then
-		line_mode_s="$line_mode_s G.992.1 (ADSL),"
-	fi
-
-	if [ $((xtse2 & 15)) != 0  ]; then
-		line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
-	fi
-
-	if [ $((xtse3 & 60)) != 0 \
-	-o $((xtse4 & 240)) != 0 \
-	-o $((xtse5 & 252)) != 0  ]; then
-		line_mode_s="$line_mode_s G.992.3 (ADSL2),"
-	fi
-
-	if [ $((xtse4 & 3)) != 0 \
-	-o $((xtse5 & 3)) != 0  ]; then
-		line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
-	fi
-
-	if [ $((xtse6 & 199)) != 0 \
-	-o $((xtse7 & 15)) != 0  ]; then
-		line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
-	fi
-
-	if [ $((xtse8 & 7)) != 0  ]; then
-		dsmsg=$(dsl_cmd dsmsg)
-		vector_s=$(dsl_val "$dsmsg" eVectorStatus)
-
-		case "$vector_s" in
-			"0")	line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
-			"1")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
-			"2")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
-			*)	line_mode_s="$line_mode_s unknown," ;;
-		esac
-	fi
-
-	#!!! PROPRIETARY & INTERMEDIATE USE !!!
-	if [ $((xtse8 & 128)) != 0  ]; then
-		line_mode_s="$line_mode_s G.993.1 (VDSL),"
-	fi
-
-	line_mode_s=${line_mode_s:1}
-	line_mode_s=${line_mode_s%?}
-
-	xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.xtse1=${xtse1:-nil}"
-		echo "dsl.xtse2=${xtse2:-nil}"
-		echo "dsl.xtse3=${xtse3:-nil}"
-		echo "dsl.xtse4=${xtse4:-nil}"
-		echo "dsl.xtse5=${xtse5:-nil}"
-		echo "dsl.xtse6=${xtse6:-nil}"
-		echo "dsl.xtse7=${xtse7:-nil}"
-		echo "dsl.xtse8=${xtse8:-nil}"
-		echo "dsl.xtse_s=\"$xtse_s\""
-		echo "dsl.annex_s=\"${annex_s}\""
-		echo "dsl.line_mode_s=\"${line_mode_s}\""
-	else
-		echo "XTSE Capabilities:                        ${xtse_s}"
-		echo "Annex:                                    ${annex_s}"
-		echo "Line Mode:                                ${line_mode_s}"
-	fi
-}
-
-#
-# Power Management Mode
-#
-power_mode() {
-	local pmsg=$(dsl_cmd g997pmsg)
-	local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
-	local s;
-
-	case "$pm" in
-		"-1")		s="Power management state is not available" ;;
-		"0")		s="L0 - Synchronized" ;;
-		"1")		s="L1 - Power Down Data transmission (G.992.2)" ;;
-		"2")		s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
-		"3")		s="L3 - No power" ;;
-		*)		s="unknown" ;;
-	esac
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.power_mode_num=${pm:-nil}"
-		echo "dsl.power_mode_s=\"$s\""
-	else
-		echo "Power Management Mode:                    $s"
-	fi
-}
-
-#
-# Latency type (interleave delay)
-#
-latency_delay() {
-	local csg
-
-	local idu
-	local idu_s;
-	local sidu
-
-	local idd
-	local idd_s;
-	local sidd
-
-	csg=$(dsl_cmd g997csg 0 1)
-	idd=$(dsl_val "$csg" ActualInterleaveDelay)
-
-	csg=$(dsl_cmd g997csg 0 0)
-	idu=$(dsl_val "$csg" ActualInterleaveDelay)
-
-	[ -z "$idd" ] && idd=0
-	[ -z "$idu" ] && idu=0
-
-	if [ "$idd" -gt 100 ]; then
-		idd_s="Interleave"
-	else
-		idd_s="Fast"
-	fi
-
-	if [ "$idu" -gt 100 ]; then
-		idu_s="Interleave"
-	else
-		idu_s="Fast"
-	fi
-
-	sidu=$(scale_latency $idu)
-	sidd=$(scale_latency $idd)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.latency_down=\"$(scale_latency_us $idd)\""
-		echo "dsl.latency_up=\"$(scale_latency_us $idu)\""
-		echo "dsl.latency_num_down=\"$sidd\""
-		echo "dsl.latency_num_up=\"$sidu\""
-		echo "dsl.latency_s_down=\"$idd_s\""
-		echo "dsl.latency_s_up=\"$idu_s\""
-	else
-		echo "Latency [Interleave Delay]:               ${sidd} [${idd_s}]   ${sidu} [${idu_s}]"
-	fi
-}
-
-#
-# Errors
-#
-errors() {
-	local lsctg
-	local dpctg
-	local fecsf
-	local fecsn
-	local esf
-	local esn
-	local sesf
-	local sesn
-	local lossf
-	local lossn
-	local uasf
-	local uasn
-
-	local crc_pf
-	local crc_pn
-	local crcp_pf
-	local crcp_pn
-	local hecf
-	local hecn
-
-	lsctg=$(dsl_cmd pmlsctg 1)
-	fecsf=$(dsl_val "$lsctg" nFECS)
-	esf=$(dsl_val "$lsctg" nES)
-	sesf=$(dsl_val "$lsctg" nSES)
-	lossf=$(dsl_val "$lsctg" nLOSS)
-	uasf=$(dsl_val "$lsctg" nUAS)
-
-	lsctg=$(dsl_cmd pmlsctg 0)
-	fecsn=$(dsl_val "$lsctg" nFECS)
-	esn=$(dsl_val "$lsctg" nES)
-	sesn=$(dsl_val "$lsctg" nSES)
-	lossn=$(dsl_val "$lsctg" nLOSS)
-	uasn=$(dsl_val "$lsctg" nUAS)
-
-	dpctg=$(dsl_cmd pmdpctg 0 1)
-	hecf=$(dsl_val "$dpctg" nHEC)
-	crc_pf=$(dsl_val "$dpctg" nCRC_P)
-	crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
-
-	dpctg=$(dsl_cmd pmdpctg 0 0)
-	hecn=$(dsl_val "$dpctg" nHEC)
-	crc_pn=$(dsl_val "$dpctg" nCRC_P)
-	crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.errors_fecs_near=${fecsn:-nil}"
-		echo "dsl.errors_fecs_far=${fecsf:-nil}"
-		echo "dsl.errors_es_near=${esn:-nil}"
-		echo "dsl.errors_es_far=${esf:-nil}"
-		echo "dsl.errors_ses_near=${sesn:-nil}"
-		echo "dsl.errors_ses_far=${sesf:-nil}"
-		echo "dsl.errors_loss_near=${lossn:-nil}"
-		echo "dsl.errors_loss_far=${lossf:-nil}"
-		echo "dsl.errors_uas_near=${uasn:-nil}"
-		echo "dsl.errors_uas_far=${uasf:-nil}"
-		echo "dsl.errors_hec_near=${hecn:-nil}"
-		echo "dsl.errors_hec_far=${hecf:-nil}"
-		echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
-		echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
-		echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
-		echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
-	else
-		echo "Forward Error Correction Seconds (FECS):  Near: ${fecsn} / Far: ${fecsf}"
-		echo "Errored seconds (ES):                     Near: ${esn} / Far: ${esf}"
-		echo "Severely Errored Seconds (SES):           Near: ${sesn} / Far: ${sesf}"
-		echo "Loss of Signal Seconds (LOSS):            Near: ${lossn} / Far: ${lossf}"
-		echo "Unavailable Seconds (UAS):                Near: ${uasn} / Far: ${uasf}"
-		echo "Header Error Code Errors (HEC):           Near: ${hecn} / Far: ${hecf}"
-		echo "Non Pre-emtive CRC errors (CRC_P):        Near: ${crc_pn} / Far: ${crc_pf}"
-		echo "Pre-emtive CRC errors (CRCP_P):           Near: ${crcp_pn} / Far: ${crcp_pf}"
-	fi
-}
-
-#
-# Work out how long the line has been up
-#
-line_uptime() {
-	local ccsg
-	local et
-	local etr
-	local d
-	local h
-	local m
-	local s
-	local rc=""
-
-	ccsg=$(dsl_cmd pmccsg 0 0 0)
-	et=$(dsl_val "$ccsg" nElapsedTime)
-
-	[ -z "$et" ] && et=0
-
-	d=$(expr $et / 86400)
-	etr=$(expr $et % 86400)
-	h=$(expr $etr / 3600)
-	etr=$(expr $etr % 3600)
-	m=$(expr $etr / 60)
-	s=$(expr $etr % 60)
-
-
-	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
-	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
-	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
-	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
-
-	[ -z "$rc" ] && rc="down"
-
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_uptime=${et}"
-		echo "dsl.line_uptime_s=\"${rc}\""
-	else
-
-		echo "Line Uptime Seconds:                      ${et}"
-		echo "Line Uptime:                              ${rc}"
-	fi
-}
-
-#
-# Get noise and attenuation figures
-#
-line_data() {
-	local lsg
-	local latnu
-	local latnd
-	local satnu
-	local satnd
-	local snru
-	local snrd
-	local attndru
-	local attndrd
-	local sattndru
-	local sattndrd
-	local actatpu
-	local actatpd
-
-	lsg=$(dsl_cmd g997lsg 1 1)
-	latnd=$(dsl_val "$lsg" LATN)
-	satnd=$(dsl_val "$lsg" SATN)
-	snrd=$(dsl_val "$lsg" SNR)
-	attndrd=$(dsl_val "$lsg" ATTNDR)
-	actatpd=$(dsl_val "$lsg" ACTATP)
-
-	lsg=$(dsl_cmd g997lsg 0 1)
-	latnu=$(dsl_val "$lsg" LATN)
-	satnu=$(dsl_val "$lsg" SATN)
-	snru=$(dsl_val "$lsg" SNR)
-	attndru=$(dsl_val "$lsg" ATTNDR)
-	actatpu=$(dsl_val "$lsg" ACTATP)
-
-	[ -z "$latnd" ] && latnd=0
-	[ -z "$latnu" ] && latnu=0
-	[ -z "$satnd" ] && satnd=0
-	[ -z "$satnu" ] && satnu=0
-	[ -z "$snrd" ] && snrd=0
-	[ -z "$snru" ] && snru=0
-	[ -z "$actatpd" ] && actatpd=0
-	[ -z "$actatpu" ] && actatpu=0
-
-	latnd=$(dbt $latnd)
-	latnu=$(dbt $latnu)
-	satnd=$(dbt $satnd)
-	satnu=$(dbt $satnu)
-	snrd=$(dbt $snrd)
-	snru=$(dbt $snru)
-	actatpd=$(dbt $actatpd)
-	actatpu=$(dbt $actatpu)
-
-	[ -z "$attndrd" ] && attndrd=0
-	[ -z "$attndru" ] && attndru=0
-
-	sattndrd=$(scale $attndrd)
-	sattndru=$(scale $attndru)
-	
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_attenuation_down=\"$latnd\""
-		echo "dsl.line_attenuation_up=\"$latnu\""
-		echo "dsl.noise_margin_down=\"$snrd\""
-		echo "dsl.noise_margin_up=\"$snru\""
-		echo "dsl.signal_attenuation_down=\"$satnd\""
-		echo "dsl.signal_attenuation_up=\"$satnu\""
-		echo "dsl.actatp_down=\"$actatpd\""
-		echo "dsl.actatp_up=\"$actatpu\""
-		echo "dsl.max_data_rate_down=$attndrd"
-		echo "dsl.max_data_rate_up=$attndru"
-		echo "dsl.max_data_rate_down_s=\"$sattndrd\""
-		echo "dsl.max_data_rate_up_s=\"$sattndru\""
-	else
-		echo "Line Attenuation (LATN):                  Down: ${latnd} dB / Up: ${latnu} dB"
-		echo "Signal Attenuation (SATN):                Down: ${satnd} dB / Up: ${satnu} dB"
-		echo "Noise Margin (SNR):                       Down: ${snrd} dB / Up: ${snru} dB"
-		echo "Aggregate Transmit Power (ACTATP):        Down: ${actatpd} dB / Up: ${actatpu} dB"
-		echo "Max. Attainable Data Rate (ATTNDR):       Down: ${sattndrd}/s / Up: ${sattndru}/s"
-	fi
-}
-
-#
-# Is the line up? Or what state is it in?
-#
-line_state() {
-	local lsg=$(dsl_cmd lsg)
-	local ls=$(dsl_val "$lsg" nLineState);
-	local s;
-
-	case "$ls" in
-		"0x0")		s="not initialized" ;;
-		"0x1")		s="exception" ;;
-		"0x10")		s="not updated" ;;
-		"0xff")		s="idle request" ;;
-		"0x100")	s="idle" ;;
-		"0x1ff")	s="silent request" ;;
-		"0x200")	s="silent" ;;
-		"0x300")	s="handshake" ;;
-		"0x380")	s="full_init" ;;
-		"0x400")	s="discovery" ;;
-		"0x500")	s="training" ;;
-		"0x600")	s="analysis" ;;
-		"0x700")	s="exchange" ;;
-		"0x800")	s="showtime_no_sync" ;;
-		"0x801")	s="showtime_tc_sync" ;;
-		"0x900")	s="fastretrain" ;;
-		"0xa00")	s="lowpower_l2" ;;
-		"0xb00")	s="loopdiagnostic active" ;;
-		"0xb10")	s="loopdiagnostic data exchange" ;;
-		"0xb20")	s="loopdiagnostic data request" ;;
-		"0xc00")	s="loopdiagnostic complete" ;;
-		"0x1000000")	s="test" ;;
-		"0xd00")	s="resync" ;;
-		"0x3c0")	s="short init entry" ;;
-		"")		s="not running daemon"; ls="0xfff" ;;
-		*)		s="unknown" ;;
-	esac
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_state_num=$ls"
-		echo "dsl.line_state_detail=\"$s\""
-		if [ "$ls" = "0x801" ]; then
-			echo "dsl.line_state=\"UP\""
-		else
-			echo "dsl.line_state=\"DOWN\""
-		fi
-	else
-		if [ "$ls" = "0x801" ]; then
-			echo "Line State:                               UP [$ls: $s]"
-		else
-			echo "Line State:                               DOWN [$ls: $s]"
-		fi
-	fi
-}
-
-#
-# Which profile is used?
-#
-profile() {
-	local bpstg=$(dsl_cmd bpstg)
-	local profile=$(dsl_val "$bpstg" nProfile);
-	local s;
-
-	case "$profile" in
-		"0")	s="8a" ;;
-		"1")	s="8b" ;;
-		"2")	s="8c" ;;
-		"3")	s="8d" ;;
-		"4")	s="12a" ;;
-		"5")	s="12b" ;;
-		"6")	s="17a" ;;
-		"7")	s="30a" ;;
-		"8")	s="17b" ;;
-		"")		s="";;
-		*)		s="unknown" ;;
-	esac
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.profile=${profile:-nil}"
-		echo "dsl.profile_s=\"${s}\""
-	else
-		echo "Profile:                                  $s"
-	fi
-}
-
-dslstat() {
-	vendor
-	chipset
-	xtse
-	profile
-	line_state
-	errors
-	power_mode
-	latency_delay
-	data_rates
-	line_data
-	line_uptime
-}
-
-lucistat() {
-	echo "local dsl={}"
-	dslstat
-	echo "return dsl"
-}
diff --git a/target/linux/lantiq/base-files/sbin/dsl_notify.sh b/target/linux/lantiq/base-files/sbin/dsl_notify.sh
deleted file mode 100755
index d615db5f05..0000000000
--- a/target/linux/lantiq/base-files/sbin/dsl_notify.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-#
-# This script is called by dsl_cpe_control whenever there is a DSL event
-# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.
-
-exec /sbin/hotplug-call dsl