From: Ben Dooks Date: Thu, 4 Aug 2011 15:47:35 +0000 (+0100) Subject: ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=546fb6cbde1d990af3e28e2f6d7061ef4eef25bf;p=openwrt%2Fstaging%2Fblogic.git ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead. Signed-off-by: Ben Dooks Signed-off-by: Sascha Hauer --- diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa70266..68934ea8725a 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT,