From: Florian Fainelli Date: Fri, 11 Jul 2014 23:55:15 +0000 (-0700) Subject: net: bcmgenet: fix RGMII_MODE_EN bit X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5a680fad352525c3461ed1f7e3269d31a9128a07;p=openwrt%2Fstaging%2Fblogic.git net: bcmgenet: fix RGMII_MODE_EN bit RGMII_MODE_EN bit was defined to 0, while it is actually 6. It was not much of a problem on older designs where this was a no-op, and the RGMII data-path would always be enabled, but newer GENET controllers need to explicitely enable their RGMII data-pad using this bit. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 0f117105fed1..e23c993b1362 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -331,9 +331,9 @@ struct bcmgenet_mib_counters { #define EXT_ENERGY_DET_MASK (1 << 12) #define EXT_RGMII_OOB_CTRL 0x0C -#define RGMII_MODE_EN (1 << 0) #define RGMII_LINK (1 << 4) #define OOB_DISABLE (1 << 5) +#define RGMII_MODE_EN (1 << 6) #define ID_MODE_DIS (1 << 16) #define EXT_GPHY_CTRL 0x1C