From: Solomon Peachy Date: Sun, 2 Jun 2013 15:35:32 +0000 (-0400) Subject: cw1200: rename the cw1200 platform definition header X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4da2a54a842db6921289e3e25b0739531a594dea;p=openwrt%2Fstaging%2Fblogic.git cw1200: rename the cw1200 platform definition header My previous patch just moved the file, but it also needed to be renamed to conform to proper conventions. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c index 4b3148e47ee7..bb1f405315e4 100644 --- a/drivers/net/wireless/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/cw1200/cw1200_sdio.c @@ -20,7 +20,7 @@ #include "cw1200.h" #include "hwbus.h" -#include +#include #include "hwio.h" MODULE_AUTHOR("Dmitry Tarnyagin "); diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index d8dc7c6bb96d..e58f0a5bafa9 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -25,7 +25,7 @@ #include "cw1200.h" #include "hwbus.h" -#include +#include #include "hwio.h" MODULE_AUTHOR("Solomon Peachy "); diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h deleted file mode 100644 index c6fbc3ce4ab0..000000000000 --- a/include/linux/platform_data/cw1200_platform.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Dmitry Tarnyagin - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef CW1200_PLAT_H_INCLUDED -#define CW1200_PLAT_H_INCLUDED - -struct cw1200_platform_data_spi { - u8 spi_bits_per_word; /* REQUIRED */ - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - -struct cw1200_platform_data_sdio { - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int irq; /* IRQ line or 0 to use SDIO IRQ */ - int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - - -/* An example of SPI support in your board setup file: - - static struct cw1200_platform_data_spi cw1200_platform_data = { - .ref_clk = 38400, - .spi_bits_per_word = 16, - .reset = GPIO_RF_RESET, - .powerup = GPIO_RF_POWERUP, - .macaddr = wifi_mac_addr, - .sdd_file = "sdd_sagrad_1091_1098.bin", - }; - static struct spi_board_info myboard_spi_devices[] __initdata = { - { - .modalias = "cw1200_wlan_spi", - .max_speed_hz = 52000000, - .bus_num = 0, - .irq = WIFI_IRQ, - .platform_data = &cw1200_platform_data, - .chip_select = 0, - }, - }; - - */ - -/* An example of SDIO support in your board setup file: - - static struct cw1200_platform_data_sdio my_cw1200_platform_data = { - .ref_clk = 38400, - .have_5ghz = false, - .sdd_file = "sdd_myplatform.bin", - }; - cw1200_sdio_set_platform_data(&my_cw1200_platform_data); - - */ - -void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); - -#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 000000000000..c6fbc3ce4ab0 --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */