From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Fri, 11 May 2018 20:23:26 +0000 (+0300)
Subject: arm64: dts: renesas: r8a77980: disable EtherAVB
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=52d2e0cec73e61123860230d6d034cd07775dd78;p=openwrt%2Fstaging%2Fblogic.git

arm64: dts: renesas: r8a77980: disable EtherAVB

When adding the R8A77980 EtherAVB device I failed to notice that it does
not have the usual "status" property disabling the described devices in
anticipation that the board device trees enable the devices according to
their needs. This causes the EtherAVB driver to successfully probe despite
e.g. the needed pins not having been configured -- luckily, "eth<n>" device
can't be opened anyway...

Fixes: bf6f90832f81 ("arm64: dts: renesas: r8a77980: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---

diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 32db26f2c8b5..4c40f9f0ebc9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -244,6 +244,7 @@
 			phy-mode = "rgmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		scif0: serial@e6e60000 {