From: Samuel Ortiz <samuel@ortiz.org>
Date: Sat, 21 Apr 2007 05:12:07 +0000 (-0700)
Subject: [IrDA]: Adding carriage returns to mcs7780 debug statements
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=599b1fa91439cff8605a71f1a2b5bb42c177b667;p=openwrt%2Fstaging%2Fblogic.git

[IrDA]: Adding carriage returns to mcs7780 debug statements

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 54d1d543c92c..0de867288a47 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -200,14 +200,14 @@ static inline int mcs_setup_transceiver_vishay(struct mcs_cb *mcs)
 /* Setup a communication between mcs7780 and agilent chip. */
 static inline int mcs_setup_transceiver_agilent(struct mcs_cb *mcs)
 {
-	IRDA_WARNING("This transceiver type is not supported yet.");
+	IRDA_WARNING("This transceiver type is not supported yet.\n");
 	return 1;
 }
 
 /* Setup a communication between mcs7780 and sharp chip. */
 static inline int mcs_setup_transceiver_sharp(struct mcs_cb *mcs)
 {
-	IRDA_WARNING("This transceiver type is not supported yet.");
+	IRDA_WARNING("This transceiver type is not supported yet.\n");
 	return 1;
 }
 
@@ -279,7 +279,7 @@ static inline int mcs_setup_transceiver(struct mcs_cb *mcs)
 		break;
 
 	default:
-		IRDA_WARNING("Unknown transceiver type: %d",
+		IRDA_WARNING("Unknown transceiver type: %d\n",
 			     mcs->transceiver_type);
 		ret = 1;
 	}
@@ -318,7 +318,7 @@ static inline int mcs_setup_transceiver(struct mcs_cb *mcs)
 		return ret;
 
 error:
-	IRDA_ERROR("%s", msg);
+	IRDA_ERROR("%s\n", msg);
 	return ret;
 }
 
@@ -587,7 +587,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
 	} while(cnt++ < 100 && (rval & MCS_IRINTX));
 
 	if(cnt >= 100) {
-		IRDA_ERROR("unable to change speed");
+		IRDA_ERROR("unable to change speed\n");
 		ret = -EIO;
 		goto error;
 	}
@@ -638,7 +638,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
 
 		default:
 			ret = 1;
-			IRDA_WARNING("Unknown transceiver type: %d",
+			IRDA_WARNING("Unknown transceiver type: %d\n",
 				     mcs->transceiver_type);
 		}
 	if (unlikely(ret))
@@ -733,7 +733,7 @@ static int mcs_net_open(struct net_device *netdev)
 	sprintf(hwname, "usb#%d", mcs->usbdev->devnum);
 	mcs->irlap = irlap_open(netdev, &mcs->qos, hwname);
 	if (!mcs->irlap) {
-		IRDA_ERROR("mcs7780: irlap_open failed");
+		IRDA_ERROR("mcs7780: irlap_open failed\n");
 		goto error2;
 	}
 
@@ -862,7 +862,7 @@ static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 			  mcs->out_buf, wraplen, mcs_send_irq, mcs);
 
 	if ((ret = usb_submit_urb(mcs->tx_urb, GFP_ATOMIC))) {
-		IRDA_ERROR("failed tx_urb: %d", ret);
+		IRDA_ERROR("failed tx_urb: %d\n", ret);
 		switch (ret) {
 		case -ENODEV:
 		case -EPIPE:
@@ -897,7 +897,7 @@ static int mcs_probe(struct usb_interface *intf,
 	if (!ndev)
 		goto error1;
 
-	IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.", udev->devnum);
+	IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
 
 	/* what is it realy for? */
 	SET_MODULE_OWNER(ndev);
@@ -905,7 +905,7 @@ static int mcs_probe(struct usb_interface *intf,
 
 	ret = usb_reset_configuration(udev);
 	if (ret != 0) {
-		IRDA_ERROR("mcs7780: usb reset configuration failed");
+		IRDA_ERROR("mcs7780: usb reset configuration failed\n");
 		goto error2;
 	}
 
@@ -950,7 +950,7 @@ static int mcs_probe(struct usb_interface *intf,
 	if (ret != 0)
 		goto error2;
 
-	IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s",
+	IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n",
 		   ndev->name);
 
 	mcs->transceiver_type = transceiver_type;
@@ -981,7 +981,7 @@ static void mcs_disconnect(struct usb_interface *intf)
 	free_netdev(mcs->netdev);
 
 	usb_set_intfdata(intf, NULL);
-	IRDA_DEBUG(0, "MCS7780 now disconnected.");
+	IRDA_DEBUG(0, "MCS7780 now disconnected.\n");
 }
 
 /* Module insertion */
@@ -992,7 +992,7 @@ static int __init mcs_init(void)
 	/* register this driver with the USB subsystem */
 	result = usb_register(&mcs_driver);
 	if (result)
-		IRDA_ERROR("usb_register failed. Error number %d", result);
+		IRDA_ERROR("usb_register failed. Error number %d\n", result);
 
 	return result;
 }