From: Hauke Mehrtens Date: Wed, 19 Dec 2018 11:53:52 +0000 (+0100) Subject: uboot-sunxi: Update to version 2018.11 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4ed05b805b02bf827afae41d34fb52de12bd0be7;p=openwrt%2Fstaging%2Flinusw.git uboot-sunxi: Update to version 2018.11 This updates the uboot for the sunxi target to version 2018.11 The removed patches are applied upstream and not needed any more. Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 1728cc2f1e..59aa4f0277 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -9,9 +9,9 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2018.05 +PKG_VERSION:=2018.11 -PKG_HASH:=4da13c2a6139a78cc08608f21fd4741db27eda336cfad7ab8264fda923b9c048 +PKG_HASH:=737c93f2ea03fec669e840dbee32bcf6238e6924ff5f20e4f1c472ee24e5d37e PKG_MAINTAINER:=Zoltan HERPAI diff --git a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch index 6501cca6d2..93ded58c71 100644 --- a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch +++ b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch @@ -1,6 +1,6 @@ --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile -@@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ +@@ -306,6 +306,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31-mixtile-loftq.dtb \ @@ -10,8 +10,8 @@ sun6i-a31s-inet-q972.dtb \ --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi -@@ -679,6 +679,13 @@ - allwinner,pull = ; +@@ -641,6 +641,13 @@ + function = "lcd0"; }; + i2c3_pins_a: i2c3@0 { @@ -22,7 +22,7 @@ + }; + mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; --- /dev/null +++ b/arch/arm/dts/sun6i-a31-pangolin.dts @@ -360,7 +360,7 @@ +CONFIG_SUNXI_SPI=y --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig -@@ -836,6 +836,14 @@ config VIDEO_LCD_PANEL_I2C_SCL +@@ -872,6 +872,14 @@ config VIDEO_LCD_PANEL_I2C_SCL Set the SCL pin for the LCD i2c interface. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. diff --git a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch index 6dbcb10719..1759ef1c37 100644 --- a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch +++ b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch @@ -2,9 +2,9 @@ --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig -@@ -22,6 +22,7 @@ CONFIG_DFU_RAM=y - CONFIG_ETH_DESIGNWARE=y +@@ -25,6 +25,7 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y + CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_GMAC_TX_DELAY=1 CONFIG_AXP_ALDO3_VOLT=2800 diff --git a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch index b3d9ba0409..8bab220518 100644 --- a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch +++ b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch @@ -6,7 +6,7 @@ Subject: sun6i: define alternate-function for UART2 on GPG --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h -@@ -185,6 +185,7 @@ enum sunxi_gpio_number { +@@ -186,6 +186,7 @@ enum sunxi_gpio_number { #define SUN6I_GPG_SDC1 2 #define SUN8I_GPG_SDC1 2 #define SUN6I_GPG_TWI3 2 diff --git a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch index e6ff8ce28c..b922690845 100644 --- a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch +++ b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch @@ -6,7 +6,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7) --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c -@@ -123,6 +123,10 @@ static int gpio_init(void) +@@ -127,6 +127,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1); sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1); sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); @@ -19,7 +19,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7) sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2); --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h -@@ -256,6 +256,8 @@ extern int soft_i2c_gpio_scl; +@@ -258,6 +258,8 @@ extern int soft_i2c_gpio_scl; #endif #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" diff --git a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch index 083933e062..a3a0156668 100644 --- a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch +++ b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch @@ -6,7 +6,7 @@ Subject: ARM: sunxi: Make CONS_INDEX configurable --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig -@@ -500,6 +500,14 @@ config SYS_BOARD +@@ -535,6 +535,14 @@ config SYS_BOARD config SYS_SOC default "sunxi" diff --git a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch index 2c63ad322e..12f47259c3 100644 --- a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch +++ b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch @@ -17,7 +17,7 @@ Cc: Simon Glass --- a/tools/fit_image.c +++ b/tools/fit_image.c -@@ -649,9 +649,14 @@ static int fit_handle_file(struct image_ +@@ -656,9 +656,14 @@ static int fit_handle_file(struct image_ } *cmd = '\0'; } else if (params->datafile) { diff --git a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch b/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch index 24b8634110..fe1821d9f8 100644 --- a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch +++ b/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch @@ -12,7 +12,7 @@ old way of generating images. --- a/Makefile +++ b/Makefile -@@ -1215,8 +1215,10 @@ endif +@@ -1255,8 +1255,10 @@ endif ifneq ($(CONFIG_ARCH_SUNXI),) ifeq ($(CONFIG_ARM64),) @@ -27,7 +27,7 @@ old way of generating images. $(call if_changed,cat) --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -711,7 +711,6 @@ config ARCH_SOCFPGA +@@ -820,7 +820,6 @@ config ARCH_SOCFPGA config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" diff --git a/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch b/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch index 947a1ab055..4056d98008 100644 --- a/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch +++ b/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch @@ -7,7 +7,7 @@ dtc from kernel 4.9. --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include -@@ -172,6 +172,11 @@ ld-version = $(shell $(LD) --version | $ +@@ -173,6 +173,11 @@ ld-version = $(shell $(LD) --version | $ # Usage: $(call ld-ifversion, -ge, 22252, y) ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4)) diff --git a/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch b/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch deleted file mode 100644 index 97aad78796..0000000000 --- a/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 96c04aab58e351fa9ed7e95783018d6dbf60768f Mon Sep 17 00:00:00 2001 -From: Jun Nie -Date: Mon, 7 May 2018 13:03:40 +0530 -Subject: sunxi: h3: Sync OTG and HCI nodes from Linux DT - -Allwinner H3 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI -or MUSB controller. - -Signed-off-by: Jun Nie -Reviewed-by: Jagan Teki -Acked-by: Jun Nie ---- - arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - ---- a/arch/arm/dts/sun8i-h3.dtsi -+++ b/arch/arm/dts/sun8i-h3.dtsi -@@ -219,6 +219,19 @@ - #size-cells = <0>; - }; - -+ usb_otg: usb@1c19000 { -+ compatible = "allwinner,sun8i-h3-musb"; -+ reg = <0x01c19000 0x400>; -+ clocks = <&ccu CLK_BUS_OTG>; -+ resets = <&ccu RST_BUS_OTG>; -+ interrupts = ; -+ interrupt-names = "mc"; -+ phys = <&usbphy 0>; -+ phy-names = "usb"; -+ extcon = <&usbphy 0>; -+ status = "disabled"; -+ }; -+ - usbphy: phy@01c19400 { - compatible = "allwinner,sun8i-h3-usb-phy"; - reg = <0x01c19400 0x2c>, -@@ -251,6 +264,25 @@ - #phy-cells = <1>; - }; - -+ ehci0: usb@1c1a000 { -+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; -+ reg = <0x01c1a000 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; -+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@1c1a400 { -+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; -+ reg = <0x01c1a400 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, -+ <&ccu CLK_USB_OHCI0>; -+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; -+ status = "disabled"; -+ }; -+ - ehci1: usb@01c1b000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1b000 0x100>; diff --git a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch deleted file mode 100644 index 97c4769468..0000000000 --- a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch +++ /dev/null @@ -1,179 +0,0 @@ -From fd3736abbe57a819312c8df96d14ec396b074581 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Tue, 26 Sep 2017 22:16:59 +0200 -Subject: sun8i: h2: Add initial Orange Pi R1 - -Orange Pi R1 is an open-source single-board computer using the -Allwinner H2+ SOC. - -H2+ Orange Pi R1 has - - Quad-core Cortex-A7 - - 256MB DDR3 - - micrSD slot - - 128MBit SPI Nor flash - - Debug TTL UART - - 100MBit/s Ethernet (H2+) - - 100MBit/s Ethernet (RTL8152B) - - Wifi (RTL8189ETV) - - USB 2.0 OTG + power supply -This board is very similar to the Orange Pi Zero. - -The device tree file is copied from the Linux kernel 4.18. - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 101 +++++++++++++++++++++++++++++ - board/sunxi/MAINTAINERS | 5 ++ - configs/orangepi_r1_defconfig | 16 +++++ - 4 files changed, 123 insertions(+) - create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts - create mode 100644 configs/orangepi_r1_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -350,6 +350,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ - sun8i-a83t-cubietruck-plus.dtb \ - sun8i-a83t-tbs-a711.dts - dtb-$(CONFIG_MACH_SUN8I_H3) += \ -+ sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-libretech-all-h3-cc.dtb \ ---- /dev/null -+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -0,0 +1,101 @@ -+/* -+ * Copyright (C) 2017 Icenowy Zheng -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/* Orange Pi R1 is based on Orange Pi Zero design */ -+#include "sun8i-h2-plus-orangepi-zero.dts" -+ -+/ { -+ model = "Xunlong Orange Pi R1"; -+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; -+ -+ /delete-node/ reg_vcc_wifi; -+ -+ /* -+ * Ths pin of this regulator is the same with the Wi-Fi extra -+ * regulator on the original Zero. However it's used for USB -+ * Ethernet rather than the Wi-Fi now. -+ */ -+ reg_vcc_usb_eth: reg-vcc-usb-ethernet { -+ compatible = "regulator-fixed"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-usb-ethernet"; -+ enable-active-high; -+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ aliases { -+ ethernet1 = &rtl8189etv; -+ }; -+}; -+ -+/* -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; -+ }; -+}; -+*/ -+ -+&ohci1 { -+ /* -+ * RTL8152B USB-Ethernet adapter is connected to USB1, -+ * and it's a USB 2.0 device. So the OHCI1 controller -+ * can be left disabled. -+ */ -+ status = "disabled"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ -+ rtl8189etv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&usbphy { -+ usb1_vbus-supply = <®_vcc_usb_eth>; -+}; ---- a/board/sunxi/MAINTAINERS -+++ b/board/sunxi/MAINTAINERS -@@ -342,6 +342,11 @@ M: Jagan Teki -+S: Maintained -+F: configs/orangepi_r1_defconfig -+ - PINE64 BOARDS - M: Andre Przywara - S: Maintained ---- /dev/null -+++ b/configs/orangepi_r1_defconfig -@@ -0,0 +1,16 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_SPL=y -+CONFIG_MACH_SUN8I_H3=y -+CONFIG_DRAM_CLK=624 -+CONFIG_DRAM_ZQ=3881979 -+CONFIG_DRAM_ODT_EN=y -+# CONFIG_VIDEO_DE2 is not set -+CONFIG_SPL_SPI_SUNXI=y -+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1" -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+CONFIG_CONSOLE_MUX=y -+# CONFIG_CMD_FLASH is not set -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch b/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch deleted file mode 100644 index e1e16d6f34..0000000000 --- a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch +++ /dev/null @@ -1,222 +0,0 @@ -From fd576a3c594ee2356b50a0738403e5cef094935a Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 9 Jun 2018 15:16:42 +0200 -Subject: sun50i: h5: Add initial Orange Pi Zero Plus support - -Orange Pi Zero Plus is an open-source single-board computer -using the Allwinner H5 SOC. - -H5 Orangepi Zero Plus has - - Quad-core Cortex-A53 - - 512MB DDR3 - - micrSD slot - - 16MBit SPI Nor flash - - Debug TTL UART - - 1GBit/s Ethernet (RTL8211E) - - Wifi (RTL8189FTV) - - USB 2.0 Host - - USB 2.0 OTG + power supply - -The device tree file is copied from the Linux kernel 4.18. - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 145 ++++++++++++++++++++++++++ - board/sunxi/MAINTAINERS | 5 + - configs/orangepi_zero_plus_defconfig | 16 +++ - 4 files changed, 167 insertions(+) - create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts - create mode 100644 configs/orangepi_zero_plus_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -372,6 +372,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ - dtb-$(CONFIG_MACH_SUN50I_H5) += \ - sun50i-h5-nanopi-neo2.dtb \ - sun50i-h5-nanopi-neo-plus2.dtb \ -+ sun50i-h5-orangepi-zero-plus.dtb \ - sun50i-h5-orangepi-pc2.dtb \ - sun50i-h5-orangepi-prime.dtb \ - sun50i-h5-orangepi-zero-plus2.dtb ---- /dev/null -+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts -@@ -0,0 +1,145 @@ -+/* -+ * Copyright (C) 2016 ARM Ltd. -+ * Copyright (C) 2018 Hauke Mehrtens -+ * -+ * SPDX-License-Identifier: (GPL-2.0+ OR X11) -+ */ -+ -+/dts-v1/; -+#include "sun50i-h5.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "Xunlong Orange Pi Zero Plus"; -+ compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5"; -+ -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ aliases { -+ ethernet0 = &emac; -+ ethernet1 = &rtl8189ftv; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ pwr { -+ label = "orangepi:green:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ -+ default-state = "on"; -+ }; -+ -+ status { -+ label = "orangepi:red:status"; -+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ -+ }; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ -+&mmc0 { -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ /* -+ * Explicitly define the sdio device, so that we can add an ethernet -+ * alias for it (which e.g. makes u-boot set a mac-address). -+ */ -+ rtl8189ftv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+/* -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "mxicy,mx25l1606e", "winbond,w25q128"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; -+ }; -+}; -+*/ -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ /* USB Type-A ports' VBUS is always on */ -+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+ status = "okay"; -+}; ---- a/board/sunxi/MAINTAINERS -+++ b/board/sunxi/MAINTAINERS -@@ -327,6 +327,11 @@ M: Icenowy Zheng - S: Maintained - F: configs/orangepi_zero_defconfig - -+ORANGEPI ZERO PLUS BOARD -+M: Hauke Mehrtens -+S: Maintained -+F: configs/orangepi_zero_plus_defconfig -+ - ORANGEPI ZERO PLUS 2 BOARD - M: Jagan Teki - S: Maintained ---- /dev/null -+++ b/configs/orangepi_zero_plus_defconfig -@@ -0,0 +1,16 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_SPL=y -+CONFIG_MACH_SUN50I_H5=y -+CONFIG_DRAM_CLK=624 -+CONFIG_DRAM_ZQ=3881977 -+CONFIG_MMC0_CD_PIN="PH13" -+CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus" -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+# CONFIG_CMD_FLASH is not set -+# CONFIG_SPL_DOS_PARTITION is not set -+# CONFIG_SPL_EFI_PARTITION is not set -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y