From: Marek Szyprowski Date: Mon, 20 Oct 2014 10:45:38 +0000 (+0200) Subject: usb: dwc2: gadget: use soft-disconnect udc feature in pullup() method X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5b9451f8c4fbaf0549139755fb45ff2b57975b7f;p=openwrt%2Fstaging%2Fblogic.git usb: dwc2: gadget: use soft-disconnect udc feature in pullup() method This patch moves udc initialization from pullup() method to s3c_hsotg_udc_start(), so that method ends with hardware fully initialized and left in soft-disconnected state. After this change, the pullup() method simply clears soft-disconnect start() when called with is_on=1. For completeness, a call to s3c_hsotg_core_disconnect() has been added when pullup() method is called with is_on=0, what puts the udc hardware back to soft-disconnected state. Acked-by: Paul Zimmerman Signed-off-by: Marek Szyprowski Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 68865e5f759b..5872db97699f 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2880,6 +2880,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct s3c_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; int ret; if (!hsotg) { @@ -2918,7 +2919,13 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, s3c_hsotg_phy_enable(hsotg); + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_init(hsotg); + s3c_hsotg_core_init_disconnected(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); + return 0; err: @@ -2990,9 +2997,9 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) spin_lock_irqsave(&hsotg->lock, flags); if (is_on) { clk_enable(hsotg->clk); - s3c_hsotg_core_init_disconnected(hsotg); s3c_hsotg_core_connect(hsotg); } else { + s3c_hsotg_core_disconnect(hsotg); clk_disable(hsotg->clk); }