From: Yaniv Gardi Date: Thu, 10 Mar 2016 15:37:08 +0000 (+0200) Subject: scsi: ufs: verify hba controller hce reg value X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=596585a285a41993f26efab686e1ef20fc16a04a;p=openwrt%2Fstaging%2Fblogic.git scsi: ufs: verify hba controller hce reg value Sometimes due to hw issues it takes some time to the host controller register to update. In order to verify the register has updated, a polling is done until its value is set. In addition the functions ufshcd_hba_stop() and ufshcd_wait_for_register() was updated with an additional input parameter, indicating the timeout between reads will be done by sleeping or spinning the cpu. Reviewed-by: Hannes Reinecke Signed-off-by: Raviv Shvili Signed-off-by: Yaniv Gardi Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 3400cebc5649..80031e6a63f5 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -240,11 +240,13 @@ static inline void ufshcd_disable_irq(struct ufs_hba *hba) * @val - wait condition * @interval_us - polling interval in microsecs * @timeout_ms - timeout in millisecs + * @can_sleep - perform sleep or just spin * * Returns -ETIMEDOUT on error, zero on success */ -static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, - u32 val, unsigned long interval_us, unsigned long timeout_ms) +int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long interval_us, + unsigned long timeout_ms, bool can_sleep) { int err = 0; unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); @@ -253,9 +255,10 @@ static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, val = val & mask; while ((ufshcd_readl(hba, reg) & mask) != val) { - /* wakeup within 50us of expiry */ - usleep_range(interval_us, interval_us + 50); - + if (can_sleep) + usleep_range(interval_us, interval_us + 50); + else + udelay(interval_us); if (time_after(jiffies, timeout)) { if ((ufshcd_readl(hba, reg) & mask) != val) err = -ETIMEDOUT; @@ -1459,7 +1462,7 @@ ufshcd_clear_cmd(struct ufs_hba *hba, int tag) */ err = ufshcd_wait_for_register(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL, - mask, ~mask, 1000, 1000); + mask, ~mask, 1000, 1000, true); return err; } @@ -2814,6 +2817,23 @@ out: return err; } +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + * @can_sleep: perform sleep or just spin + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep) +{ + int err; + + ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); + err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, + CONTROLLER_ENABLE, CONTROLLER_DISABLE, + 10, 1, can_sleep); + if (err) + dev_err(hba->dev, "%s: Controller disable failed\n", __func__); +} + /** * ufshcd_hba_enable - initialize the controller * @hba: per adapter instance @@ -2834,18 +2854,9 @@ static int ufshcd_hba_enable(struct ufs_hba *hba) * development and testing of this driver. msleep can be changed to * mdelay and retry count can be reduced based on the controller. */ - if (!ufshcd_is_hba_active(hba)) { - + if (!ufshcd_is_hba_active(hba)) /* change controller state to "reset state" */ - ufshcd_hba_stop(hba); - - /* - * This delay is based on the testing done with UFS host - * controller FPGA. The delay can be changed based on the - * host controller used. - */ - msleep(5); - } + ufshcd_hba_stop(hba, true); /* UniPro link is disabled at this point */ ufshcd_set_link_off(hba); @@ -3898,7 +3909,7 @@ static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) /* poll for max. 1 sec to clear door bell register by h/w */ err = ufshcd_wait_for_register(hba, REG_UTP_TASK_REQ_DOOR_BELL, - mask, 0, 1000, 1000); + mask, 0, 1000, 1000, true); out: return err; } @@ -4180,7 +4191,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) /* Reset the host controller */ spin_lock_irqsave(hba->host->host_lock, flags); - ufshcd_hba_stop(hba); + ufshcd_hba_stop(hba, false); spin_unlock_irqrestore(hba->host->host_lock, flags); err = ufshcd_hba_enable(hba); @@ -5133,7 +5144,7 @@ static int ufshcd_link_state_transition(struct ufs_hba *hba, * Change controller state to "reset state" which * should also put the link in off/reset state */ - ufshcd_hba_stop(hba); + ufshcd_hba_stop(hba, true); /* * TODO: Check if we need any delay to make sure that * controller is reset @@ -5609,7 +5620,7 @@ void ufshcd_remove(struct ufs_hba *hba) scsi_remove_host(hba->host); /* disable interrupts */ ufshcd_disable_intr(hba, hba->intr_mask); - ufshcd_hba_stop(hba); + ufshcd_hba_stop(hba, true); scsi_host_put(hba->host); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 9ae7f85b2a33..a6d35724ccdc 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -590,15 +590,9 @@ int ufshcd_alloc_host(struct device *, struct ufs_hba **); void ufshcd_dealloc_host(struct ufs_hba *); int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int); void ufshcd_remove(struct ufs_hba *); - -/** - * ufshcd_hba_stop - Send controller to reset state - * @hba: per adapter instance - */ -static inline void ufshcd_hba_stop(struct ufs_hba *hba) -{ - ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); -} +int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long interval_us, + unsigned long timeout_ms, bool can_sleep); static inline void check_upiu_size(void) {