From: David Bauer Date: Sun, 7 Oct 2018 13:13:31 +0000 (+0200) Subject: ath79: add support for TP-Link TL-WA901ND v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5815bb2e41389f484516cf62008c42a4e9ff8327;p=openwrt%2Fstaging%2Fynezz.git ath79: add support for TP-Link TL-WA901ND v2 This commit adds support for the TP-Link TL-WR901ND v2 access point. CPU: Atheros AR9132 400MHz RAM: 32MB FLASH: 4MiB WiFi: Atheros AR9103 3x3:2 bgn LED: Power (static on) LAN (controlled by PHY) SYS, WiFi, QSS toggleable BTN: Reset, QSS Installation: Upload the factory image via the vendor-GUI. Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 6626d99af8..10311bf684 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -18,6 +18,7 @@ ath79_setup_interfaces() tplink,tl-mr10u|\ tplink,tl-mr3020-v1|\ tplink,tl-mr3040-v2|\ + tplink,tl-wa901nd-v2|\ tplink,tl-wr703n|\ ubnt,bullet-m|\ ubnt,nanostation-ac-loco|\ diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts new file mode 100644 index 0000000000..150b76e7a4 --- /dev/null +++ b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include + +#include "ar9132.dtsi" + +/ { + compatible = "tplink,tl-wa901nd-v2", "qca,ar9132"; + model = "TP-Link TL-WA901ND v2"; + + aliases { + led-boot = &system; + led-failsafe = &system; + led-running = &system; + led-upgrade = &system; + }; + + extosc: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + qss { + label = "qss"; + linux,code = ; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + qss { + label = "tp-link:green:qss"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&pll { + clocks = <&extosc>; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@1 { + label = "firmware"; + reg = <0x020000 0x3D0000>; + }; + + art: partition@2 { + label = "art"; + reg = <0x3F0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@c { + reg = <0xc>; + phy-mode = "mii"; + }; +}; + +ð0 { + status = "okay"; + + phy-mode = "mii"; + mtd-mac-address = <&uboot 0x1fc00>; + + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk index dadcd24b42..e0c7e283c8 100644 --- a/target/linux/ath79/image/tiny-tp-link.mk +++ b/target/linux/ath79/image/tiny-tp-link.mk @@ -51,6 +51,14 @@ define Device/tplink_tl-mr3420-v1 endef TARGET_DEVICES += tplink_tl-mr3420-v1 +define Device/tplink_tl-wa901nd-v2 + $(Device/tplink-4m) + ATH_SOC := ar9132 + DEVICE_TITLE := TP-Link TL-WA901ND v2 + TPLINK_HWID := 0x09010002 +endef +TARGET_DEVICES += tplink_tl-wa901nd-v2 + define Device/tplink_tl-wr703n $(Device/tplink-4mlzma) ATH_SOC := ar9331