From: Pawel Kulakowski Date: Fri, 18 Dec 2015 09:48:57 +0000 (+0100) Subject: ath9k: Enable support for cloned SKBS X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=50e81e2f0b0a9fdb9e5bd515270680c7c281ce1f;p=openwrt%2Fstaging%2Fblogic.git ath9k: Enable support for cloned SKBS Ath9k driver does not modify tx skbs, so SUPPORTS_CLONED_SKBS flag can be set. Enabling this flag significant reduce number of copy operation during TCP Tx. This is especially noticeable on platforms with slower CPU (lower CPU usage brings profits in better TCP Tx troughput results). Tested on MIPS with 560 MHz clock Without CLONED_SKBS flag: TCP Tx 145 Mb/s (iperf result) __copy_user_common consumes 12.9% of CPU (result from perf tool) 0% CPU Idle With CLONED_SKBS flag: TCP Tx 170 Mb/s (iperf result) __copy_user_common consumes 1.8% of CPU (result from perf tool) 12% CPU Idle Signed-off-by: Pawel Kulakowski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 2e2b92ba96b8..ab7a1ac37849 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -828,6 +828,7 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) ieee80211_hw_set(hw, RX_INCLUDES_FCS); ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); ieee80211_hw_set(hw, SUPPORT_FAST_XMIT); + ieee80211_hw_set(hw, SUPPORTS_CLONED_SKBS); if (ath9k_ps_enable) ieee80211_hw_set(hw, SUPPORTS_PS);