From: Vladislav Zolotarov Date: Tue, 19 Jul 2011 01:45:02 +0000 (+0000) Subject: bnx2x: fix memory barriers X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=53e51e2f480aaa000b0a7d2704ce2b4b646a73c7;p=openwrt%2Fstaging%2Fblogic.git bnx2x: fix memory barriers Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 7a891824fab2..e4dea114d04a 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -2984,8 +2984,12 @@ static inline void bnx2x_sp_prod_update(struct bnx2x *bp) { int func = BP_FUNC(bp); - /* Make sure that BD data is updated before writing the producer */ - wmb(); + /* + * Make sure that BD data is updated before writing the producer: + * BD data is written to the memory, the producer is read from the + * memory, thus we need a full memory barrier to ensure the ordering. + */ + mb(); REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), bp->spq_prod_idx); diff --git a/drivers/net/bnx2x/bnx2x_sp.c b/drivers/net/bnx2x/bnx2x_sp.c index 5a213e476d85..cce87d5e7609 100644 --- a/drivers/net/bnx2x/bnx2x_sp.c +++ b/drivers/net/bnx2x/bnx2x_sp.c @@ -1563,8 +1563,13 @@ static int bnx2x_execute_vlan_mac(struct bnx2x *bp, idx++; } - /* Commit the data writes towards the memory */ - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ rc = bnx2x_sp_post(bp, o->ramrod_cmd, r->cid, U64_HI(r->rdata_mapping), @@ -2224,8 +2229,13 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, data->header.rule_cnt, p->rx_accept_flags, p->tx_accept_flags); - /* Commit writes towards the memory before sending a ramrod */ - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ /* Send a ramrod */ rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_FILTER_RULES, p->cid, @@ -2918,16 +2928,22 @@ static int bnx2x_mcast_setup_e2(struct bnx2x *bp, if (!o->total_pending_num) bnx2x_mcast_refresh_registry_e2(bp, o); - /* Commit writes towards the memory before sending a ramrod */ - mb(); - - /* If CLEAR_ONLY was requested - don't send a ramrod and clear + /* + * If CLEAR_ONLY was requested - don't send a ramrod and clear * RAMROD_PENDING status immediately. */ if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { raw->clear_pending(raw); return 0; } else { + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ + /* Send a ramrod */ rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_MULTICAST_RULES, raw->cid, U64_HI(raw->rdata_mapping), @@ -3404,16 +3420,22 @@ static int bnx2x_mcast_setup_e1(struct bnx2x *bp, if (rc) return rc; - /* Commit writes towards the memory before sending a ramrod */ - mb(); - - /* If CLEAR_ONLY was requested - don't send a ramrod and clear + /* + * If CLEAR_ONLY was requested - don't send a ramrod and clear * RAMROD_PENDING status immediately. */ if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { raw->clear_pending(raw); return 0; } else { + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ + /* Send a ramrod */ rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, raw->cid, U64_HI(raw->rdata_mapping), @@ -4038,8 +4060,13 @@ static int bnx2x_setup_rss(struct bnx2x *bp, data->capabilities |= ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY; } - /* Commit writes towards the memory before sending a ramrod */ - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ /* Send a ramrod */ rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_RSS_UPDATE, r->cid, @@ -4505,7 +4532,13 @@ static inline int bnx2x_q_send_setup_e1x(struct bnx2x *bp, /* Fill the ramrod data */ bnx2x_q_fill_setup_data_cmn(bp, params, rdata); - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX], U64_HI(data_mapping), @@ -4528,6 +4561,13 @@ static inline int bnx2x_q_send_setup_e2(struct bnx2x *bp, bnx2x_q_fill_setup_data_cmn(bp, params, rdata); bnx2x_q_fill_setup_data_e2(bp, params, rdata); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX], U64_HI(data_mapping), @@ -4665,7 +4705,13 @@ static inline int bnx2x_q_send_update(struct bnx2x *bp, /* Fill the ramrod data */ bnx2x_q_fill_update_data(bp, o, update_params, rdata); - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_UPDATE, o->cids[cid_index], U64_HI(data_mapping), @@ -5484,7 +5530,13 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp, rdata->path_id = BP_PATH(bp); rdata->network_cos_mode = start_params->network_cos_mode; - mb(); + /* + * No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_START, 0, U64_HI(data_mapping),