From: Christian Lamparter Date: Sun, 28 May 2023 20:13:52 +0000 (+0200) Subject: apm821xx: copy over patches from 5.15 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=507013c2b9b9887954d7285c6338cc63572741a2;p=openwrt%2Fstaging%2Fdangole.git apm821xx: copy over patches from 5.15 dropped tc654 patch as it is upstream. refreshed the rest. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/patches-6.1/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-6.1/201-add-amcc-apollo3g-support.patch new file mode 100644 index 0000000000..d26e74dfb7 --- /dev/null +++ b/target/linux/apm821xx/patches-6.1/201-add-amcc-apollo3g-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/44x/Kconfig ++++ b/arch/powerpc/platforms/44x/Kconfig +@@ -118,6 +118,17 @@ config CANYONLANDS + help + This option enables support for the AMCC PPC460EX evaluation board. + ++config APOLLO3G ++ bool "Apollo3G" ++ depends on 44x ++ default n ++ select PPC44x_SIMPLE ++ select APM821xx ++ select IBM_EMAC_RGMII ++ select 460EX ++ help ++ This option enables support for the AMCC Apollo 3G board. ++ + config GLACIER + bool "Glacier" + depends on 44x +--- a/arch/powerpc/platforms/44x/ppc44x_simple.c ++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c +@@ -46,6 +46,7 @@ machine_device_initcall(ppc44x_simple, p + * board.c file for it rather than adding it to this list. + */ + static char *board[] __initdata = { ++ "amcc,apollo3g", + "amcc,arches", + "amcc,bamboo", + "apm,bluestone", diff --git a/target/linux/apm821xx/patches-6.1/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-6.1/300-fix-atheros-nics-on-apm82181.patch new file mode 100644 index 0000000000..706f86d0cf --- /dev/null +++ b/target/linux/apm821xx/patches-6.1/300-fix-atheros-nics-on-apm82181.patch @@ -0,0 +1,51 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1061,15 +1061,24 @@ static int __init apm821xx_pciex_init_po + u32 val; + + /* +- * Do a software reset on PCIe ports. +- * This code is to fix the issue that pci drivers doesn't re-assign +- * bus number for PCIE devices after Uboot +- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 +- * PT quad port, SAS LSI 1064E) ++ * Only reset the PHY when no link is currently established. ++ * This is for the Atheros PCIe board which has problems to establish ++ * the link (again) after this PHY reset. All other currently tested ++ * PCIe boards don't show this problem. + */ +- +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); +- mdelay(10); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ /* ++ * Do a software reset on PCIe ports. ++ * This code is to fix the issue that pci drivers doesn't re-assign ++ * bus number for PCIE devices after Uboot ++ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 ++ * PT quad port, SAS LSI 1064E) ++ */ ++ ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); ++ mdelay(10); ++ } + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; +@@ -1086,9 +1095,12 @@ static int __init apm821xx_pciex_init_po + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); +- mdelay(50); +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); ++ mdelay(50); ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | diff --git a/target/linux/apm821xx/patches-6.1/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-6.1/301-fix-memory-map-wndr4700.patch new file mode 100644 index 0000000000..0c9fb370f1 --- /dev/null +++ b/target/linux/apm821xx/patches-6.1/301-fix-memory-map-wndr4700.patch @@ -0,0 +1,14 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1903,9 +1903,9 @@ static void __init ppc4xx_configure_pcie + * if it works + */ + out_le32(mbase + PECFG_PIM0LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM0LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM1LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c); + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); + diff --git a/target/linux/apm821xx/patches-6.1/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-6.1/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch new file mode 100644 index 0000000000..2e2bda7c60 --- /dev/null +++ b/target/linux/apm821xx/patches-6.1/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch @@ -0,0 +1,29 @@ +From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 1 Dec 2019 02:08:23 +0100 +Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression + method + +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to +instruct the mkimage to use the xz compression, which isn't +supported. This patch forces the gzip compression, which is +supported and doesn't matter because the generated uImage for +the apm821xx target gets ignored as the OpenWrt toolchain will +do separate U-Boot kernel images for each device individually. + +Signed-off-by: Christian Lamparter +--- + arch/powerpc/boot/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -272,7 +272,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo + + # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd + quiet_cmd_wrap = WRAP $@ +- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ ++ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \ + $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ + vmlinux +