From: Maxim Anisimov Date: Tue, 9 Jan 2018 11:25:53 +0000 (+0300) Subject: ramips: add support for TP-Link Archer C20 v4 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5bdd238b634a34b038fbea9046893de29a77c000;p=openwrt%2Fstaging%2Fdedeckeh.git ramips: add support for TP-Link Archer C20 v4 TP-Link Archer C20 v4 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 5x 10/100 Mbps Ethernet - 3x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power input switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. * MT7610EN ac chip isn't not supported by LEDE. Therefore 5Ghz won't work. Flash instruction: The only way to flash LEDE image in ArcherC20v4 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC20v4-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 37393eeb27..0b0feb4156 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -388,6 +388,11 @@ tplink,c20-v1) set_usb_led "$boardname:blue:usb" ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" ;; +tplink,c20-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" + ;; tplink,tl-mr3420-v5) set_usb_led "$boardname:green:usb" set_wifi_led "$boardname:green:wlan" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index a90fe96f91..7deebbcef0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -173,6 +173,7 @@ ramips_setup_interfaces() mzk-wdpr|\ rb750gr3|\ rt-n14u|\ + tplink,c20-v4|\ tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index df9858cb32..cf37fcf487 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -38,6 +38,7 @@ get_status_led() { nbg-419n2|\ pwh2004|\ r6220|\ + tplink,c20-v4|\ tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 71ad0c1b83..bce49a61d7 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -241,6 +241,7 @@ platform_check_image() { c50|\ mr200|\ tplink,c20-v1|\ + tplink,c20-v4|\ tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ diff --git a/target/linux/ramips/dts/ArcherC20v4.dts b/target/linux/ramips/dts/ArcherC20v4.dts new file mode 100644 index 0000000000..be0c21a9a9 --- /dev/null +++ b/target/linux/ramips/dts/ArcherC20v4.dts @@ -0,0 +1,170 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "tplink,c20-v4", "mediatek,mt7628an-soc"; + model = "TP-Link Archer C20 v4"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan { + label = "c20-v4:green:lan"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + power { + label = "c20-v4:green:power"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "c20-v4:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "c20-v4:orange:wan"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "c20-v4:green:wlan5g"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "c20-v4:green:wlan2g"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c20-v4:green:wps"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&wmac { + status = "okay"; + mediatek,mtd-eeprom = <&radio 0x0>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-2)>; +}; + +ðernet { + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "wllll"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&radio 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-1)>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 8bbbcf6ad9..60864cfed3 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -139,6 +139,19 @@ define Device/tl-wr841n-v13 endef TARGET_DEVICES += tl-wr841n-v13 +define Device/tplink_c20-v4 + $(Device/tplink) + DTS := ArcherC20v4 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link ArcherC20 v4 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0xc200004 + TPLINK_HWREV := 0x1 + TPLINK_HWREVADD := 0x4 + TPLINK_HVERSION := 3 +endef +TARGET_DEVICES += tplink_c20-v4 + define Device/tplink_tl-mr3420-v5 $(Device/tplink) DTS := TL-MR3420V5