From: Laxman Dewangan Date: Wed, 2 Mar 2016 10:54:48 +0000 (+0530) Subject: regulator: max77620: Add support to configure active-discharge X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=51817f468fb1a903d82ff2edd0e611d04910e675;p=openwrt%2Fstaging%2Fblogic.git regulator: max77620: Add support to configure active-discharge Add regulator ops callback for configuration of active-discharge and provide necessarily information via regulator descriptor. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 259e7e159c2f..73a3356a5c19 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -578,6 +578,7 @@ static struct regulator_ops max77620_regulator_ops = { .get_mode = max77620_regulator_get_mode, .set_ramp_delay = max77620_regulator_set_ramp_delay, .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_active_discharge = regulator_set_active_discharge_regmap, }; #define MAX77620_SD_CNF2_ROVS_EN_NONE 0 @@ -606,6 +607,10 @@ static struct regulator_ops max77620_regulator_ops = { .enable_time = 500, \ .vsel_mask = MAX77620_##_volt_mask##_VOLT_MASK, \ .vsel_reg = MAX77620_REG_##_id, \ + .active_discharge_off = 0, \ + .active_discharge_on = MAX77620_SD_CFG1_ADE_ENABLE, \ + .active_discharge_mask = MAX77620_SD_CFG1_ADE_MASK, \ + .active_discharge_reg = MAX77620_REG_##_id##_CFG, \ .type = REGULATOR_VOLTAGE, \ }, \ } @@ -633,6 +638,10 @@ static struct regulator_ops max77620_regulator_ops = { .enable_time = 500, \ .vsel_mask = MAX77620_LDO_VOLT_MASK, \ .vsel_reg = MAX77620_REG_##_id##_CFG, \ + .active_discharge_off = 0, \ + .active_discharge_on = MAX77620_LDO_CFG2_ADE_ENABLE, \ + .active_discharge_mask = MAX77620_LDO_CFG2_ADE_MASK, \ + .active_discharge_reg = MAX77620_REG_##_id##_CFG2, \ .type = REGULATOR_VOLTAGE, \ }, \ }