From: Axel Lin Date: Fri, 15 Feb 2019 01:42:49 +0000 (+0800) Subject: regulator: pv88060: Fix .ops for PV88060_SW X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=55e72728cd2dd9f9cd1cec92c4171aa63d000c30;p=openwrt%2Fstaging%2Fblogic.git regulator: pv88060: Fix .ops for PV88060_SW There is no vsel_reg/vsel_mask settings for PV88060_ID_SWx, so don't use pv88060_ldo_ops for PV88060_SW. The PV88060_ID_SWx is fixed voltage, set .fixed_uV instead of .min_uV then regulator core will automatically support get_voltage and list_voltage. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c index a9446056435f..d5dab9bef378 100644 --- a/drivers/regulator/pv88060-regulator.c +++ b/drivers/regulator/pv88060-regulator.c @@ -184,6 +184,12 @@ static const struct regulator_ops pv88060_ldo_ops = { .list_voltage = regulator_list_voltage_linear, }; +static const struct regulator_ops pv88060_sw_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + #define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \ {\ .desc = {\ @@ -237,9 +243,8 @@ static const struct regulator_ops pv88060_ldo_ops = { .regulators_node = of_match_ptr("regulators"),\ .type = REGULATOR_VOLTAGE,\ .owner = THIS_MODULE,\ - .ops = &pv88060_ldo_ops,\ - .min_uV = max,\ - .uV_step = 0,\ + .ops = &pv88060_sw_ops,\ + .fixed_uV = max,\ .n_voltages = 1,\ .enable_reg = PV88060_REG_##regl_name##_CONF,\ .enable_mask = PV88060_SW_EN,\