From: Daniel Vetter Date: Fri, 7 Mar 2014 19:34:46 +0000 (+0100) Subject: drm/i915: Don't enable display error interrupts from the start X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5c673b60a9b3b23486f4eda75c72e91d31d26a2b;p=openwrt%2Fstaging%2Fblogic.git drm/i915: Don't enable display error interrupts from the start We need to enable interrupt processing before all the modeset state is set up. But that means we can fall over when we get a pipe underrun. This shouldn't happen as long as the bios works correctly but as usual this turns out to be wishful thinking. So disable error interrupts at irq install time and rely on the re-enabling code in the modeset functions to take care of this. Note that due to the SDE interrupt handling race we must uncondtionally enable all interrupt sources in SDEIER, hence no need to enable the SERR bit specifically. On gmch platforms we don't have an explicit enable/mask bit for fifo underruns. Fixing this up would require a bit of software tracking, hence is material for a separate patch. To make this possible we need to switch all gmch platforms to the new pipestat interrupt handling scheme Imre implemented for vlv, and then also add a safe form of sw state checking to __cpu_fifo_underrun_reporting_enabled a bit. v2: Also handle the ilk/snb cpu fifo underrun bits accordingly. Spotted by Ville. v3: Also handle the south interrupt underrun bits on ibx. Again spotted by Ville. Reported-by: Rob Clark Cc: Rob Clark Cc: Ville Syrjälä Cc: stable@vger.kernel.org Tested-by: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ec9b8a4b04ed..d554169ac592 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2782,10 +2782,9 @@ static void ibx_irq_postinstall(struct drm_device *dev) return; if (HAS_PCH_IBX(dev)) { - mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER | - SDE_TRANSA_FIFO_UNDER | SDE_POISON; + mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; } else { - mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT; + mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; I915_WRITE(SERR_INT, I915_READ(SERR_INT)); } @@ -2845,20 +2844,19 @@ static int ironlake_irq_postinstall(struct drm_device *dev) display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB | DE_PLANEB_FLIP_DONE_IVB | - DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB | - DE_ERR_INT_IVB); + DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB); extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | - DE_PIPEA_VBLANK_IVB); + DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB); I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); } else { display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE | DE_AUX_CHANNEL_A | - DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN | DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE | DE_POISON); - extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT; + extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT | + DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN; } dev_priv->irq_mask = ~display_mask; @@ -2974,9 +2972,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE | GEN8_PIPE_CDCLK_CRC_DONE | - GEN8_PIPE_FIFO_UNDERRUN | GEN8_DE_PIPE_IRQ_FAULT_ERRORS; - uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK; + uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | + GEN8_PIPE_FIFO_UNDERRUN; int pipe; dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked; dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;