From: Måns Rullgård Date: Thu, 19 Nov 2015 13:02:59 +0000 (+0000) Subject: net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=52dfc8301248f5008d64a680e832e2f99c55ec9a;p=openwrt%2Fstaging%2Fblogic.git net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller This adds a driver for the Aurora VLSI NB8800 Ethernet controller. It is an almost complete rewrite of a driver originally found in a Sigma Designs 2.6.22 tree. Signed-off-by: Mans Rullgard Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 955d06b9cdba..31c5e476fd64 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -29,6 +29,7 @@ source "drivers/net/ethernet/apm/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/arc/Kconfig" source "drivers/net/ethernet/atheros/Kconfig" +source "drivers/net/ethernet/aurora/Kconfig" source "drivers/net/ethernet/cadence/Kconfig" source "drivers/net/ethernet/adi/Kconfig" source "drivers/net/ethernet/broadcom/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 4a2ee98738f0..071f84eb6f3f 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_NET_XGENE) += apm/ obj-$(CONFIG_NET_VENDOR_APPLE) += apple/ obj-$(CONFIG_NET_VENDOR_ARC) += arc/ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/ +obj-$(CONFIG_NET_VENDOR_AURORA) += aurora/ obj-$(CONFIG_NET_CADENCE) += cadence/ obj-$(CONFIG_NET_BFIN) += adi/ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ diff --git a/drivers/net/ethernet/aurora/Kconfig b/drivers/net/ethernet/aurora/Kconfig new file mode 100644 index 000000000000..a3c7106fdf85 --- /dev/null +++ b/drivers/net/ethernet/aurora/Kconfig @@ -0,0 +1,20 @@ +config NET_VENDOR_AURORA + bool "Aurora VLSI devices" + help + If you have a network (Ethernet) device belonging to this class, + say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + questions about Aurora devices. If you say Y, you will be asked + for your specific device in the following questions. + +if NET_VENDOR_AURORA + +config AURORA_NB8800 + tristate "Aurora AU-NB8800 support" + select PHYLIB + help + Support for the AU-NB8800 gigabit Ethernet controller. + +endif diff --git a/drivers/net/ethernet/aurora/Makefile b/drivers/net/ethernet/aurora/Makefile new file mode 100644 index 000000000000..6cb528a2fc26 --- /dev/null +++ b/drivers/net/ethernet/aurora/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_AURORA_NB8800) += nb8800.o diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c new file mode 100644 index 000000000000..ecc4a334c507 --- /dev/null +++ b/drivers/net/ethernet/aurora/nb8800.c @@ -0,0 +1,1552 @@ +/* + * Copyright (C) 2015 Mans Rullgard + * + * Mostly rewritten, based on driver from Sigma Designs. Original + * copyright notice below. + * + * + * Driver for tangox SMP864x/SMP865x/SMP867x/SMP868x builtin Ethernet Mac. + * + * Copyright (C) 2005 Maxime Bizon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "nb8800.h" + +static void nb8800_tx_done(struct net_device *dev); +static int nb8800_dma_stop(struct net_device *dev); + +static inline u8 nb8800_readb(struct nb8800_priv *priv, int reg) +{ + return readb_relaxed(priv->base + reg); +} + +static inline u32 nb8800_readl(struct nb8800_priv *priv, int reg) +{ + return readl_relaxed(priv->base + reg); +} + +static inline void nb8800_writeb(struct nb8800_priv *priv, int reg, u8 val) +{ + writeb_relaxed(val, priv->base + reg); +} + +static inline void nb8800_writew(struct nb8800_priv *priv, int reg, u16 val) +{ + writew_relaxed(val, priv->base + reg); +} + +static inline void nb8800_writel(struct nb8800_priv *priv, int reg, u32 val) +{ + writel_relaxed(val, priv->base + reg); +} + +static inline void nb8800_maskb(struct nb8800_priv *priv, int reg, + u32 mask, u32 val) +{ + u32 old = nb8800_readb(priv, reg); + u32 new = (old & ~mask) | (val & mask); + + if (new != old) + nb8800_writeb(priv, reg, new); +} + +static inline void nb8800_maskl(struct nb8800_priv *priv, int reg, + u32 mask, u32 val) +{ + u32 old = nb8800_readl(priv, reg); + u32 new = (old & ~mask) | (val & mask); + + if (new != old) + nb8800_writel(priv, reg, new); +} + +static inline void nb8800_modb(struct nb8800_priv *priv, int reg, u8 bits, + bool set) +{ + nb8800_maskb(priv, reg, bits, set ? bits : 0); +} + +static inline void nb8800_setb(struct nb8800_priv *priv, int reg, u8 bits) +{ + nb8800_maskb(priv, reg, bits, bits); +} + +static inline void nb8800_clearb(struct nb8800_priv *priv, int reg, u8 bits) +{ + nb8800_maskb(priv, reg, bits, 0); +} + +static inline void nb8800_modl(struct nb8800_priv *priv, int reg, u32 bits, + bool set) +{ + nb8800_maskl(priv, reg, bits, set ? bits : 0); +} + +static inline void nb8800_setl(struct nb8800_priv *priv, int reg, u32 bits) +{ + nb8800_maskl(priv, reg, bits, bits); +} + +static inline void nb8800_clearl(struct nb8800_priv *priv, int reg, u32 bits) +{ + nb8800_maskl(priv, reg, bits, 0); +} + +static int nb8800_mdio_wait(struct mii_bus *bus) +{ + struct nb8800_priv *priv = bus->priv; + u32 val; + + return readl_poll_timeout_atomic(priv->base + NB8800_MDIO_CMD, + val, !(val & MDIO_CMD_GO), 1, 1000); +} + +static int nb8800_mdio_cmd(struct mii_bus *bus, u32 cmd) +{ + struct nb8800_priv *priv = bus->priv; + int err; + + err = nb8800_mdio_wait(bus); + if (err) + return err; + + nb8800_writel(priv, NB8800_MDIO_CMD, cmd); + udelay(10); + nb8800_writel(priv, NB8800_MDIO_CMD, cmd | MDIO_CMD_GO); + + return nb8800_mdio_wait(bus); +} + +static int nb8800_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct nb8800_priv *priv = bus->priv; + u32 val; + int err; + + err = nb8800_mdio_cmd(bus, MDIO_CMD_ADDR(phy_id) | MDIO_CMD_REG(reg)); + if (err) + return err; + + val = nb8800_readl(priv, NB8800_MDIO_STS); + if (val & MDIO_STS_ERR) + return 0xffff; + + return val & 0xffff; +} + +static int nb8800_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) +{ + u32 cmd = MDIO_CMD_ADDR(phy_id) | MDIO_CMD_REG(reg) | + MDIO_CMD_DATA(val) | MDIO_CMD_WR; + + return nb8800_mdio_cmd(bus, cmd); +} + +static void nb8800_mac_tx(struct net_device *dev, bool enable) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + while (nb8800_readl(priv, NB8800_TXC_CR) & TCR_EN) + cpu_relax(); + + nb8800_modb(priv, NB8800_TX_CTL1, TX_EN, enable); +} + +static void nb8800_mac_rx(struct net_device *dev, bool enable) +{ + nb8800_modb(netdev_priv(dev), NB8800_RX_CTL, RX_EN, enable); +} + +static void nb8800_mac_af(struct net_device *dev, bool enable) +{ + nb8800_modb(netdev_priv(dev), NB8800_RX_CTL, RX_AF_EN, enable); +} + +static void nb8800_start_rx(struct net_device *dev) +{ + nb8800_setl(netdev_priv(dev), NB8800_RXC_CR, RCR_EN); +} + +static int nb8800_alloc_rx(struct net_device *dev, unsigned int i, bool napi) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_rx_desc *rxd = &priv->rx_descs[i]; + struct nb8800_rx_buf *rxb = &priv->rx_bufs[i]; + int size = L1_CACHE_ALIGN(RX_BUF_SIZE); + dma_addr_t dma_addr; + struct page *page; + unsigned long offset; + void *data; + + data = napi ? napi_alloc_frag(size) : netdev_alloc_frag(size); + if (!data) + return -ENOMEM; + + page = virt_to_head_page(data); + offset = data - page_address(page); + + dma_addr = dma_map_page(&dev->dev, page, offset, RX_BUF_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(&dev->dev, dma_addr)) { + skb_free_frag(data); + return -ENOMEM; + } + + rxb->page = page; + rxb->offset = offset; + rxd->desc.s_addr = dma_addr; + + return 0; +} + +static void nb8800_receive(struct net_device *dev, unsigned int i, + unsigned int len) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_rx_desc *rxd = &priv->rx_descs[i]; + struct page *page = priv->rx_bufs[i].page; + int offset = priv->rx_bufs[i].offset; + void *data = page_address(page) + offset; + dma_addr_t dma = rxd->desc.s_addr; + struct sk_buff *skb; + unsigned int size; + int err; + + size = len <= RX_COPYBREAK ? len : RX_COPYHDR; + + skb = napi_alloc_skb(&priv->napi, size); + if (!skb) { + netdev_err(dev, "rx skb allocation failed\n"); + dev->stats.rx_dropped++; + return; + } + + if (len <= RX_COPYBREAK) { + dma_sync_single_for_cpu(&dev->dev, dma, len, DMA_FROM_DEVICE); + memcpy(skb_put(skb, len), data, len); + dma_sync_single_for_device(&dev->dev, dma, len, + DMA_FROM_DEVICE); + } else { + err = nb8800_alloc_rx(dev, i, true); + if (err) { + netdev_err(dev, "rx buffer allocation failed\n"); + dev->stats.rx_dropped++; + return; + } + + dma_unmap_page(&dev->dev, dma, RX_BUF_SIZE, DMA_FROM_DEVICE); + memcpy(skb_put(skb, RX_COPYHDR), data, RX_COPYHDR); + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, + offset + RX_COPYHDR, len - RX_COPYHDR, + RX_BUF_SIZE); + } + + skb->protocol = eth_type_trans(skb, dev); + napi_gro_receive(&priv->napi, skb); +} + +static void nb8800_rx_error(struct net_device *dev, u32 report) +{ + if (report & RX_LENGTH_ERR) + dev->stats.rx_length_errors++; + + if (report & RX_FCS_ERR) + dev->stats.rx_crc_errors++; + + if (report & RX_FIFO_OVERRUN) + dev->stats.rx_fifo_errors++; + + if (report & RX_ALIGNMENT_ERROR) + dev->stats.rx_frame_errors++; + + dev->stats.rx_errors++; +} + +static int nb8800_poll(struct napi_struct *napi, int budget) +{ + struct net_device *dev = napi->dev; + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_rx_desc *rxd; + unsigned int last = priv->rx_eoc; + unsigned int next; + int work = 0; + + nb8800_tx_done(dev); + +again: + while (work < budget) { + struct nb8800_rx_buf *rxb; + unsigned int len; + + next = (last + 1) % RX_DESC_COUNT; + + rxb = &priv->rx_bufs[next]; + rxd = &priv->rx_descs[next]; + + if (!rxd->report) + break; + + len = RX_BYTES_TRANSFERRED(rxd->report); + + if (IS_RX_ERROR(rxd->report)) + nb8800_rx_error(dev, rxd->report); + else + nb8800_receive(dev, next, len); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + + if (rxd->report & RX_MULTICAST_PKT) + dev->stats.multicast++; + + rxd->report = 0; + last = next; + work++; + } + + if (work) { + priv->rx_descs[last].desc.config |= DESC_EOC; + wmb(); /* ensure new EOC is written before clearing old */ + priv->rx_descs[priv->rx_eoc].desc.config &= ~DESC_EOC; + priv->rx_eoc = last; + nb8800_start_rx(dev); + } + + if (work < budget) { + nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_irq); + + /* If a packet arrived after we last checked but + * before writing RX_ITR, the interrupt will be + * delayed, so we retrieve it now. + */ + if (priv->rx_descs[next].report) + goto again; + + napi_complete_done(napi, work); + } + + return work; +} + +static void __nb8800_tx_dma_start(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_tx_buf *txb; + u32 txc_cr; + + txb = &priv->tx_bufs[priv->tx_queue]; + if (!txb->ready) + return; + + txc_cr = nb8800_readl(priv, NB8800_TXC_CR); + if (txc_cr & TCR_EN) + return; + + nb8800_writel(priv, NB8800_TX_DESC_ADDR, txb->dma_desc); + wmb(); /* ensure desc addr is written before starting DMA */ + nb8800_writel(priv, NB8800_TXC_CR, txc_cr | TCR_EN); + + priv->tx_queue = (priv->tx_queue + txb->chain_len) % TX_DESC_COUNT; +} + +static void nb8800_tx_dma_start(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + spin_lock_irq(&priv->tx_lock); + __nb8800_tx_dma_start(dev); + spin_unlock_irq(&priv->tx_lock); +} + +static void nb8800_tx_dma_start_irq(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + spin_lock(&priv->tx_lock); + __nb8800_tx_dma_start(dev); + spin_unlock(&priv->tx_lock); +} + +static int nb8800_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_tx_desc *txd; + struct nb8800_tx_buf *txb; + struct nb8800_dma_desc *desc; + dma_addr_t dma_addr; + unsigned int dma_len; + unsigned int align; + unsigned int next; + + if (atomic_read(&priv->tx_free) <= NB8800_DESC_LOW) { + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } + + align = (8 - (uintptr_t)skb->data) & 7; + + dma_len = skb->len - align; + dma_addr = dma_map_single(&dev->dev, skb->data + align, + dma_len, DMA_TO_DEVICE); + + if (dma_mapping_error(&dev->dev, dma_addr)) { + netdev_err(dev, "tx dma mapping error\n"); + kfree_skb(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + if (atomic_dec_return(&priv->tx_free) <= NB8800_DESC_LOW) { + netif_stop_queue(dev); + skb->xmit_more = 0; + } + + next = priv->tx_next; + txb = &priv->tx_bufs[next]; + txd = &priv->tx_descs[next]; + desc = &txd->desc[0]; + + next = (next + 1) % TX_DESC_COUNT; + + if (align) { + memcpy(txd->buf, skb->data, align); + + desc->s_addr = + txb->dma_desc + offsetof(struct nb8800_tx_desc, buf); + desc->n_addr = txb->dma_desc + sizeof(txd->desc[0]); + desc->config = DESC_BTS(2) | DESC_DS | align; + + desc++; + } + + desc->s_addr = dma_addr; + desc->n_addr = priv->tx_bufs[next].dma_desc; + desc->config = DESC_BTS(2) | DESC_DS | DESC_EOF | dma_len; + + if (!skb->xmit_more) + desc->config |= DESC_EOC; + + txb->skb = skb; + txb->dma_addr = dma_addr; + txb->dma_len = dma_len; + + if (!priv->tx_chain) { + txb->chain_len = 1; + priv->tx_chain = txb; + } else { + priv->tx_chain->chain_len++; + } + + netdev_sent_queue(dev, skb->len); + + priv->tx_next = next; + + if (!skb->xmit_more) { + smp_wmb(); + priv->tx_chain->ready = true; + priv->tx_chain = NULL; + nb8800_tx_dma_start(dev); + } + + return NETDEV_TX_OK; +} + +static void nb8800_tx_error(struct net_device *dev, u32 report) +{ + if (report & TX_LATE_COLLISION) + dev->stats.collisions++; + + if (report & TX_PACKET_DROPPED) + dev->stats.tx_dropped++; + + if (report & TX_FIFO_UNDERRUN) + dev->stats.tx_fifo_errors++; + + dev->stats.tx_errors++; +} + +static void nb8800_tx_done(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + unsigned int limit = priv->tx_next; + unsigned int done = priv->tx_done; + unsigned int packets = 0; + unsigned int len = 0; + + while (done != limit) { + struct nb8800_tx_desc *txd = &priv->tx_descs[done]; + struct nb8800_tx_buf *txb = &priv->tx_bufs[done]; + struct sk_buff *skb; + + if (!txd->report) + break; + + skb = txb->skb; + len += skb->len; + + dma_unmap_single(&dev->dev, txb->dma_addr, txb->dma_len, + DMA_TO_DEVICE); + + if (IS_TX_ERROR(txd->report)) { + nb8800_tx_error(dev, txd->report); + kfree_skb(skb); + } else { + consume_skb(skb); + } + + dev->stats.tx_packets++; + dev->stats.tx_bytes += TX_BYTES_TRANSFERRED(txd->report); + dev->stats.collisions += TX_EARLY_COLLISIONS(txd->report); + + txb->skb = NULL; + txb->ready = false; + txd->report = 0; + + done = (done + 1) % TX_DESC_COUNT; + packets++; + } + + if (packets) { + smp_mb__before_atomic(); + atomic_add(packets, &priv->tx_free); + netdev_completed_queue(dev, packets, len); + netif_wake_queue(dev); + priv->tx_done = done; + } +} + +static irqreturn_t nb8800_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct nb8800_priv *priv = netdev_priv(dev); + irqreturn_t ret = IRQ_NONE; + u32 val; + + /* tx interrupt */ + val = nb8800_readl(priv, NB8800_TXC_SR); + if (val) { + nb8800_writel(priv, NB8800_TXC_SR, val); + + if (val & TSR_DI) + nb8800_tx_dma_start_irq(dev); + + if (val & TSR_TI) + napi_schedule_irqoff(&priv->napi); + + if (unlikely(val & TSR_DE)) + netdev_err(dev, "TX DMA error\n"); + + /* should never happen with automatic status retrieval */ + if (unlikely(val & TSR_TO)) + netdev_err(dev, "TX Status FIFO overflow\n"); + + ret = IRQ_HANDLED; + } + + /* rx interrupt */ + val = nb8800_readl(priv, NB8800_RXC_SR); + if (val) { + nb8800_writel(priv, NB8800_RXC_SR, val); + + if (likely(val & (RSR_RI | RSR_DI))) { + nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_poll); + napi_schedule_irqoff(&priv->napi); + } + + if (unlikely(val & RSR_DE)) + netdev_err(dev, "RX DMA error\n"); + + /* should never happen with automatic status retrieval */ + if (unlikely(val & RSR_RO)) + netdev_err(dev, "RX Status FIFO overflow\n"); + + ret = IRQ_HANDLED; + } + + return ret; +} + +static void nb8800_mac_config(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + bool gigabit = priv->speed == SPEED_1000; + u32 mac_mode_mask = RGMII_MODE | HALF_DUPLEX | GMAC_MODE; + u32 mac_mode = 0; + u32 slot_time; + u32 phy_clk; + u32 ict; + + if (!priv->duplex) + mac_mode |= HALF_DUPLEX; + + if (gigabit) { + if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII) + mac_mode |= RGMII_MODE; + + mac_mode |= GMAC_MODE; + phy_clk = 125000000; + + /* Should be 512 but register is only 8 bits */ + slot_time = 255; + } else { + phy_clk = 25000000; + slot_time = 128; + } + + ict = DIV_ROUND_UP(phy_clk, clk_get_rate(priv->clk)); + + nb8800_writeb(priv, NB8800_IC_THRESHOLD, ict); + nb8800_writeb(priv, NB8800_SLOT_TIME, slot_time); + nb8800_maskb(priv, NB8800_MAC_MODE, mac_mode_mask, mac_mode); +} + +static void nb8800_pause_config(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + u32 rxcr; + + if (priv->pause_aneg) { + if (!phydev || !phydev->link) + return; + + priv->pause_rx = phydev->pause; + priv->pause_tx = phydev->pause ^ phydev->asym_pause; + } + + nb8800_modb(priv, NB8800_RX_CTL, RX_PAUSE_EN, priv->pause_rx); + + rxcr = nb8800_readl(priv, NB8800_RXC_CR); + if (!!(rxcr & RCR_FL) == priv->pause_tx) + return; + + if (netif_running(dev)) { + napi_disable(&priv->napi); + netif_tx_lock_bh(dev); + nb8800_dma_stop(dev); + nb8800_modl(priv, NB8800_RXC_CR, RCR_FL, priv->pause_tx); + nb8800_start_rx(dev); + netif_tx_unlock_bh(dev); + napi_enable(&priv->napi); + } else { + nb8800_modl(priv, NB8800_RXC_CR, RCR_FL, priv->pause_tx); + } +} + +static void nb8800_link_reconfigure(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + int change = 0; + + if (phydev->link) { + if (phydev->speed != priv->speed) { + priv->speed = phydev->speed; + change = 1; + } + + if (phydev->duplex != priv->duplex) { + priv->duplex = phydev->duplex; + change = 1; + } + + if (change) + nb8800_mac_config(dev); + + nb8800_pause_config(dev); + } + + if (phydev->link != priv->link) { + priv->link = phydev->link; + change = 1; + } + + if (change) + phy_print_status(priv->phydev); +} + +static void nb8800_update_mac_addr(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + int i; + + for (i = 0; i < ETH_ALEN; i++) + nb8800_writeb(priv, NB8800_SRC_ADDR(i), dev->dev_addr[i]); + + for (i = 0; i < ETH_ALEN; i++) + nb8800_writeb(priv, NB8800_UC_ADDR(i), dev->dev_addr[i]); +} + +static int nb8800_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sock = addr; + + if (netif_running(dev)) + return -EBUSY; + + ether_addr_copy(dev->dev_addr, sock->sa_data); + nb8800_update_mac_addr(dev); + + return 0; +} + +static void nb8800_mc_init(struct net_device *dev, int val) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + nb8800_writeb(priv, NB8800_MC_INIT, val); + readb_poll_timeout_atomic(priv->base + NB8800_MC_INIT, val, !val, + 1, 1000); +} + +static void nb8800_set_rx_mode(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct netdev_hw_addr *ha; + int i; + + if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) { + nb8800_mac_af(dev, false); + return; + } + + nb8800_mac_af(dev, true); + nb8800_mc_init(dev, 0); + + netdev_for_each_mc_addr(ha, dev) { + for (i = 0; i < ETH_ALEN; i++) + nb8800_writeb(priv, NB8800_MC_ADDR(i), ha->addr[i]); + + nb8800_mc_init(dev, 0xff); + } +} + +#define RX_DESC_SIZE (RX_DESC_COUNT * sizeof(struct nb8800_rx_desc)) +#define TX_DESC_SIZE (TX_DESC_COUNT * sizeof(struct nb8800_tx_desc)) + +static void nb8800_dma_free(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + unsigned int i; + + if (priv->rx_bufs) { + for (i = 0; i < RX_DESC_COUNT; i++) + if (priv->rx_bufs[i].page) + put_page(priv->rx_bufs[i].page); + + kfree(priv->rx_bufs); + priv->rx_bufs = NULL; + } + + if (priv->tx_bufs) { + for (i = 0; i < TX_DESC_COUNT; i++) + kfree_skb(priv->tx_bufs[i].skb); + + kfree(priv->tx_bufs); + priv->tx_bufs = NULL; + } + + if (priv->rx_descs) { + dma_free_coherent(dev->dev.parent, RX_DESC_SIZE, priv->rx_descs, + priv->rx_desc_dma); + priv->rx_descs = NULL; + } + + if (priv->tx_descs) { + dma_free_coherent(dev->dev.parent, TX_DESC_SIZE, priv->tx_descs, + priv->tx_desc_dma); + priv->tx_descs = NULL; + } +} + +static void nb8800_dma_reset(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_rx_desc *rxd; + struct nb8800_tx_desc *txd; + unsigned int i; + + for (i = 0; i < RX_DESC_COUNT; i++) { + dma_addr_t rx_dma = priv->rx_desc_dma + i * sizeof(*rxd); + + rxd = &priv->rx_descs[i]; + rxd->desc.n_addr = rx_dma + sizeof(*rxd); + rxd->desc.r_addr = + rx_dma + offsetof(struct nb8800_rx_desc, report); + rxd->desc.config = priv->rx_dma_config; + rxd->report = 0; + } + + rxd->desc.n_addr = priv->rx_desc_dma; + rxd->desc.config |= DESC_EOC; + + priv->rx_eoc = RX_DESC_COUNT - 1; + + for (i = 0; i < TX_DESC_COUNT; i++) { + struct nb8800_tx_buf *txb = &priv->tx_bufs[i]; + dma_addr_t r_dma = txb->dma_desc + + offsetof(struct nb8800_tx_desc, report); + + txd = &priv->tx_descs[i]; + txd->desc[0].r_addr = r_dma; + txd->desc[1].r_addr = r_dma; + txd->report = 0; + } + + priv->tx_next = 0; + priv->tx_queue = 0; + priv->tx_done = 0; + atomic_set(&priv->tx_free, TX_DESC_COUNT); + + nb8800_writel(priv, NB8800_RX_DESC_ADDR, priv->rx_desc_dma); + + wmb(); /* ensure all setup is written before starting */ +} + +static int nb8800_dma_init(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + unsigned int n_rx = RX_DESC_COUNT; + unsigned int n_tx = TX_DESC_COUNT; + unsigned int i; + int err; + + priv->rx_descs = dma_alloc_coherent(dev->dev.parent, RX_DESC_SIZE, + &priv->rx_desc_dma, GFP_KERNEL); + if (!priv->rx_descs) + goto err_out; + + priv->rx_bufs = kcalloc(n_rx, sizeof(*priv->rx_bufs), GFP_KERNEL); + if (!priv->rx_bufs) + goto err_out; + + for (i = 0; i < n_rx; i++) { + err = nb8800_alloc_rx(dev, i, false); + if (err) + goto err_out; + } + + priv->tx_descs = dma_alloc_coherent(dev->dev.parent, TX_DESC_SIZE, + &priv->tx_desc_dma, GFP_KERNEL); + if (!priv->tx_descs) + goto err_out; + + priv->tx_bufs = kcalloc(n_tx, sizeof(*priv->tx_bufs), GFP_KERNEL); + if (!priv->tx_bufs) + goto err_out; + + for (i = 0; i < n_tx; i++) + priv->tx_bufs[i].dma_desc = + priv->tx_desc_dma + i * sizeof(struct nb8800_tx_desc); + + nb8800_dma_reset(dev); + + return 0; + +err_out: + nb8800_dma_free(dev); + + return -ENOMEM; +} + +static int nb8800_dma_stop(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + struct nb8800_tx_buf *txb = &priv->tx_bufs[0]; + struct nb8800_tx_desc *txd = &priv->tx_descs[0]; + int retry = 5; + u32 txcr; + u32 rxcr; + int err; + unsigned int i; + + /* wait for tx to finish */ + err = readl_poll_timeout_atomic(priv->base + NB8800_TXC_CR, txcr, + !(txcr & TCR_EN) && + priv->tx_done == priv->tx_next, + 1000, 1000000); + if (err) + return err; + + /* The rx DMA only stops if it reaches the end of chain. + * To make this happen, we set the EOC flag on all rx + * descriptors, put the device in loopback mode, and send + * a few dummy frames. The interrupt handler will ignore + * these since NAPI is disabled and no real frames are in + * the tx queue. + */ + + for (i = 0; i < RX_DESC_COUNT; i++) + priv->rx_descs[i].desc.config |= DESC_EOC; + + txd->desc[0].s_addr = + txb->dma_desc + offsetof(struct nb8800_tx_desc, buf); + txd->desc[0].config = DESC_BTS(2) | DESC_DS | DESC_EOF | DESC_EOC | 8; + memset(txd->buf, 0, sizeof(txd->buf)); + + nb8800_mac_af(dev, false); + nb8800_setb(priv, NB8800_MAC_MODE, LOOPBACK_EN); + + do { + nb8800_writel(priv, NB8800_TX_DESC_ADDR, txb->dma_desc); + wmb(); + nb8800_writel(priv, NB8800_TXC_CR, txcr | TCR_EN); + + err = readl_poll_timeout_atomic(priv->base + NB8800_RXC_CR, + rxcr, !(rxcr & RCR_EN), + 1000, 100000); + } while (err && --retry); + + nb8800_mac_af(dev, true); + nb8800_clearb(priv, NB8800_MAC_MODE, LOOPBACK_EN); + nb8800_dma_reset(dev); + + return retry ? 0 : -ETIMEDOUT; +} + +static void nb8800_pause_adv(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + u32 adv = 0; + + if (!priv->phydev) + return; + + if (priv->pause_rx) + adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; + if (priv->pause_tx) + adv ^= ADVERTISED_Asym_Pause; + + priv->phydev->supported |= adv; + priv->phydev->advertising |= adv; +} + +static int nb8800_open(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + int err; + + /* clear any pending interrupts */ + nb8800_writel(priv, NB8800_RXC_SR, 0xf); + nb8800_writel(priv, NB8800_TXC_SR, 0xf); + + err = nb8800_dma_init(dev); + if (err) + return err; + + err = request_irq(dev->irq, nb8800_irq, 0, dev_name(&dev->dev), dev); + if (err) + goto err_free_dma; + + nb8800_mac_rx(dev, true); + nb8800_mac_tx(dev, true); + + priv->phydev = of_phy_connect(dev, priv->phy_node, + nb8800_link_reconfigure, 0, + priv->phy_mode); + if (!priv->phydev) + goto err_free_irq; + + nb8800_pause_adv(dev); + + netdev_reset_queue(dev); + napi_enable(&priv->napi); + netif_start_queue(dev); + + nb8800_start_rx(dev); + phy_start(priv->phydev); + + return 0; + +err_free_irq: + free_irq(dev->irq, dev); +err_free_dma: + nb8800_dma_free(dev); + + return err; +} + +static int nb8800_stop(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + phy_stop(priv->phydev); + + netif_stop_queue(dev); + napi_disable(&priv->napi); + + nb8800_dma_stop(dev); + nb8800_mac_rx(dev, false); + nb8800_mac_tx(dev, false); + + phy_disconnect(priv->phydev); + priv->phydev = NULL; + + free_irq(dev->irq, dev); + + nb8800_dma_free(dev); + + return 0; +} + +static int nb8800_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + return phy_mii_ioctl(priv->phydev, rq, cmd); +} + +static const struct net_device_ops nb8800_netdev_ops = { + .ndo_open = nb8800_open, + .ndo_stop = nb8800_stop, + .ndo_start_xmit = nb8800_xmit, + .ndo_set_mac_address = nb8800_set_mac_address, + .ndo_set_rx_mode = nb8800_set_rx_mode, + .ndo_do_ioctl = nb8800_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static int nb8800_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + if (!priv->phydev) + return -ENODEV; + + return phy_ethtool_gset(priv->phydev, cmd); +} + +static int nb8800_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + if (!priv->phydev) + return -ENODEV; + + return phy_ethtool_sset(priv->phydev, cmd); +} + +static int nb8800_nway_reset(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + if (!priv->phydev) + return -ENODEV; + + return genphy_restart_aneg(priv->phydev); +} + +static void nb8800_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pp) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + pp->autoneg = priv->pause_aneg; + pp->rx_pause = priv->pause_rx; + pp->tx_pause = priv->pause_tx; +} + +static int nb8800_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pp) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + priv->pause_aneg = pp->autoneg; + priv->pause_rx = pp->rx_pause; + priv->pause_tx = pp->tx_pause; + + nb8800_pause_adv(dev); + + if (!priv->pause_aneg) + nb8800_pause_config(dev); + else if (priv->phydev) + phy_start_aneg(priv->phydev); + + return 0; +} + +static const char nb8800_stats_names[][ETH_GSTRING_LEN] = { + "rx_bytes_ok", + "rx_frames_ok", + "rx_undersize_frames", + "rx_fragment_frames", + "rx_64_byte_frames", + "rx_127_byte_frames", + "rx_255_byte_frames", + "rx_511_byte_frames", + "rx_1023_byte_frames", + "rx_max_size_frames", + "rx_oversize_frames", + "rx_bad_fcs_frames", + "rx_broadcast_frames", + "rx_multicast_frames", + "rx_control_frames", + "rx_pause_frames", + "rx_unsup_control_frames", + "rx_align_error_frames", + "rx_overrun_frames", + "rx_jabber_frames", + "rx_bytes", + "rx_frames", + + "tx_bytes_ok", + "tx_frames_ok", + "tx_64_byte_frames", + "tx_127_byte_frames", + "tx_255_byte_frames", + "tx_511_byte_frames", + "tx_1023_byte_frames", + "tx_max_size_frames", + "tx_oversize_frames", + "tx_broadcast_frames", + "tx_multicast_frames", + "tx_control_frames", + "tx_pause_frames", + "tx_underrun_frames", + "tx_single_collision_frames", + "tx_multi_collision_frames", + "tx_deferred_collision_frames", + "tx_late_collision_frames", + "tx_excessive_collision_frames", + "tx_bytes", + "tx_frames", + "tx_collisions", +}; + +#define NB8800_NUM_STATS ARRAY_SIZE(nb8800_stats_names) + +static int nb8800_get_sset_count(struct net_device *dev, int sset) +{ + if (sset == ETH_SS_STATS) + return NB8800_NUM_STATS; + + return -EOPNOTSUPP; +} + +static void nb8800_get_strings(struct net_device *dev, u32 sset, u8 *buf) +{ + if (sset == ETH_SS_STATS) + memcpy(buf, &nb8800_stats_names, sizeof(nb8800_stats_names)); +} + +static u32 nb8800_read_stat(struct net_device *dev, int index) +{ + struct nb8800_priv *priv = netdev_priv(dev); + + nb8800_writeb(priv, NB8800_STAT_INDEX, index); + + return nb8800_readl(priv, NB8800_STAT_DATA); +} + +static void nb8800_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *estats, u64 *st) +{ + unsigned int i; + u32 rx, tx; + + for (i = 0; i < NB8800_NUM_STATS / 2; i++) { + rx = nb8800_read_stat(dev, i); + tx = nb8800_read_stat(dev, i | 0x80); + st[i] = rx; + st[i + NB8800_NUM_STATS / 2] = tx; + } +} + +static const struct ethtool_ops nb8800_ethtool_ops = { + .get_settings = nb8800_get_settings, + .set_settings = nb8800_set_settings, + .nway_reset = nb8800_nway_reset, + .get_link = ethtool_op_get_link, + .get_pauseparam = nb8800_get_pauseparam, + .set_pauseparam = nb8800_set_pauseparam, + .get_sset_count = nb8800_get_sset_count, + .get_strings = nb8800_get_strings, + .get_ethtool_stats = nb8800_get_ethtool_stats, +}; + +static int nb8800_hw_init(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + u32 val; + + val = TX_RETRY_EN | TX_PAD_EN | TX_APPEND_FCS; + nb8800_writeb(priv, NB8800_TX_CTL1, val); + + /* Collision retry count */ + nb8800_writeb(priv, NB8800_TX_CTL2, 5); + + val = RX_PAD_STRIP | RX_AF_EN; + nb8800_writeb(priv, NB8800_RX_CTL, val); + + /* Chosen by fair dice roll */ + nb8800_writeb(priv, NB8800_RANDOM_SEED, 4); + + /* TX cycles per deferral period */ + nb8800_writeb(priv, NB8800_TX_SDP, 12); + + /* The following three threshold values have been + * experimentally determined for good results. + */ + + /* RX/TX FIFO threshold for partial empty (64-bit entries) */ + nb8800_writeb(priv, NB8800_PE_THRESHOLD, 0); + + /* RX/TX FIFO threshold for partial full (64-bit entries) */ + nb8800_writeb(priv, NB8800_PF_THRESHOLD, 255); + + /* Buffer size for transmit (64-bit entries) */ + nb8800_writeb(priv, NB8800_TX_BUFSIZE, 64); + + /* Configure tx DMA */ + + val = nb8800_readl(priv, NB8800_TXC_CR); + val &= TCR_LE; /* keep endian setting */ + val |= TCR_DM; /* DMA descriptor mode */ + val |= TCR_RS; /* automatically store tx status */ + val |= TCR_DIE; /* interrupt on DMA chain completion */ + val |= TCR_TFI(7); /* interrupt after 7 frames transmitted */ + val |= TCR_BTS(2); /* 32-byte bus transaction size */ + nb8800_writel(priv, NB8800_TXC_CR, val); + + /* TX complete interrupt after 10 ms or 7 frames (see above) */ + val = clk_get_rate(priv->clk) / 100; + nb8800_writel(priv, NB8800_TX_ITR, val); + + /* Configure rx DMA */ + + val = nb8800_readl(priv, NB8800_RXC_CR); + val &= RCR_LE; /* keep endian setting */ + val |= RCR_DM; /* DMA descriptor mode */ + val |= RCR_RS; /* automatically store rx status */ + val |= RCR_DIE; /* interrupt at end of DMA chain */ + val |= RCR_RFI(7); /* interrupt after 7 frames received */ + val |= RCR_BTS(2); /* 32-byte bus transaction size */ + nb8800_writel(priv, NB8800_RXC_CR, val); + + /* The rx interrupt can fire before the DMA has completed + * unless a small delay is added. 50 us is hopefully enough. + */ + priv->rx_itr_irq = clk_get_rate(priv->clk) / 20000; + + /* In NAPI poll mode we want to disable interrupts, but the + * hardware does not permit this. Delay 10 ms instead. + */ + priv->rx_itr_poll = clk_get_rate(priv->clk) / 100; + + nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_irq); + + priv->rx_dma_config = RX_BUF_SIZE | DESC_BTS(2) | DESC_DS | DESC_EOF; + + /* Flow control settings */ + + /* Pause time of 0.1 ms */ + val = 100000 / 512; + nb8800_writeb(priv, NB8800_PQ1, val >> 8); + nb8800_writeb(priv, NB8800_PQ2, val & 0xff); + + /* Auto-negotiate by default */ + priv->pause_aneg = true; + priv->pause_rx = true; + priv->pause_tx = true; + + nb8800_mc_init(dev, 0); + + return 0; +} + +static int nb8800_tangox_init(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + u32 pad_mode = PAD_MODE_MII; + + switch (priv->phy_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + pad_mode = PAD_MODE_MII; + break; + + case PHY_INTERFACE_MODE_RGMII: + pad_mode = PAD_MODE_RGMII; + break; + + case PHY_INTERFACE_MODE_RGMII_TXID: + pad_mode = PAD_MODE_RGMII | PAD_MODE_GTX_CLK_DELAY; + break; + + default: + dev_err(dev->dev.parent, "unsupported phy mode %s\n", + phy_modes(priv->phy_mode)); + return -EINVAL; + } + + nb8800_writeb(priv, NB8800_TANGOX_PAD_MODE, pad_mode); + + return 0; +} + +static int nb8800_tangox_reset(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + int clk_div; + + nb8800_writeb(priv, NB8800_TANGOX_RESET, 0); + usleep_range(1000, 10000); + nb8800_writeb(priv, NB8800_TANGOX_RESET, 1); + + wmb(); /* ensure reset is cleared before proceeding */ + + clk_div = DIV_ROUND_UP(clk_get_rate(priv->clk), 2 * MAX_MDC_CLOCK); + nb8800_writew(priv, NB8800_TANGOX_MDIO_CLKDIV, clk_div); + + return 0; +} + +static const struct nb8800_ops nb8800_tangox_ops = { + .init = nb8800_tangox_init, + .reset = nb8800_tangox_reset, +}; + +static int nb8800_tango4_init(struct net_device *dev) +{ + struct nb8800_priv *priv = netdev_priv(dev); + int err; + + err = nb8800_tangox_init(dev); + if (err) + return err; + + /* On tango4 interrupt on DMA completion per frame works and gives + * better performance despite generating more rx interrupts. + */ + + /* Disable unnecessary interrupt on rx completion */ + nb8800_clearl(priv, NB8800_RXC_CR, RCR_RFI(7)); + + /* Request interrupt on descriptor DMA completion */ + priv->rx_dma_config |= DESC_ID; + + return 0; +} + +static const struct nb8800_ops nb8800_tango4_ops = { + .init = nb8800_tango4_init, + .reset = nb8800_tangox_reset, +}; + +static const struct of_device_id nb8800_dt_ids[] = { + { + .compatible = "aurora,nb8800", + }, + { + .compatible = "sigma,smp8642-ethernet", + .data = &nb8800_tangox_ops, + }, + { + .compatible = "sigma,smp8734-ethernet", + .data = &nb8800_tango4_ops, + }, + { } +}; + +static int nb8800_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct nb8800_ops *ops = NULL; + struct nb8800_priv *priv; + struct resource *res; + struct net_device *dev; + struct mii_bus *bus; + const unsigned char *mac; + void __iomem *base; + int irq; + int ret; + + match = of_match_device(nb8800_dt_ids, &pdev->dev); + if (match) + ops = match->data; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "No IRQ\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + dev_dbg(&pdev->dev, "AU-NB8800 Ethernet at %pa\n", &res->start); + + dev = alloc_etherdev(sizeof(*priv)); + if (!dev) + return -ENOMEM; + + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + priv = netdev_priv(dev); + priv->base = base; + + priv->phy_mode = of_get_phy_mode(pdev->dev.of_node); + if (priv->phy_mode < 0) + priv->phy_mode = PHY_INTERFACE_MODE_RGMII; + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + ret = PTR_ERR(priv->clk); + goto err_free_dev; + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + goto err_free_dev; + + spin_lock_init(&priv->tx_lock); + + if (ops && ops->reset) { + ret = ops->reset(dev); + if (ret) + goto err_free_dev; + } + + bus = devm_mdiobus_alloc(&pdev->dev); + if (!bus) { + ret = -ENOMEM; + goto err_disable_clk; + } + + bus->name = "nb8800-mii"; + bus->read = nb8800_mdio_read; + bus->write = nb8800_mdio_write; + bus->parent = &pdev->dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%lx.nb8800-mii", + (unsigned long)res->start); + bus->priv = priv; + + ret = of_mdiobus_register(bus, pdev->dev.of_node); + if (ret) { + dev_err(&pdev->dev, "failed to register MII bus\n"); + goto err_disable_clk; + } + + priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); + if (!priv->phy_node) { + dev_err(&pdev->dev, "no PHY specified\n"); + ret = -ENODEV; + goto err_free_bus; + } + + priv->mii_bus = bus; + + ret = nb8800_hw_init(dev); + if (ret) + goto err_free_bus; + + if (ops && ops->init) { + ret = ops->init(dev); + if (ret) + goto err_free_bus; + } + + dev->netdev_ops = &nb8800_netdev_ops; + dev->ethtool_ops = &nb8800_ethtool_ops; + dev->flags |= IFF_MULTICAST; + dev->irq = irq; + + mac = of_get_mac_address(pdev->dev.of_node); + if (mac) + ether_addr_copy(dev->dev_addr, mac); + + if (!is_valid_ether_addr(dev->dev_addr)) + eth_hw_addr_random(dev); + + nb8800_update_mac_addr(dev); + + netif_carrier_off(dev); + + ret = register_netdev(dev); + if (ret) { + netdev_err(dev, "failed to register netdev\n"); + goto err_free_dma; + } + + netif_napi_add(dev, &priv->napi, nb8800_poll, NAPI_POLL_WEIGHT); + + netdev_info(dev, "MAC address %pM\n", dev->dev_addr); + + return 0; + +err_free_dma: + nb8800_dma_free(dev); +err_free_bus: + mdiobus_unregister(bus); +err_disable_clk: + clk_disable_unprepare(priv->clk); +err_free_dev: + free_netdev(dev); + + return ret; +} + +static int nb8800_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct nb8800_priv *priv = netdev_priv(ndev); + + unregister_netdev(ndev); + + mdiobus_unregister(priv->mii_bus); + + clk_disable_unprepare(priv->clk); + + nb8800_dma_free(ndev); + free_netdev(ndev); + + return 0; +} + +static struct platform_driver nb8800_driver = { + .driver = { + .name = "nb8800", + .of_match_table = nb8800_dt_ids, + }, + .probe = nb8800_probe, + .remove = nb8800_remove, +}; + +module_platform_driver(nb8800_driver); + +MODULE_DESCRIPTION("Aurora AU-NB8800 Ethernet driver"); +MODULE_AUTHOR("Mans Rullgard "); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/aurora/nb8800.h b/drivers/net/ethernet/aurora/nb8800.h new file mode 100644 index 000000000000..e5adbc2aac9f --- /dev/null +++ b/drivers/net/ethernet/aurora/nb8800.h @@ -0,0 +1,316 @@ +#ifndef _NB8800_H_ +#define _NB8800_H_ + +#include +#include +#include +#include +#include + +#define RX_DESC_COUNT 256 +#define TX_DESC_COUNT 256 + +#define NB8800_DESC_LOW 4 + +#define RX_BUF_SIZE 1552 + +#define RX_COPYBREAK 256 +#define RX_COPYHDR 128 + +#define MAX_MDC_CLOCK 2500000 + +/* Stargate Solutions SSN8800 core registers */ +#define NB8800_TX_CTL1 0x000 +#define TX_TPD BIT(5) +#define TX_APPEND_FCS BIT(4) +#define TX_PAD_EN BIT(3) +#define TX_RETRY_EN BIT(2) +#define TX_EN BIT(0) + +#define NB8800_TX_CTL2 0x001 + +#define NB8800_RX_CTL 0x004 +#define RX_BC_DISABLE BIT(7) +#define RX_RUNT BIT(6) +#define RX_AF_EN BIT(5) +#define RX_PAUSE_EN BIT(3) +#define RX_SEND_CRC BIT(2) +#define RX_PAD_STRIP BIT(1) +#define RX_EN BIT(0) + +#define NB8800_RANDOM_SEED 0x008 +#define NB8800_TX_SDP 0x14 +#define NB8800_TX_TPDP1 0x18 +#define NB8800_TX_TPDP2 0x19 +#define NB8800_SLOT_TIME 0x1c + +#define NB8800_MDIO_CMD 0x020 +#define MDIO_CMD_GO BIT(31) +#define MDIO_CMD_WR BIT(26) +#define MDIO_CMD_ADDR(x) ((x) << 21) +#define MDIO_CMD_REG(x) ((x) << 16) +#define MDIO_CMD_DATA(x) ((x) << 0) + +#define NB8800_MDIO_STS 0x024 +#define MDIO_STS_ERR BIT(31) + +#define NB8800_MC_ADDR(i) (0x028 + (i)) +#define NB8800_MC_INIT 0x02e +#define NB8800_UC_ADDR(i) (0x03c + (i)) + +#define NB8800_MAC_MODE 0x044 +#define RGMII_MODE BIT(7) +#define HALF_DUPLEX BIT(4) +#define BURST_EN BIT(3) +#define LOOPBACK_EN BIT(2) +#define GMAC_MODE BIT(0) + +#define NB8800_IC_THRESHOLD 0x050 +#define NB8800_PE_THRESHOLD 0x051 +#define NB8800_PF_THRESHOLD 0x052 +#define NB8800_TX_BUFSIZE 0x054 +#define NB8800_FIFO_CTL 0x056 +#define NB8800_PQ1 0x060 +#define NB8800_PQ2 0x061 +#define NB8800_SRC_ADDR(i) (0x06a + (i)) +#define NB8800_STAT_DATA 0x078 +#define NB8800_STAT_INDEX 0x07c +#define NB8800_STAT_CLEAR 0x07d + +#define NB8800_SLEEP_MODE 0x07e +#define SLEEP_MODE BIT(0) + +#define NB8800_WAKEUP 0x07f +#define WAKEUP BIT(0) + +/* Aurora NB8800 host interface registers */ +#define NB8800_TXC_CR 0x100 +#define TCR_LK BIT(12) +#define TCR_DS BIT(11) +#define TCR_BTS(x) (((x) & 0x7) << 8) +#define TCR_DIE BIT(7) +#define TCR_TFI(x) (((x) & 0x7) << 4) +#define TCR_LE BIT(3) +#define TCR_RS BIT(2) +#define TCR_DM BIT(1) +#define TCR_EN BIT(0) + +#define NB8800_TXC_SR 0x104 +#define TSR_DE BIT(3) +#define TSR_DI BIT(2) +#define TSR_TO BIT(1) +#define TSR_TI BIT(0) + +#define NB8800_TX_SAR 0x108 +#define NB8800_TX_DESC_ADDR 0x10c + +#define NB8800_TX_REPORT_ADDR 0x110 +#define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff) +#define TX_FIRST_DEFERRAL BIT(7) +#define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf) +#define TX_LATE_COLLISION BIT(2) +#define TX_PACKET_DROPPED BIT(1) +#define TX_FIFO_UNDERRUN BIT(0) +#define IS_TX_ERROR(r) ((r) & 0x07) + +#define NB8800_TX_FIFO_SR 0x114 +#define NB8800_TX_ITR 0x118 + +#define NB8800_RXC_CR 0x200 +#define RCR_FL BIT(13) +#define RCR_LK BIT(12) +#define RCR_DS BIT(11) +#define RCR_BTS(x) (((x) & 7) << 8) +#define RCR_DIE BIT(7) +#define RCR_RFI(x) (((x) & 7) << 4) +#define RCR_LE BIT(3) +#define RCR_RS BIT(2) +#define RCR_DM BIT(1) +#define RCR_EN BIT(0) + +#define NB8800_RXC_SR 0x204 +#define RSR_DE BIT(3) +#define RSR_DI BIT(2) +#define RSR_RO BIT(1) +#define RSR_RI BIT(0) + +#define NB8800_RX_SAR 0x208 +#define NB8800_RX_DESC_ADDR 0x20c + +#define NB8800_RX_REPORT_ADDR 0x210 +#define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF) +#define RX_MULTICAST_PKT BIT(9) +#define RX_BROADCAST_PKT BIT(8) +#define RX_LENGTH_ERR BIT(7) +#define RX_FCS_ERR BIT(6) +#define RX_RUNT_PKT BIT(5) +#define RX_FIFO_OVERRUN BIT(4) +#define RX_LATE_COLLISION BIT(3) +#define RX_ALIGNMENT_ERROR BIT(2) +#define RX_ERROR_MASK 0xfc +#define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK) + +#define NB8800_RX_FIFO_SR 0x214 +#define NB8800_RX_ITR 0x218 + +/* Sigma Designs SMP86xx additional registers */ +#define NB8800_TANGOX_PAD_MODE 0x400 +#define PAD_MODE_MASK 0x7 +#define PAD_MODE_MII 0x0 +#define PAD_MODE_RGMII 0x1 +#define PAD_MODE_GTX_CLK_INV BIT(3) +#define PAD_MODE_GTX_CLK_DELAY BIT(4) + +#define NB8800_TANGOX_MDIO_CLKDIV 0x420 +#define NB8800_TANGOX_RESET 0x424 + +/* Hardware DMA descriptor */ +struct nb8800_dma_desc { + u32 s_addr; /* start address */ + u32 n_addr; /* next descriptor address */ + u32 r_addr; /* report address */ + u32 config; +} __aligned(8); + +#define DESC_ID BIT(23) +#define DESC_EOC BIT(22) +#define DESC_EOF BIT(21) +#define DESC_LK BIT(20) +#define DESC_DS BIT(19) +#define DESC_BTS(x) (((x) & 0x7) << 16) + +/* DMA descriptor and associated data for rx. + * Allocated from coherent memory. + */ +struct nb8800_rx_desc { + /* DMA descriptor */ + struct nb8800_dma_desc desc; + + /* Status report filled in by hardware */ + u32 report; +}; + +/* Address of buffer on rx ring */ +struct nb8800_rx_buf { + struct page *page; + unsigned long offset; +}; + +/* DMA descriptors and associated data for tx. + * Allocated from coherent memory. + */ +struct nb8800_tx_desc { + /* DMA descriptor. The second descriptor is used if packet + * data is unaligned. + */ + struct nb8800_dma_desc desc[2]; + + /* Status report filled in by hardware */ + u32 report; + + /* Bounce buffer for initial unaligned part of packet */ + u8 buf[8] __aligned(8); +}; + +/* Packet in tx queue */ +struct nb8800_tx_buf { + /* Currently queued skb */ + struct sk_buff *skb; + + /* DMA address of the first descriptor */ + dma_addr_t dma_desc; + + /* DMA address of packet data */ + dma_addr_t dma_addr; + + /* Length of DMA mapping, less than skb->len if alignment + * buffer is used. + */ + unsigned int dma_len; + + /* Number of packets in chain starting here */ + unsigned int chain_len; + + /* Packet chain ready to be submitted to hardware */ + bool ready; +}; + +struct nb8800_priv { + struct napi_struct napi; + + void __iomem *base; + + /* RX DMA descriptors */ + struct nb8800_rx_desc *rx_descs; + + /* RX buffers referenced by DMA descriptors */ + struct nb8800_rx_buf *rx_bufs; + + /* Current end of chain */ + u32 rx_eoc; + + /* Value for rx interrupt time register in NAPI interrupt mode */ + u32 rx_itr_irq; + + /* Value for rx interrupt time register in NAPI poll mode */ + u32 rx_itr_poll; + + /* Value for config field of rx DMA descriptors */ + u32 rx_dma_config; + + /* TX DMA descriptors */ + struct nb8800_tx_desc *tx_descs; + + /* TX packet queue */ + struct nb8800_tx_buf *tx_bufs; + + /* Number of free tx queue entries */ + atomic_t tx_free; + + /* First free tx queue entry */ + u32 tx_next; + + /* Next buffer to transmit */ + u32 tx_queue; + + /* Start of current packet chain */ + struct nb8800_tx_buf *tx_chain; + + /* Next buffer to reclaim */ + u32 tx_done; + + /* Lock for DMA activation */ + spinlock_t tx_lock; + + struct mii_bus *mii_bus; + struct device_node *phy_node; + struct phy_device *phydev; + + /* PHY connection type from DT */ + int phy_mode; + + /* Current link status */ + int speed; + int duplex; + int link; + + /* Pause settings */ + bool pause_aneg; + bool pause_rx; + bool pause_tx; + + /* DMA base address of rx descriptors, see rx_descs above */ + dma_addr_t rx_desc_dma; + + /* DMA base address of tx descriptors, see tx_descs above */ + dma_addr_t tx_desc_dma; + + struct clk *clk; +}; + +struct nb8800_ops { + int (*init)(struct net_device *dev); + int (*reset)(struct net_device *dev); +}; + +#endif /* _NB8800_H_ */