From: Boris Brezillon Date: Tue, 11 Apr 2017 16:39:25 +0000 (+0200) Subject: drm/vc4: Add runtime PM support to the HDMI encoder driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4f6e3d66ac522dec9733d433ad00e8e77747c372;p=openwrt%2Fstaging%2Fblogic.git drm/vc4: Add runtime PM support to the HDMI encoder driver The HDMI driver is currently enabling all clocks at probe time and keeps the power-domain connected to the HDMI encoder enabled. Move all activation code to vc4_hdmi_encoder_enable() and make sure the clks and power domain are released when the HDMI encoder is not used by adding deactivation steps in vc4_hdmi_encoder_disable(). Note that the sequencing imposed by the IP requires that we move vc4_hdmi_encoder_mode_set() code into vc4_hdmi_encoder_enable(). Signed-off-by: Boris Brezillon Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt --- diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index e9cbe269710b..3c2723f6345c 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -51,6 +51,7 @@ #include "linux/of_address.h" #include "linux/of_gpio.h" #include "linux/of_platform.h" +#include "linux/pm_runtime.h" #include "linux/rational.h" #include "sound/dmaengine_pcm.h" #include "sound/pcm_drm_eld.h" @@ -449,13 +450,38 @@ static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder) vc4_hdmi_set_spd_infoframe(encoder); } -static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *unadjusted_mode, - struct drm_display_mode *mode) +static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_hdmi *hdmi = vc4->hdmi; + int ret; + + HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG, 0); + + HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16); + HD_WRITE(VC4_HD_VID_CTL, + HD_READ(VC4_HD_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE); + + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); + udelay(1); + HD_WRITE(VC4_HD_M_CTL, 0); + + clk_disable_unprepare(hdmi->hsm_clock); + clk_disable_unprepare(hdmi->pixel_clock); + + ret = pm_runtime_put(&hdmi->pdev->dev); + if (ret < 0) + DRM_ERROR("Failed to release power domain: %d\n", ret); +} + +static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder) { + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); struct drm_device *dev = encoder->dev; struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_hdmi *hdmi = vc4->hdmi; bool debug_dump_regs = false; bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC; bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC; @@ -475,6 +501,64 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder, interlaced, VC4_HDMI_VERTB_VBP)); u32 csc_ctl; + int ret; + + ret = pm_runtime_get_sync(&hdmi->pdev->dev); + if (ret < 0) { + DRM_ERROR("Failed to retain power domain: %d\n", ret); + return; + } + + /* This is the rate that is set by the firmware. The number + * needs to be a bit higher than the pixel clock rate + * (generally 148.5Mhz). + */ + ret = clk_set_rate(hdmi->hsm_clock, 163682864); + if (ret) { + DRM_ERROR("Failed to set HSM clock rate: %d\n", ret); + return; + } + + ret = clk_set_rate(hdmi->pixel_clock, + mode->clock * 1000 * + ((mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1)); + if (ret) { + DRM_ERROR("Failed to set pixel clock rate: %d\n", ret); + return; + } + + ret = clk_prepare_enable(hdmi->pixel_clock); + if (ret) { + DRM_ERROR("Failed to turn on pixel clock: %d\n", ret); + return; + } + + ret = clk_prepare_enable(hdmi->hsm_clock); + if (ret) { + DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n", + ret); + clk_disable_unprepare(hdmi->pixel_clock); + return; + } + + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); + udelay(1); + HD_WRITE(VC4_HD_M_CTL, 0); + + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE); + + HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, + VC4_HDMI_SW_RESET_HDMI | + VC4_HDMI_SW_RESET_FORMAT_DETECT); + + HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0); + + /* PHY should be in reset, like + * vc4_hdmi_encoder_disable() does. + */ + HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16); + + HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0); if (debug_dump_regs) { DRM_INFO("HDMI regs before:\n"); @@ -483,9 +567,6 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder, HD_WRITE(VC4_HD_VID_CTL, 0); - clk_set_rate(vc4->hdmi->pixel_clock, mode->clock * 1000 * - ((mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1)); - HDMI_WRITE(VC4_HDMI_SCHEDULER_CONTROL, HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) | VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT | @@ -559,28 +640,6 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder, DRM_INFO("HDMI regs after:\n"); vc4_hdmi_dump_regs(dev); } -} - -static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct vc4_dev *vc4 = to_vc4_dev(dev); - - HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG, 0); - - HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16); - HD_WRITE(VC4_HD_VID_CTL, - HD_READ(VC4_HD_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE); -} - -static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder) -{ - struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); - struct drm_device *dev = encoder->dev; - struct vc4_dev *vc4 = to_vc4_dev(dev); - int ret; - - HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0); HD_WRITE(VC4_HD_VID_CTL, HD_READ(VC4_HD_VID_CTL) | @@ -646,7 +705,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder) } static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = { - .mode_set = vc4_hdmi_encoder_mode_set, .disable = vc4_hdmi_encoder_disable, .enable = vc4_hdmi_encoder_enable, }; @@ -1147,33 +1205,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) return -EPROBE_DEFER; } - /* Enable the clocks at startup. We can't quite recover from - * turning off the pixel clock during disable/enables yet, so - * it's always running. - */ - ret = clk_prepare_enable(hdmi->pixel_clock); - if (ret) { - DRM_ERROR("Failed to turn on pixel clock: %d\n", ret); - goto err_put_i2c; - } - - /* This is the rate that is set by the firmware. The number - * needs to be a bit higher than the pixel clock rate - * (generally 148.5Mhz). - */ - ret = clk_set_rate(hdmi->hsm_clock, 163682864); - if (ret) { - DRM_ERROR("Failed to set HSM clock rate: %d\n", ret); - goto err_unprepare_pix; - } - - ret = clk_prepare_enable(hdmi->hsm_clock); - if (ret) { - DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n", - ret); - goto err_unprepare_pix; - } - /* Only use the GPIO HPD pin if present in the DT, otherwise * we'll use the HDMI core's register. */ @@ -1185,7 +1216,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) &hpd_gpio_flags); if (hdmi->hpd_gpio < 0) { ret = hdmi->hpd_gpio; - goto err_unprepare_hsm; + goto err_put_i2c; } hdmi->hpd_active_low = hpd_gpio_flags & OF_GPIO_ACTIVE_LOW; @@ -1193,25 +1224,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4->hdmi = hdmi; - /* HDMI core must be enabled. */ - if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) { - HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); - udelay(1); - HD_WRITE(VC4_HD_M_CTL, 0); - - HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE); - - HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, - VC4_HDMI_SW_RESET_HDMI | - VC4_HDMI_SW_RESET_FORMAT_DETECT); - - HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0); - - /* PHY should be in reset, like - * vc4_hdmi_encoder_disable() does. - */ - HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16); - } + pm_runtime_enable(dev); drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs, DRM_MODE_ENCODER_TMDS, NULL); @@ -1231,10 +1244,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) err_destroy_encoder: vc4_hdmi_encoder_destroy(hdmi->encoder); -err_unprepare_hsm: - clk_disable_unprepare(hdmi->hsm_clock); -err_unprepare_pix: - clk_disable_unprepare(hdmi->pixel_clock); + pm_runtime_disable(dev); err_put_i2c: put_device(&hdmi->ddc->dev); @@ -1253,8 +1263,8 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master, vc4_hdmi_connector_destroy(hdmi->connector); vc4_hdmi_encoder_destroy(hdmi->encoder); - clk_disable_unprepare(hdmi->pixel_clock); - clk_disable_unprepare(hdmi->hsm_clock); + pm_runtime_disable(dev); + put_device(&hdmi->ddc->dev); vc4->hdmi = NULL;