From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 18 Jan 2013 17:41:07 +0000 (-0700)
Subject: staging: comedi: addi_apci_16xx: board does not have analog inputs
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=564aa830e61df7c10d36cab31dd975a4fe003c97;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: addi_apci_16xx: board does not have analog inputs

The boards supported by this driver do not have analog inputs.
Remove the subdevice init for them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 658943bc85f7..6417b35eb467 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -183,39 +183,7 @@ static int apci16xx_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise AI Subdevice Structures */
 	s = &dev->subdevices[0];
-	if ((devpriv->s_EeParameters.i_NbrAiChannel)
-		|| (this_board->i_NbrAiChannelDiff)) {
-		dev->read_subdev = s;
-		s->type = COMEDI_SUBD_AI;
-		s->subdev_flags =
-			SDF_READABLE | SDF_COMMON | SDF_GROUND
-			| SDF_DIFF;
-		if (devpriv->s_EeParameters.i_NbrAiChannel) {
-			s->n_chan =
-				devpriv->s_EeParameters.i_NbrAiChannel;
-			devpriv->b_SingelDiff = 0;
-		} else {
-			s->n_chan = this_board->i_NbrAiChannelDiff;
-			devpriv->b_SingelDiff = 1;
-		}
-		s->maxdata = devpriv->s_EeParameters.i_AiMaxdata;
-		s->len_chanlist = this_board->i_AiChannelList;
-		s->range_table = this_board->pr_AiRangelist;
-
-		/* Set the initialisation flag */
-		devpriv->b_AiInitialisation = 1;
-
-		s->insn_config = this_board->ai_config;
-		s->insn_read = this_board->ai_read;
-		s->insn_write = this_board->ai_write;
-		s->insn_bits = this_board->ai_bits;
-		s->do_cmdtest = this_board->ai_cmdtest;
-		s->do_cmd = this_board->ai_cmd;
-		s->cancel = this_board->ai_cancel;
-
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
+	s->type = COMEDI_SUBD_UNUSED;
 
 	/*  Allocate and Initialise AO Subdevice Structures */
 	s = &dev->subdevices[1];