From: Stijn Tintel Date: Wed, 22 Feb 2017 10:42:36 +0000 (+0100) Subject: Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)" X-Git-Tag: v18.06.0-rc1~3534 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5c49fecf72c9c10b1d302b0a9d4db3b4ce3c782c;p=openwrt%2Fstaging%2Fpepe2k.git Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c index 9b40cd7e42..8e67f4b17d 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8327.c +++ b/target/linux/generic/files/drivers/net/phy/ar8327.c @@ -1028,7 +1028,6 @@ ar8327_sw_get_eee(struct switch_dev *dev, return 0; } -#if 0 static void ar8327_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1) { @@ -1100,7 +1099,6 @@ static void ar8327_get_arl_entry(struct ar8xxx_priv *priv, break; } } -#endif static int ar8327_sw_hw_apply(struct switch_dev *dev) @@ -1401,9 +1399,7 @@ const struct ar8xxx_chip ar8327_chip = { .vtu_load_vlan = ar8327_vtu_load_vlan, .phy_fixup = ar8327_phy_fixup, .set_mirror_regs = ar8327_set_mirror_regs, -#if 0 .get_arl_entry = ar8327_get_arl_entry, -#endif .sw_hw_apply = ar8327_sw_hw_apply, .num_mibs = ARRAY_SIZE(ar8236_mibs), @@ -1438,9 +1434,7 @@ const struct ar8xxx_chip ar8337_chip = { .vtu_load_vlan = ar8327_vtu_load_vlan, .phy_fixup = ar8327_phy_fixup, .set_mirror_regs = ar8327_set_mirror_regs, -#if 0 .get_arl_entry = ar8327_get_arl_entry, -#endif .sw_hw_apply = ar8327_sw_hw_apply, .num_mibs = ARRAY_SIZE(ar8236_mibs),