From: John Crispin <john@openwrt.org>
Date: Tue, 26 Apr 2016 11:44:03 +0000 (+0000)
Subject: lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=544efb9ad1549aad06e1d5b3503a50ca010c0ac2;p=openwrt%2Fstaging%2Fjow.git

lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A

Remove read-only flag on two partitions on BTHOMEHUBV3A:
  uboot-config - otherwise fw_setenv command cannot be used.
  ath9k-cal    - so that ath9k calibration data can be copied
                 to the partition on a newly installed board.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49250
---

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
index cfcae675e5..1bf514bbf9 100644
--- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
+++ b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
@@ -61,12 +61,10 @@
 				partition@64000 {
 					label = "uboot-config";
 					reg = <0x64000 0x004000>;
-					read-only;
 				};
 				ath9k_cal: partition@68000 {
 					label = "art-copy";
 					reg = <0x68000 0x004000>;
-					read-only;
 				};
 				partition@6c000 {
 					label = "kernel";