From: Thierry Reding Date: Thu, 23 Jun 2016 10:04:24 +0000 (+0200) Subject: dt-bindings: display: tegra: Add source clock for SOR X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5d2304c1de6b353a0e09f4ed22165835f5651e4b;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: display: tegra: Add source clock for SOR The SOR clock can have various sources, with the most commonly used being the sor_safe, pll_d2_out0, pll_dp and sor_brick clocks. These are configured using a three level mux, of which the first 2 levels can be treated as one. The direct parents of the SOR clock are the sor_safe, sor_brick and sor_src clocks, whereas the pll_d2_out0 and pll_dp clocks can be selected as parents of the sor_src clock via a second mux. Previous generations of Tegra have only supported eDP and LVDS with the SOR, where LVDS was never used on publicly available hardware. Clocking for this only ever required the first level mux (to select between sor_safe and sor_brick). Tegra210 has a new revision of the SOR that supports HDMI and hence needs to support the second level mux to allow selecting pll_d2_out0 as the SOR clock's parent. This second mux is knows as sor_src, and operating system software needs a reference to it in order to select the proper parent. Signed-off-by: Thierry Reding --- diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index d0f1dc62550a..0fad7ed2ea19 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -208,6 +208,7 @@ of the following host1x client modules: See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - sor: clock input for the SOR hardware + - source: source clock for the SOR clock - parent: input for the pixel clock - dp: reference clock for the SOR clock - safe: safe reference for the SOR clock during power up