From: Guenter Roeck Date: Tue, 17 Feb 2015 17:36:22 +0000 (-0800) Subject: net: phy: Fix verification of EEE support in phy_init_eee X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=54da5a8be3c1e924c35480eb44c6e9b275f6444e;p=openwrt%2Fstaging%2Fblogic.git net: phy: Fix verification of EEE support in phy_init_eee phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index cdcac6aa4260..52cd8db2c57d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -235,6 +235,25 @@ static inline unsigned int phy_find_valid(unsigned int idx, u32 features) return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; } +/** + * phy_check_valid - check if there is a valid PHY setting which matches + * speed, duplex, and feature mask + * @speed: speed to match + * @duplex: duplex to match + * @features: A mask of the valid settings + * + * Description: Returns true if there is a valid setting, false otherwise. + */ +static inline bool phy_check_valid(int speed, int duplex, u32 features) +{ + unsigned int idx; + + idx = phy_find_valid(phy_find_setting(speed, duplex), features); + + return settings[idx].speed == speed && settings[idx].duplex == duplex && + (settings[idx].setting & features); +} + /** * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex * @phydev: the target phy_device struct @@ -1045,7 +1064,6 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) int eee_lp, eee_cap, eee_adv; u32 lp, cap, adv; int status; - unsigned int idx; /* Read phy status to properly get the right settings */ status = phy_read_status(phydev); @@ -1077,8 +1095,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); - idx = phy_find_setting(phydev->speed, phydev->duplex); - if (!(lp & adv & settings[idx].setting)) + if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv)) goto eee_exit_err; if (clk_stop_enable) {