From: Ramneek Mehresh Date: Tue, 20 Mar 2012 05:05:50 +0000 (+0530) Subject: fsl/usb: Add controller version based ULPI and UTMI phy support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=58c559e6509f276d0afb4621b2122e994e70160c;p=openwrt%2Fstaging%2Fblogic.git fsl/usb: Add controller version based ULPI and UTMI phy support Add support for ULPI and UTMI PHYs based on usb controller version info read from device-tree Example of USB Controller versioning info: Version 1.2 and below : MPC8536, MPC8315, etc Version 1.6 : P1020, P1010, P2020, P5020, etc Version 2.2 : PSC9131, PSC9132, P3060, etc No changes for non-DT users Signed-off-by: Ramneek Mehresh Acked-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5f94e79cd6b9..6087fa698a38 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Li Yang @@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc"; static const char driver_desc[] = DRIVER_DESC; static struct usb_dr_device *dr_regs; -#ifndef CONFIG_ARCH_MXC + static struct usb_sys_interface *usb_sys_regs; -#endif /* it is initialized in probe() */ static struct fsl_udc *udc_controller = NULL; @@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc) { unsigned int tmp, portctrl, ep_num; unsigned int max_no_of_ep; -#ifndef CONFIG_ARCH_MXC unsigned int ctrl; -#endif unsigned long timeout; + #define FSL_UDC_RESET_TIMEOUT 1000 /* Config PHY interface */ @@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc) portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH); switch (udc->phy_mode) { case FSL_USB2_PHY_ULPI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl &= ~USB_CTRL_UTMI_PHY_EN; + ctrl |= USB_CTRL_USB_EN; + __raw_writel(ctrl, &usb_sys_regs->control); + } + } portctrl |= PORTSCX_PTS_ULPI; break; case FSL_USB2_PHY_UTMI_WIDE: portctrl |= PORTSCX_PTW_16BIT; /* fall through */ case FSL_USB2_PHY_UTMI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= (USB_CTRL_UTMI_PHY_EN | + USB_CTRL_USB_EN); + __raw_writel(ctrl, &usb_sys_regs->control); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI + PHY CLK to become stable - 10ms*/ + } + } portctrl |= PORTSCX_PTS_UTMI; break; case FSL_USB2_PHY_SERIAL: diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index e651469fd39b..1212646841a3 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -1,4 +1,12 @@ /* + * Copyright (C) 2004,2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * * Freescale USB device/endpoint management registers */ #ifndef __FSL_USB2_UDC_H @@ -348,6 +356,9 @@ struct usb_sys_interface { /* control Register Bit Masks */ #define USB_CTRL_IOENB 0x00000004 #define USB_CTRL_ULPI_INT0EN 0x00000001 +#define USB_CTRL_UTMI_PHY_EN 0x00000200 +#define USB_CTRL_USB_EN 0x00000004 +#define USB_CTRL_ULPI_PHY_CLK_SEL 0x00000400 /* Endpoint Queue Head data struct * Rem: all the variables of qh are LittleEndian Mode diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3e7345172e03..653e577ab3ee 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -211,19 +211,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, +static void ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc; - struct usb_hcd *hcd = ehci_to_hcd(ehci); + u32 portsc, temp; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev->platform_data; + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return; + } portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); switch (phy_mode) { case FSL_USB2_PHY_ULPI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + } portsc |= PORT_PTS_ULPI; break; case FSL_USB2_PHY_SERIAL: @@ -233,6 +246,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + UTMI_PHY_EN | USB_CTRL_USB_EN); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } /* enable UTMI PHY */ setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; @@ -271,7 +292,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -285,9 +306,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); } if (pdata->have_sysif_regs) { diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 863fb0c080d7..88403684d10b 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc. +/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc. * Copyright (c) 2005 MontaVista Software * * This program is free software; you can redistribute it and/or modify it @@ -50,4 +50,15 @@ #define CTRL_UTMI_PHY_EN (1<<9) #define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e + +/* control Register Bit Masks */ +#define ULPI_INT_EN (1<<0) +#define WU_INT_EN (1<<1) +#define USB_CTRL_USB_EN (1<<2) +#define LINE_STATE_FILTER__EN (1<<3) +#define KEEP_OTG_ON (1<<4) +#define OTG_PORT (1<<5) +#define PLL_RESET (1<<8) +#define UTMI_PHY_EN (1<<9) +#define ULPI_PHY_CLK_SEL (1<<10) #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index ab333ac6071d..22ff6b3a676f 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -119,6 +119,39 @@ error: static const struct of_device_id fsl_usb2_mph_dr_of_match[]; +static int usb_get_ver_info(struct device_node *np) +{ + int ver = -1; + + /* + * returns 1 for usb controller version 1.6 + * returns 2 for usb controller version 2.2 + * returns 0 otherwise + */ + if (of_device_is_compatible(np, "fsl-usb2-dr")) { + if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + + if (ver > -1) + return ver; + } + + if (of_device_is_compatible(np, "fsl-usb2-mph")) { + if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + } + + return ver; +} + static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; @@ -166,6 +199,14 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) prop = of_get_property(np, "phy_type", NULL); pdata->phy_mode = determine_usb_phy(prop); + pdata->controller_ver = usb_get_ver_info(np); + + if (pdata->have_sysif_regs) { + if (pdata->controller_ver < 0) { + dev_warn(&ofdev->dev, "Could not get controller version\n"); + return -ENODEV; + } + } for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) { if (!dev_data->drivers[i]) diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index fffdf00f87b9..15be561e7397 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -6,7 +6,7 @@ * * Maintainer: Kumar Gala * - * Copyright 2004 Freescale Semiconductor, Inc + * Copyright 2004,2012 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,6 +17,12 @@ #ifndef _FSL_DEVICE_H_ #define _FSL_DEVICE_H_ +#define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI + PHY CLK to become stable - 10ms*/ +#define FSL_USB_VER_OLD 0 +#define FSL_USB_VER_1_6 1 +#define FSL_USB_VER_2_2 2 + #include /* @@ -63,6 +69,7 @@ struct platform_device; struct fsl_usb2_platform_data { /* board specific information */ + int controller_ver; enum fsl_usb2_operating_modes operating_mode; enum fsl_usb2_phy_modes phy_mode; unsigned int port_enables;