From: Jacopo Mondi Date: Thu, 13 Sep 2018 13:59:49 +0000 (-0400) Subject: media: dt-bindings: media: renesas-ceu: Refer to video-interfaces.txt X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=59e7d5112799f32702f16fe388743c59e5513f08;p=openwrt%2Fstaging%2Fblogic.git media: dt-bindings: media: renesas-ceu: Refer to video-interfaces.txt Refer to video-interfaces.txt when describing standard properties. Signed-off-by: Jacopo Mondi Reviewed-by: Rob Herring Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt index 8a7a616e9019..23e911067c8f 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.txt +++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt @@ -17,15 +17,15 @@ Required properties: The CEU supports a single parallel input and should contain a single 'port' subnode with a single 'endpoint'. Connection to input devices are modeled according to the video interfaces OF bindings specified in: -Documentation/devicetree/bindings/media/video-interfaces.txt +[1] Documentation/devicetree/bindings/media/video-interfaces.txt Optional endpoint properties applicable to parallel input bus described in the above mentioned "video-interfaces.txt" file are supported. -- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. - If property is not present, default is active high. -- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. - If property is not present, default is active high. +- hsync-active: See [1] for description. If property is not present, + default is active high. +- vsync-active: See [1] for description. If property is not present, + default is active high. Example: