From: Benjamin Herrenschmidt Date: Fri, 7 Dec 2018 04:05:04 +0000 (+1100) Subject: Revert "net/ibm/emac: wrong bit is used for STA control" X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5b3279e2cba2238b37f6c18adfdea8bddb32715a;p=openwrt%2Fstaging%2Fblogic.git Revert "net/ibm/emac: wrong bit is used for STA control" This reverts commit 624ca9c33c8a853a4a589836e310d776620f4ab9. This commit is completely bogus. The STACR register has two formats, old and new, depending on the version of the IP block used. There's a pair of device-tree properties that can be used to specify the format used: has-inverted-stacr-oc has-new-stacr-staopc What this commit did was to change the bit definition used with the old parts to match the new parts. This of course breaks the driver on all the old ones. Instead, the author should have set the appropriate properties in the device-tree for the variant used on his board. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h index e2f80cca9bed..0d2de6f67676 100644 --- a/drivers/net/ethernet/ibm/emac/emac.h +++ b/drivers/net/ethernet/ibm/emac/emac.h @@ -231,7 +231,7 @@ struct emac_regs { #define EMAC_STACR_PHYE 0x00004000 #define EMAC_STACR_STAC_MASK 0x00003000 #define EMAC_STACR_STAC_READ 0x00001000 -#define EMAC_STACR_STAC_WRITE 0x00000800 +#define EMAC_STACR_STAC_WRITE 0x00002000 #define EMAC_STACR_OPBC_MASK 0x00000C00 #define EMAC_STACR_OPBC_50 0x00000000 #define EMAC_STACR_OPBC_66 0x00000400