From: Shubhangi Shrivastava Date: Wed, 30 Mar 2016 12:35:24 +0000 (+0530) Subject: drm/i915: Reorganizing intel_dp_check_link_status X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5c9114d0ced2f16d1bfeda650b4acf95159f4759;p=openwrt%2Fstaging%2Fblogic.git drm/i915: Reorganizing intel_dp_check_link_status When created originally intel_dp_check_link_status() was supposed to handle only link training for short pulse but has grown into handler for short pulse itself. This patch cleans up this function by splitting it into two halves. First intel_dp_short_pulse() is called, which will be entry point and handle all logic for short pulse handling while intel_dp_check_link_status() will retain its original purpose of only doing link status related work. intel_dp_short_pulse: All existing code other than link status read and link training upon error status. intel_dp_check_link_status: The link status should be read on short pulse irrespective of panel being enabled or not so intel_dp_get_link_status() performs dpcd read first then based on crtc active / enabled it will perform the link training. This is because short pulse is a generic interrupt which should always be handled, because it may mean: 1. Hotplug/unplug of MST panel 2. Hotplug/unplug of dongle 3. Link status change for other DP panels v2: Added WARN_ON to intel_dp_check_link_status() Removed a call to intel_dp_get_link_status() (Ander) v3: Changed commit message to explain need of link status being read before performing encoder checks (Daniel) v4: Changed commit message to explain need of reading link status on short pulse (Ander) Tested-by: Nathan D Ciobanu Signed-off-by: Sivakumar Thulasimani Signed-off-by: Shubhangi Shrivastava Reviewed-by: Ander Conselvan de Oliveira [anderco: fix parenthesis alignment] Signed-off-by: Ander Conselvan de Oliveira Link: http://patchwork.freedesktop.org/patch/msgid/1459341326-13142-3-git-send-email-shubhangi.shrivastava@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 01b9f181727c..9ee7a739a67f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4215,6 +4215,36 @@ go_again: return -EINVAL; } +static void +intel_dp_check_link_status(struct intel_dp *intel_dp) +{ + struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; + struct drm_device *dev = intel_dp_to_dev(intel_dp); + u8 link_status[DP_LINK_STATUS_SIZE]; + + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); + + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("Failed to get link status\n"); + return; + } + + if (!intel_encoder->base.crtc) + return; + + if (!to_intel_crtc(intel_encoder->base.crtc)->active) + return; + + /* if link training is requested we should perform it always */ + if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) || + (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) { + DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", + intel_encoder->base.name); + intel_dp_start_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); + } +} + /* * According to DP spec * 5.1.2: @@ -4224,14 +4254,10 @@ go_again: * 4. Check link status on receipt of hot-plug interrupt */ static void -intel_dp_check_link_status(struct intel_dp *intel_dp) +intel_dp_short_pulse(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); - struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; u8 sink_irq_vector; - u8 link_status[DP_LINK_STATUS_SIZE]; - - WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); /* * Clearing compliance test variables to allow capturing @@ -4241,17 +4267,6 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) intel_dp->compliance_test_type = 0; intel_dp->compliance_test_data = 0; - if (!intel_encoder->base.crtc) - return; - - if (!to_intel_crtc(intel_encoder->base.crtc)->active) - return; - - /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp, link_status)) { - return; - } - /* Now read the DPCD to see if it's actually running */ if (!intel_dp_get_dpcd(intel_dp)) { return; @@ -4271,14 +4286,9 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } - /* if link training is requested we should perform it always */ - if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) || - (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) { - DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", - intel_encoder->base.name); - intel_dp_start_link_train(intel_dp); - intel_dp_stop_link_train(intel_dp); - } + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + intel_dp_check_link_status(intel_dp); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } /* XXX this is probably wrong for multiple downstream ports */ @@ -5017,11 +5027,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) } } - if (!intel_dp->is_mst) { - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - intel_dp_check_link_status(intel_dp); - drm_modeset_unlock(&dev->mode_config.connection_mutex); - } + if (!intel_dp->is_mst) + intel_dp_short_pulse(intel_dp); } ret = IRQ_HANDLED;