From: David Bauer <mail@david-bauer.net>
Date: Tue, 12 Jun 2018 23:37:55 +0000 (+0200)
Subject: ipq40xx: add get_status_led to diag.sh
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4fc005197a320ff728544eba8028f7a9f23e1868;p=openwrt%2Fstaging%2Flynxis.git

ipq40xx: add get_status_led to diag.sh

This commit adds the get_status_led method to diag.sh, which sets the
boot-led as status-led for scripts using this method to get a
status-led.

This method is used platform-independent in downstream project gluon to
set the LED used to indicate the config-mode.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ipq40xx/base-files/etc/diag.sh b/target/linux/ipq40xx/base-files/etc/diag.sh
index 4cfe6325f2..a3a7047702 100755
--- a/target/linux/ipq40xx/base-files/etc/diag.sh
+++ b/target/linux/ipq40xx/base-files/etc/diag.sh
@@ -7,6 +7,10 @@ failsafe="$(get_dt_led failsafe)"
 running="$(get_dt_led running)"
 upgrade="$(get_dt_led upgrade)"
 
+get_status_led() {
+	status_led="$boot"
+}
+
 set_state() {
 	status_led="$boot"