From: Ansuel Smith Date: Mon, 1 Mar 2021 00:11:16 +0000 (+0100) Subject: ipq806x: introduce dedicated krait cpufreq X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5dbbefcbccc06cbcc8da0706afba52f741781d47;p=openwrt%2Fstaging%2Flinusw.git ipq806x: introduce dedicated krait cpufreq - Drop cpufreq patchs that tweak the cpufreq-dt driver - Add dedicated krait cpufreq driver Signed-off-by: Ansuel Smith --- diff --git a/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch deleted file mode 100644 index 9efbd583b4..0000000000 --- a/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch +++ /dev/null @@ -1,153 +0,0 @@ -From: Sylwester Nawrocki -To: krzk@kernel.org, vireshk@kernel.org, robh+dt@kernel.org -Cc: sboyd@kernel.org, roger.lu@mediatek.com, - linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, - linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, - b.zolnierkie@samsung.com, m.szyprowski@samsung.com, - Stephen Boyd , - Sylwester Nawrocki -Subject: [PATCH v5 1/4] PM / OPP: Support adjusting OPP voltages at runtime -Date: Wed, 16 Oct 2019 16:57:53 +0200 -Message-ID: <20191016145756.16004-2-s.nawrocki@samsung.com> (raw) -In-Reply-To: <20191016145756.16004-1-s.nawrocki@samsung.com> - -From: Stephen Boyd - -On some SoCs the Adaptive Voltage Scaling (AVS) technique is -employed to optimize the operating voltage of a device. At a -given frequency, the hardware monitors dynamic factors and either -makes a suggestion for how much to adjust a voltage for the -current frequency, or it automatically adjusts the voltage -without software intervention. Add an API to the OPP library for -the former case, so that AVS type devices can update the voltages -for an OPP when the hardware determines the voltage should -change. The assumption is that drivers like CPUfreq or devfreq -will register for the OPP notifiers and adjust the voltage -according to suggestions that AVS makes. - -This patch is derived from [1] submitted by Stephen. -[1] https://lore.kernel.org/patchwork/patch/599279/ - -Signed-off-by: Stephen Boyd -Signed-off-by: Roger Lu -[s.nawrocki@samsung.com: added handling of OPP min/max voltage] -Signed-off-by: Sylwester Nawrocki ---- - drivers/opp/core.c | 69 ++++++++++++++++++++++++++++++++++++++++++ - include/linux/pm_opp.h | 13 ++++++++ - 2 files changed, 82 insertions(+) - ---- a/drivers/opp/core.c -+++ b/drivers/opp/core.c -@@ -2102,6 +2102,75 @@ put_table: - } - - /** -+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP -+ * @dev: device for which we do this operation -+ * @freq: OPP frequency to adjust voltage of -+ * @u_volt: new OPP target voltage -+ * @u_volt_min: new OPP min voltage -+ * @u_volt_max: new OPP max voltage -+ * -+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the -+ * copy operation, returns 0 if no modifcation was done OR modification was -+ * successful. -+ */ -+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt, unsigned long u_volt_min, -+ unsigned long u_volt_max) -+ -+{ -+ struct opp_table *opp_table; -+ struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); -+ int r = 0; -+ -+ /* Find the opp_table */ -+ opp_table = _find_opp_table(dev); -+ if (IS_ERR(opp_table)) { -+ r = PTR_ERR(opp_table); -+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); -+ return r; -+ } -+ -+ mutex_lock(&opp_table->lock); -+ -+ /* Do we have the frequency? */ -+ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { -+ if (tmp_opp->rate == freq) { -+ opp = tmp_opp; -+ break; -+ } -+ } -+ -+ if (IS_ERR(opp)) { -+ r = PTR_ERR(opp); -+ goto adjust_unlock; -+ } -+ -+ /* Is update really needed? */ -+ if (opp->supplies->u_volt == u_volt) -+ goto adjust_unlock; -+ -+ opp->supplies->u_volt = u_volt; -+ opp->supplies->u_volt_min = u_volt_min; -+ opp->supplies->u_volt_max = u_volt_max; -+ -+ dev_pm_opp_get(opp); -+ mutex_unlock(&opp_table->lock); -+ -+ /* Notify the voltage change of the OPP */ -+ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, -+ opp); -+ -+ dev_pm_opp_put(opp); -+ goto adjust_put_table; -+ -+adjust_unlock: -+ mutex_unlock(&opp_table->lock); -+adjust_put_table: -+ dev_pm_opp_put_opp_table(opp_table); -+ return r; -+} -+ -+/** - * dev_pm_opp_enable() - Enable a specific OPP - * @dev: device for which we do this operation - * @freq: OPP frequency to enable ---- a/include/linux/pm_opp.h -+++ b/include/linux/pm_opp.h -@@ -22,6 +22,7 @@ struct opp_table; - - enum dev_pm_opp_event { - OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, -+ OPP_EVENT_ADJUST_VOLTAGE, - }; - - /** -@@ -113,6 +114,10 @@ int dev_pm_opp_add(struct device *dev, u - void dev_pm_opp_remove(struct device *dev, unsigned long freq); - void dev_pm_opp_remove_all_dynamic(struct device *dev); - -+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt, unsigned long u_volt_min, -+ unsigned long u_volt_max); -+ - int dev_pm_opp_enable(struct device *dev, unsigned long freq); - - int dev_pm_opp_disable(struct device *dev, unsigned long freq); -@@ -242,6 +247,14 @@ static inline void dev_pm_opp_remove_all - { - } - -+static inline int -+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt, unsigned long u_volt_min, -+ unsigned long u_volt_max) -+{ -+ return 0; -+} -+ - static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) - { - return 0; diff --git a/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch deleted file mode 100644 index 35fe45fca7..0000000000 --- a/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch +++ /dev/null @@ -1,52 +0,0 @@ -From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Thu, 12 May 2016 14:41:33 +0300 -Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for - device - -Signed-off-by: Georgi Djakov ---- - drivers/opp/core.c | 21 +++++++++++++++++++++ - include/linux/pm_opp.h | 1 + - 2 files changed, 22 insertions(+) - ---- a/drivers/opp/core.c -+++ b/drivers/opp/core.c -@@ -127,6 +127,27 @@ unsigned long dev_pm_opp_get_freq(struct - } - EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); - -+struct regulator *dev_pm_opp_get_regulator(struct device *dev) -+{ -+ struct opp_table *opp_table; -+ struct regulator *reg; -+ -+ rcu_read_lock(); -+ -+ opp_table = _find_opp_table(dev); -+ if (IS_ERR(opp_table)) { -+ rcu_read_unlock(); -+ return ERR_CAST(opp_table); -+ } -+ -+ reg = opp_table->regulators[0]; -+ -+ rcu_read_unlock(); -+ -+ return reg; -+} -+EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator); -+ - /** - * dev_pm_opp_get_level() - Gets the level corresponding to an available opp - * @opp: opp for which level value has to be returned for ---- a/include/linux/pm_opp.h -+++ b/include/linux/pm_opp.h -@@ -83,6 +83,7 @@ void dev_pm_opp_put_opp_table(struct opp - unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); - - unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); -+struct regulator *dev_pm_opp_get_regulator(struct device *dev); - - unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp); - diff --git a/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch deleted file mode 100644 index 8498a0b6df..0000000000 --- a/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Thu, 25 Aug 2016 18:43:35 +0300 -Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting - the OPP - -When the voltage is adjusted, the voltage tolerance is not updated. -This can lead to situations where the voltage min value is greater -than the voltage max value. The final result is triggering a BUG() -in the regulator core. -Fix this by updating the voltage tolerance values too. - -Signed-off-by: Georgi Djakov ---- - drivers/opp/core.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/opp/core.c -+++ b/drivers/opp/core.c -@@ -2142,6 +2142,7 @@ int dev_pm_opp_adjust_voltage(struct dev - struct opp_table *opp_table; - struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); - int r = 0; -+ unsigned long tol; - - /* Find the opp_table */ - opp_table = _find_opp_table(dev); -@@ -2171,8 +2172,17 @@ int dev_pm_opp_adjust_voltage(struct dev - goto adjust_unlock; - - opp->supplies->u_volt = u_volt; -- opp->supplies->u_volt_min = u_volt_min; -- opp->supplies->u_volt_max = u_volt_max; -+ -+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100; -+ if ( u_volt_min == u_volt ) -+ opp->supplies->u_volt_min = u_volt - tol; -+ else -+ opp->supplies->u_volt_min = u_volt_min; -+ -+ if ( u_volt_max == u_volt ) -+ opp->supplies->u_volt_max = u_volt + tol; -+ else -+ opp->supplies->u_volt_max = u_volt_max; - - dev_pm_opp_get(opp); - mutex_unlock(&opp_table->lock); diff --git a/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch deleted file mode 100644 index 2e9c101d94..0000000000 --- a/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001 -From: Stephen Boyd -Date: Fri, 18 Sep 2015 17:52:08 -0700 -Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events - -On some SoCs the Adaptive Voltage Scaling (AVS) technique is -employed to optimize the operating voltage of a device. At a -given frequency, the hardware monitors dynamic factors and either -makes a suggestion for how much to adjust a voltage for the -current frequency, or it automatically adjusts the voltage -without software intervention. - -In the former case, an AVS driver will call -dev_pm_opp_modify_voltage() and update the voltage for the -particular OPP the CPUs are using. Add an OPP notifier to -cpufreq-dt so that we can adjust the voltage of the CPU when AVS -updates the OPP. - -Signed-off-by: Stephen Boyd -Acked-by: Viresh Kumar -Signed-off-by: Georgi Djakov ---- - drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 65 insertions(+), 3 deletions(-) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -27,6 +27,9 @@ struct private_data { - struct opp_table *opp_table; - struct device *cpu_dev; - const char *reg_name; -+ struct notifier_block opp_nb; -+ struct mutex lock; -+ unsigned long opp_freq; - bool have_static_opps; - }; - -@@ -42,12 +45,15 @@ static int set_target(struct cpufreq_pol - unsigned long freq = policy->freq_table[index].frequency; - int ret; - -+ mutex_lock(&priv->lock); - ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); - - if (!ret) { -+ priv->opp_freq = freq * 1000; - arch_set_freq_scale(policy->related_cpus, freq, - policy->cpuinfo.max_freq); - } -+ mutex_unlock(&priv->lock); - - return ret; - } -@@ -90,6 +96,39 @@ node_put: - return name; - } - -+static int opp_notifier(struct notifier_block *nb, unsigned long event, -+ void *data) -+{ -+ struct dev_pm_opp *opp = data; -+ struct private_data *priv = container_of(nb, struct private_data, -+ opp_nb); -+ struct device *cpu_dev = priv->cpu_dev; -+ struct regulator *cpu_reg; -+ unsigned long volt, freq; -+ int ret = 0; -+ -+ if (event == OPP_EVENT_ADJUST_VOLTAGE) { -+ cpu_reg = dev_pm_opp_get_regulator(cpu_dev); -+ if (IS_ERR(cpu_reg)) { -+ ret = PTR_ERR(cpu_reg); -+ goto out; -+ } -+ volt = dev_pm_opp_get_voltage(opp); -+ freq = dev_pm_opp_get_freq(opp); -+ -+ mutex_lock(&priv->lock); -+ if (freq == priv->opp_freq) { -+ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt); -+ } -+ mutex_unlock(&priv->lock); -+ if (ret) -+ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret); -+ } -+ -+out: -+ return notifier_from_errno(ret); -+} -+ - static int resources_available(void) - { - struct device *cpu_dev; -@@ -246,10 +285,14 @@ static int cpufreq_init(struct cpufreq_p - __func__, ret); - } - -+ mutex_init(&priv->lock); -+ priv->opp_nb.notifier_call = opp_notifier; -+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb); -+ - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); - if (ret) { - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); -- goto out_free_opp; -+ goto out_unregister_nb; - } - - priv->cpu_dev = cpu_dev; -@@ -281,6 +324,8 @@ static int cpufreq_init(struct cpufreq_p - - out_free_cpufreq_table: - dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); -+out_unregister_nb: -+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb); - out_free_opp: - if (priv->have_static_opps) - dev_pm_opp_of_cpumask_remove_table(policy->cpus); diff --git a/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch deleted file mode 100644 index 910c2b1722..0000000000 --- a/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch +++ /dev/null @@ -1,199 +0,0 @@ ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -39,20 +39,85 @@ static struct freq_attr *cpufreq_dt_attr - NULL, - }; - -+struct shared_data { -+ unsigned long *curr_freq_table; -+ unsigned long curr_l2_freq; -+ unsigned long curr_l2_volt; -+}; -+ -+static struct shared_data *cpus_shared_data; -+ - static int set_target(struct cpufreq_policy *policy, unsigned int index) - { - struct private_data *priv = policy->driver_data; - unsigned long freq = policy->freq_table[index].frequency; -+ struct clk *l2_clk = policy->l2_clk; -+ struct regulator *l2_regulator = policy->l2_regulator; -+ unsigned long l2_freq, target_l2_freq; -+ unsigned long l2_vol, target_l2_volt; -+ unsigned long target_freq; - int ret; - - mutex_lock(&priv->lock); - ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); - - if (!ret) { -+ if (policy->l2_rate_set) { -+ int cpu, l2_index, tol = 0; -+ target_freq = freq * 1000; -+ -+ cpus_shared_data->curr_freq_table[policy->cpu] = target_freq; -+ for_each_present_cpu(cpu) -+ if (cpu != policy->cpu) -+ target_freq = max(target_freq, cpus_shared_data->curr_freq_table[cpu]); -+ -+ for (l2_index = 2; l2_index > 0; l2_index--) -+ if (target_freq >= policy->l2_cpufreq[l2_index]) -+ break; -+ -+ l2_freq = cpus_shared_data->curr_l2_freq; -+ target_l2_freq = policy->l2_rate[l2_index]; -+ -+ if (l2_freq != target_l2_freq) { -+ -+ /* -+ * Set to idle bin if switching from normal to high bin -+ * or vice versa -+ */ -+ if ( (l2_index == 2 && l2_freq == policy->l2_rate[1]) || -+ (l2_index == 1 && l2_freq == policy->l2_rate[2]) ) { -+ ret = clk_set_rate(l2_clk, policy->l2_rate[0]); -+ if (ret) -+ goto exit; -+ } -+ -+ /* scale l2 with the core */ -+ ret = clk_set_rate(l2_clk, target_l2_freq); -+ if (ret) -+ goto exit; -+ cpus_shared_data->curr_l2_freq = target_l2_freq; -+ -+ if (policy->l2_volt_set) { -+ -+ l2_vol = cpus_shared_data->curr_l2_volt; -+ target_l2_volt = policy->l2_volt[l2_index]; -+ -+ if (l2_vol != target_l2_volt) { -+ tol = target_l2_volt * policy->l2_volt_tol / 100; -+ ret = regulator_set_voltage_tol(l2_regulator,target_l2_volt,tol); -+ if (ret) -+ goto exit; -+ cpus_shared_data->curr_l2_volt = target_l2_volt; -+ } -+ } -+ } -+ } - priv->opp_freq = freq * 1000; - arch_set_freq_scale(policy->related_cpus, freq, - policy->cpuinfo.max_freq); - } -+ -+exit: - mutex_unlock(&priv->lock); - - return ret; -@@ -195,6 +260,9 @@ static int cpufreq_init(struct cpufreq_p - bool fallback = false; - const char *name; - int ret; -+ struct device_node *np, *l2_np; -+ struct clk *l2_clk = NULL; -+ struct regulator *l2_regulator = NULL; - - cpu_dev = get_cpu_device(policy->cpu); - if (!cpu_dev) { -@@ -302,6 +370,57 @@ static int cpufreq_init(struct cpufreq_p - - policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; - -+ policy->l2_rate_set = false; -+ policy->l2_volt_set = false; -+ -+ l2_clk = clk_get(cpu_dev, "l2"); -+ if (!IS_ERR(l2_clk)) -+ policy->l2_clk = l2_clk; -+ -+ l2_np = of_find_node_by_name(NULL, "qcom,l2"); -+ if (l2_np) { -+ struct device_node *vdd; -+ np = of_node_get(priv->cpu_dev->of_node); -+ -+ if (np) -+ of_property_read_u32(np, "voltage-tolerance", &policy->l2_volt_tol); -+ -+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3); -+ if (policy->l2_rate[0] && policy->l2_rate[1] && policy->l2_rate[2]) { -+ policy->l2_rate_set = true; -+ of_property_read_u32_array(l2_np, "qcom,l2-cpufreq", policy->l2_cpufreq, 3); -+ of_property_read_u32_array(l2_np, "qcom,l2-volt", policy->l2_volt, 3); -+ } else -+ pr_warn("L2: failed to parse L2 rates\n"); -+ -+ if (!policy->l2_cpufreq[0] && !policy->l2_cpufreq[1] && -+ !policy->l2_cpufreq[2] && policy->l2_rate_set) { -+ int i; -+ -+ pr_warn("L2: failed to parse target cpu freq, using defaults\n"); -+ for (i = 0; i < 3; i++) -+ policy->l2_cpufreq[i] = policy->l2_rate[i]; -+ } -+ -+ if (policy->l2_volt[0] && policy->l2_volt[1] && policy->l2_volt[2] && -+ policy->l2_volt_tol && policy->l2_rate_set) { -+ vdd = of_parse_phandle(l2_np, "qcom,l2-supply", 0); -+ -+ if (vdd) { -+ l2_regulator = devm_regulator_get(cpu_dev, vdd->name); -+ if (!IS_ERR(l2_regulator)) { -+ policy->l2_regulator = l2_regulator; -+ policy->l2_volt_set = true; -+ } else { -+ pr_warn("failed to get l2 supply\n"); -+ l2_regulator = NULL; -+ } -+ -+ of_node_put(vdd); -+ } -+ } -+ } -+ - /* Support turbo/boost mode */ - if (policy_has_boost_freq(policy)) { - /* This gets disabled by core on driver unregister */ -@@ -401,6 +520,14 @@ static int dt_cpufreq_probe(struct platf - if (ret) - return ret; - -+ cpus_shared_data = kzalloc(sizeof(struct shared_data), GFP_KERNEL); -+ if (!cpus_shared_data) -+ return -ENOMEM; -+ -+ cpus_shared_data->curr_freq_table = kzalloc(sizeof(int) * CONFIG_NR_CPUS, GFP_KERNEL); -+ if (!cpus_shared_data->curr_freq_table) -+ return -ENOMEM; -+ - if (data) { - if (data->have_governor_per_policy) - dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; -@@ -419,6 +546,8 @@ static int dt_cpufreq_probe(struct platf - - static int dt_cpufreq_remove(struct platform_device *pdev) - { -+ kfree(cpus_shared_data->curr_freq_table); -+ kfree(cpus_shared_data); - cpufreq_unregister_driver(&dt_cpufreq_driver); - return 0; - } ---- a/include/linux/cpufreq.h -+++ b/include/linux/cpufreq.h -@@ -58,7 +58,15 @@ struct cpufreq_policy { - should set cpufreq */ - unsigned int cpu; /* cpu managing this policy, must be online */ - -- struct clk *clk; -+ struct clk *clk; -+ struct clk *l2_clk; /* L2 clock */ -+ struct regulator *l2_regulator; /* L2 supply */ -+ unsigned int l2_rate[3]; /* L2 bus clock rate */ -+ bool l2_rate_set; -+ unsigned int l2_cpufreq[3]; /* L2 target CPU frequency */ -+ unsigned int l2_volt[3]; /* L2 voltage array */ -+ bool l2_volt_set; -+ unsigned int l2_volt_tol; /* L2 voltage tolerance */ - struct cpufreq_cpuinfo cpuinfo;/* see above */ - - unsigned int min; /* in kHz */ diff --git a/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch deleted file mode 100644 index 9b85839e19..0000000000 --- a/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Tue, 17 May 2016 16:15:43 +0300 -Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks - -Signed-off-by: Georgi Djakov ---- - drivers/cpufreq/cpufreq-dt.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -178,8 +178,10 @@ static int opp_notifier(struct notifier_ - ret = PTR_ERR(cpu_reg); - goto out; - } -+ rcu_read_lock(); - volt = dev_pm_opp_get_voltage(opp); - freq = dev_pm_opp_get_freq(opp); -+ rcu_read_unlock(); - - mutex_lock(&priv->lock); - if (freq == priv->opp_freq) { diff --git a/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch deleted file mode 100644 index 441500df79..0000000000 --- a/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch +++ /dev/null @@ -1,243 +0,0 @@ ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k - clk-qcom-y += clk-hfpll.o - clk-qcom-y += reset.o - clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o -+clk-qcom-y += fab_scaling.o - - # Keep alphabetically sorted by config - obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o ---- /dev/null -+++ b/drivers/clk/qcom/fab_scaling.c -@@ -0,0 +1,172 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct qcom_fab_scaling_data { -+ u32 fab_freq_high; -+ u32 fab_freq_nominal; -+ u32 cpu_freq_threshold; -+ struct clk *apps_fab_clk; -+ struct clk *ddr_fab_clk; -+}; -+ -+static struct qcom_fab_scaling_data *drv_data; -+ -+int scale_fabrics(unsigned long max_cpu_freq) -+{ -+ struct clk *apps_fab_clk = drv_data->apps_fab_clk, -+ *ddr_fab_clk = drv_data->ddr_fab_clk; -+ unsigned long target_freq, cur_freq; -+ int ret; -+ -+ /* Skip fab scaling if the driver is not ready */ -+ if (!apps_fab_clk || !ddr_fab_clk) -+ return 0; -+ -+ if (max_cpu_freq > drv_data->cpu_freq_threshold) -+ target_freq = drv_data->fab_freq_high; -+ else -+ target_freq = drv_data->fab_freq_nominal; -+ -+ cur_freq = clk_get_rate(ddr_fab_clk); -+ -+ if (target_freq != cur_freq) { -+ ret = clk_set_rate(apps_fab_clk, target_freq); -+ if (ret) -+ return ret; -+ ret = clk_set_rate(ddr_fab_clk, target_freq); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(scale_fabrics); -+ -+static int ipq806x_fab_scaling_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct clk *apps_fab_clk, *ddr_fab_clk; -+ int ret; -+ -+ if (!np) -+ return -ENODEV; -+ -+ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); -+ if (!drv_data) -+ return -ENOMEM; -+ -+ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) { -+ pr_err("FABRICS turbo freq not found. Using defaults...\n"); -+ drv_data->fab_freq_high = 533000000; -+ } -+ -+ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) { -+ pr_err("FABRICS nominal freq not found. Using defaults...\n"); -+ drv_data->fab_freq_nominal = 400000000; -+ } -+ -+ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) { -+ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n"); -+ drv_data->cpu_freq_threshold = 1000000000; -+ } -+ -+ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk"); -+ ret = PTR_ERR_OR_ZERO(apps_fab_clk); -+ if (ret) { -+ /* -+ * If apps fab clk node is present, but clock is not yet -+ * registered, we should try defering probe. -+ */ -+ if (ret != -EPROBE_DEFER) { -+ pr_err("Failed to get APPS FABRIC clock: %d\n", ret); -+ ret = -ENODEV; -+ } -+ goto err; -+ } -+ -+ clk_prepare_enable(apps_fab_clk); -+ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high); -+ drv_data->apps_fab_clk = apps_fab_clk; -+ -+ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk"); -+ ret = PTR_ERR_OR_ZERO(ddr_fab_clk); -+ if (ret) { -+ /* -+ * If ddr fab clk node is present, but clock is not yet -+ * registered, we should try defering probe. -+ */ -+ if (ret != -EPROBE_DEFER) { -+ pr_err("Failed to get DDR FABRIC clock: %d\n", ret); -+ ddr_fab_clk = NULL; -+ ret = -ENODEV; -+ } -+ goto err; -+ } -+ -+ clk_prepare_enable(ddr_fab_clk); -+ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high); -+ drv_data->ddr_fab_clk = ddr_fab_clk; -+ -+ return 0; -+err: -+ kfree(drv_data); -+ return ret; -+} -+ -+static int ipq806x_fab_scaling_remove(struct platform_device *pdev) -+{ -+ kfree(drv_data); -+ return 0; -+} -+ -+static const struct of_device_id fab_scaling_ipq806x_match_table[] = { -+ { .compatible = "qcom,fab-scaling" }, -+ { } -+}; -+ -+static struct platform_driver fab_scaling_ipq806x_driver = { -+ .probe = ipq806x_fab_scaling_probe, -+ .remove = ipq806x_fab_scaling_remove, -+ .driver = { -+ .name = "fab-scaling", -+ .of_match_table = fab_scaling_ipq806x_match_table, -+ }, -+}; -+ -+static int __init fab_scaling_ipq806x_init(void) -+{ -+ return platform_driver_register(&fab_scaling_ipq806x_driver); -+} -+late_initcall(fab_scaling_ipq806x_init); -+ -+static void __exit fab_scaling_ipq806x_exit(void) -+{ -+ platform_driver_unregister(&fab_scaling_ipq806x_driver); -+} -+module_exit(fab_scaling_ipq806x_exit); ---- /dev/null -+++ b/include/linux/fab_scaling.h -@@ -0,0 +1,31 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+ -+#ifndef __FAB_SCALING_H -+#define __FAB_SCALING_H -+ -+/** -+ * scale_fabrics - Scale DDR and APPS FABRICS -+ * -+ * This function monitors all the registered clocks and does APPS -+ * and DDR FABRIC scaling based on the idle frequencies with which -+ * it was registered. -+ * -+ */ -+int scale_fabrics(unsigned long max_cpu_freq); -+ -+#endif ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - - #include "cpufreq-dt.h" - -@@ -111,6 +112,13 @@ static int set_target(struct cpufreq_pol - } - } - } -+ -+ /* -+ * Scale fabrics with max freq across all cores -+ */ -+ ret = scale_fabrics(target_freq); -+ if (ret) -+ goto exit; - } - priv->opp_freq = freq * 1000; - arch_set_freq_scale(policy->related_cpus, freq, diff --git a/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch b/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch new file mode 100644 index 0000000000..afc9287118 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch @@ -0,0 +1,56 @@ +From a206d4061f1cc2c5cd17ee45c53a0ba711e48e6d Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 7 Feb 2021 16:42:52 +0100 +Subject: [PATCH 3/3] drivers: cpufreq: qcom-cpufreq-nvmem: support specific + cpufreq driver + +Add support for specific cpufreq driver for qcom-cpufreq-nvmem driver. + +Signed-off-by: Ansuel Smith +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c +index d1744b5d9619..4866c74ead0f 100644 +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -52,6 +52,7 @@ struct qcom_cpufreq_match_data { + char **pvs_name, + struct qcom_cpufreq_drv *drv); + const char **genpd_names; ++ const char *cpufreq_driver; + }; + + struct qcom_cpufreq_drv { +@@ -250,6 +251,7 @@ static const struct qcom_cpufreq_match_data match_data_kryo = { + + static const struct qcom_cpufreq_match_data match_data_krait = { + .get_version = qcom_cpufreq_krait_name_version, ++ .cpufreq_driver = "krait-cpufreq", + }; + + static const char *qcs404_genpd_names[] = { "cpr", NULL }; +@@ -385,6 +387,19 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) + } + } + ++ if (drv->data->cpufreq_driver) { ++ cpufreq_dt_pdev = platform_device_register_simple( ++ drv->data->cpufreq_driver, -1, NULL, 0); ++ if (!IS_ERR(cpufreq_dt_pdev)) { ++ platform_set_drvdata(pdev, drv); ++ return 0; ++ } else { ++ dev_err(cpu_dev, ++ "Failed to register dedicated %s cpufreq\n", ++ drv->data->cpufreq_driver); ++ } ++ } ++ + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { +-- +2.29.2 + diff --git a/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch b/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch new file mode 100644 index 0000000000..42913a994c --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch @@ -0,0 +1,679 @@ +From cc41a266280cad0b55319e614167c88dff344248 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sat, 22 Feb 2020 16:33:10 +0100 +Subject: [PATCH 1/8] cpufreq: add Krait dedicated scaling driver + +This new driver is based on generic cpufreq-dt driver. +Krait SoCs have 2-4 cpu and one shared L2 cache that can +operate at different frequency based on the maximum cpu clk +across all core. +L2 frequency and voltage are scaled on every frequency change +if needed. On Krait SoCs is present a bug that can cause +transition problem between frequency bin, to workaround this +on more than one transition, the L2 frequency is first set to the +base rate and then to the target rate. +The L2 frequency use the OPP framework and use the opp-level +bindings to link the l2 freq to different cpu freq. This is needed +as the Krait l2 clk are note mapped 1:1 to the core clks and some +of the l2 clk is set based on a range of the cpu clks. If the driver +find a broken config (for example no opp-level set) the l2 scaling is +skipped. + +Signed-off-by: Ansuel Smith +--- + drivers/cpufreq/Kconfig.arm | 14 +- + drivers/cpufreq/Makefile | 2 + + drivers/cpufreq/qcom-cpufreq-krait.c | 589 +++++++++++++++++++++++++++ + 3 files changed, 604 insertions(+), 1 deletion(-) + create mode 100644 drivers/cpufreq/qcom-cpufreq-krait.c + +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -150,6 +150,18 @@ config ARM_QCOM_CPUFREQ_HW + The driver implements the cpufreq interface for this HW engine. + Say Y if you want to support CPUFreq HW. + ++config ARM_QCOM_CPUFREQ_KRAIT ++ tristate "CPU Frequency scaling support for Krait SoCs" ++ depends on ARCH_QCOM || COMPILE_TEST ++ select PM_OPP ++ select ARM_QCOM_CPUFREQ_NVMEM ++ help ++ This adds the CPUFreq driver for Qualcomm Krait SoC based boards. ++ This scale the cache clk and regulator based on the different cpu ++ clks when scaling the different cores clk. ++ ++ If in doubt, say N. ++ + config ARM_RASPBERRYPI_CPUFREQ + tristate "Raspberry Pi cpufreq support" + depends on CLK_RASPBERRYPI || COMPILE_TEST +@@ -339,4 +351,4 @@ config ARM_PXA2xx_CPUFREQ + help + This add the CPUFreq driver support for Intel PXA2xx SOCs. + +- If in doubt, say N. ++ If in doubt, say N. +\ No newline at end of file +--- a/drivers/cpufreq/Makefile ++++ b/drivers/cpufreq/Makefile +@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2 + obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o + obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o + obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o ++obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRAIT) += qcom-cpufreq-krait.o + obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o + obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o + obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o +@@ -86,6 +87,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += te + obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o + obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o + obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o ++obj-$(CONFIG_ARM_KRAIT_CPUFREQ) += krait-cpufreq.o + + + ################################################################################## +--- /dev/null ++++ b/drivers/cpufreq/qcom-cpufreq-krait.c +@@ -0,0 +1,601 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cpufreq-dt.h" ++ ++static struct platform_device *l2_pdev; ++ ++struct private_data { ++ struct opp_table *opp_table; ++ struct device *cpu_dev; ++ const char *reg_name; ++ bool have_static_opps; ++}; ++ ++static int set_target(struct cpufreq_policy *policy, unsigned int index) ++{ ++ struct private_data *priv = policy->driver_data; ++ unsigned long freq = policy->freq_table[index].frequency; ++ unsigned long target_freq = freq * 1000; ++ struct dev_pm_opp *opp; ++ unsigned int level; ++ int cpu, ret; ++ ++ if (l2_pdev) { ++ /* find the max freq across all core */ ++ for_each_present_cpu(cpu) ++ if (cpu != index) ++ target_freq = max( ++ target_freq, ++ (unsigned long)cpufreq_quick_get(cpu)); ++ ++ opp = dev_pm_opp_find_freq_exact(priv->cpu_dev, target_freq, ++ true); ++ if (IS_ERR(opp)) { ++ dev_err(&l2_pdev->dev, "failed to find OPP for %ld\n", ++ target_freq); ++ return PTR_ERR(opp); ++ } ++ level = dev_pm_opp_get_level(opp); ++ dev_pm_opp_put(opp); ++ ++ opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level); ++ if (IS_ERR(opp)) { ++ dev_err(&l2_pdev->dev, ++ "failed to find level OPP for %d\n", level); ++ return PTR_ERR(opp); ++ } ++ target_freq = dev_pm_opp_get_freq(opp); ++ dev_pm_opp_put(opp); ++ ++ ret = dev_pm_opp_set_rate(&l2_pdev->dev, target_freq); ++ if (ret) ++ return ret; ++ ++ /* ++ * Hardware constraint: ++ * Krait CPU cannot operate at 384MHz with L2 at 1Ghz. ++ * Assume index 0 with the idle freq and level > 0 as ++ * any L2 freq > 384MHz. ++ * Skip CPU freq change in this corner case. ++ */ ++ if (unlikely(index == 0 && level != 0)) { ++ dev_err(priv->cpu_dev, "Krait CPU can't operate at idle freq with L2 at 1GHz"); ++ return -EINVAL; ++ } ++ } ++ ++ ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); ++ if (ret) ++ return ret; ++ ++ arch_set_freq_scale(policy->related_cpus, freq, ++ policy->cpuinfo.max_freq); ++ ++ return 0; ++} ++ ++/* ++ * An earlier version of opp-v1 bindings used to name the regulator ++ * "cpu0-supply", we still need to handle that for backwards compatibility. ++ */ ++static const char *find_supply_name(struct device *dev) ++{ ++ struct device_node *np; ++ struct property *pp; ++ int cpu = dev->id; ++ const char *name = NULL; ++ ++ np = of_node_get(dev->of_node); ++ ++ /* This must be valid for sure */ ++ if (WARN_ON(!np)) ++ return NULL; ++ ++ /* Try "cpu0" for older DTs */ ++ if (!cpu) { ++ pp = of_find_property(np, "cpu0-supply", NULL); ++ if (pp) { ++ name = "cpu0"; ++ goto node_put; ++ } ++ } ++ ++ pp = of_find_property(np, "cpu-supply", NULL); ++ if (pp) { ++ name = "cpu"; ++ goto node_put; ++ } ++ ++ dev_dbg(dev, "no regulator for cpu%d\n", cpu); ++node_put: ++ of_node_put(np); ++ return name; ++} ++ ++static int resources_available(void) ++{ ++ struct device *cpu_dev; ++ struct regulator *cpu_reg; ++ struct clk *cpu_clk; ++ int ret = 0; ++ const char *name; ++ ++ cpu_dev = get_cpu_device(0); ++ if (!cpu_dev) { ++ pr_err("failed to get cpu0 device\n"); ++ return -ENODEV; ++ } ++ ++ cpu_clk = clk_get(cpu_dev, NULL); ++ ret = PTR_ERR_OR_ZERO(cpu_clk); ++ if (ret) { ++ /* ++ * If cpu's clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret == -EPROBE_DEFER) ++ dev_dbg(cpu_dev, "clock not ready, retry\n"); ++ else ++ dev_err(cpu_dev, "failed to get clock: %d\n", ret); ++ ++ return ret; ++ } ++ ++ clk_put(cpu_clk); ++ ++ name = find_supply_name(cpu_dev); ++ /* Platform doesn't require regulator */ ++ if (!name) ++ return 0; ++ ++ cpu_reg = regulator_get_optional(cpu_dev, name); ++ ret = PTR_ERR_OR_ZERO(cpu_reg); ++ if (ret) { ++ /* ++ * If cpu's regulator supply node is present, but regulator is ++ * not yet registered, we should try defering probe. ++ */ ++ if (ret == -EPROBE_DEFER) ++ dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n"); ++ else ++ dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret); ++ ++ return ret; ++ } ++ ++ regulator_put(cpu_reg); ++ return 0; ++} ++ ++static int cpufreq_init(struct cpufreq_policy *policy) ++{ ++ struct cpufreq_frequency_table *freq_table; ++ struct opp_table *opp_table = NULL; ++ unsigned int transition_latency; ++ struct private_data *priv; ++ struct device *cpu_dev; ++ bool fallback = false; ++ struct clk *cpu_clk; ++ const char *name; ++ int ret; ++ ++ cpu_dev = get_cpu_device(policy->cpu); ++ if (!cpu_dev) { ++ pr_err("failed to get cpu%d device\n", policy->cpu); ++ return -ENODEV; ++ } ++ ++ cpu_clk = clk_get(cpu_dev, NULL); ++ if (IS_ERR(cpu_clk)) { ++ ret = PTR_ERR(cpu_clk); ++ dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret); ++ return ret; ++ } ++ ++ /* Get OPP-sharing information from "operating-points-v2" bindings */ ++ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus); ++ if (ret) { ++ if (ret != -ENOENT) ++ goto out_put_clk; ++ ++ /* ++ * operating-points-v2 not supported, fallback to old method of ++ * finding shared-OPPs for backward compatibility if the ++ * platform hasn't set sharing CPUs. ++ */ ++ if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus)) ++ fallback = true; ++ } ++ ++ /* ++ * OPP layer will be taking care of regulators now, but it needs to know ++ * the name of the regulator first. ++ */ ++ name = find_supply_name(cpu_dev); ++ if (name) { ++ opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1); ++ if (IS_ERR(opp_table)) { ++ ret = PTR_ERR(opp_table); ++ dev_err(cpu_dev, ++ "Failed to set regulator for cpu%d: %d\n", ++ policy->cpu, ret); ++ goto out_put_clk; ++ } ++ } ++ ++ priv = kzalloc(sizeof(*priv), GFP_KERNEL); ++ if (!priv) { ++ ret = -ENOMEM; ++ goto out_put_regulator; ++ } ++ ++ priv->reg_name = name; ++ priv->opp_table = opp_table; ++ ++ /* ++ * Initialize OPP tables for all policy->cpus. They will be shared by ++ * all CPUs which have marked their CPUs shared with OPP bindings. ++ * ++ * For platforms not using operating-points-v2 bindings, we do this ++ * before updating policy->cpus. Otherwise, we will end up creating ++ * duplicate OPPs for policy->cpus. ++ * ++ * OPPs might be populated at runtime, don't check for error here ++ */ ++ if (!dev_pm_opp_of_cpumask_add_table(policy->cpus)) ++ priv->have_static_opps = true; ++ ++ /* ++ * But we need OPP table to function so if it is not there let's ++ * give platform code chance to provide it for us. ++ */ ++ ret = dev_pm_opp_get_opp_count(cpu_dev); ++ if (ret <= 0) { ++ dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); ++ ret = -EPROBE_DEFER; ++ goto out_free_opp; ++ } ++ ++ if (fallback) { ++ cpumask_setall(policy->cpus); ++ ++ /* ++ * OPP tables are initialized only for policy->cpu, do it for ++ * others as well. ++ */ ++ ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); ++ if (ret) ++ dev_err(cpu_dev, ++ "%s: failed to mark OPPs as shared: %d\n", ++ __func__, ret); ++ } ++ ++ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); ++ if (ret) { ++ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); ++ goto out_free_opp; ++ } ++ ++ priv->cpu_dev = cpu_dev; ++ ++ policy->driver_data = priv; ++ policy->clk = cpu_clk; ++ policy->freq_table = freq_table; ++ ++ policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; ++ ++ transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); ++ if (!transition_latency) ++ transition_latency = CPUFREQ_ETERNAL; ++ ++ policy->cpuinfo.transition_latency = transition_latency; ++ policy->dvfs_possible_from_any_cpu = true; ++ ++ dev_pm_opp_of_register_em(cpu_dev, policy->cpus); ++ ++ return 0; ++ ++out_free_opp: ++ if (priv->have_static_opps) ++ dev_pm_opp_of_cpumask_remove_table(policy->cpus); ++ kfree(priv); ++out_put_regulator: ++ if (name) ++ dev_pm_opp_put_regulators(opp_table); ++out_put_clk: ++ clk_put(cpu_clk); ++ ++ return ret; ++} ++ ++static int cpufreq_online(struct cpufreq_policy *policy) ++{ ++ /* We did light-weight tear down earlier, nothing to do here */ ++ return 0; ++} ++ ++static int cpufreq_offline(struct cpufreq_policy *policy) ++{ ++ /* ++ * Preserve policy->driver_data and don't free resources on light-weight ++ * tear down. ++ */ ++ return 0; ++} ++ ++static int cpufreq_exit(struct cpufreq_policy *policy) ++{ ++ struct private_data *priv = policy->driver_data; ++ ++ dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); ++ if (priv->have_static_opps) ++ dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); ++ if (priv->reg_name) ++ dev_pm_opp_put_regulators(priv->opp_table); ++ ++ clk_put(policy->clk); ++ kfree(priv); ++ ++ return 0; ++} ++ ++static struct cpufreq_driver krait_cpufreq_driver = { ++ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | ++ CPUFREQ_IS_COOLING_DEV, ++ .verify = cpufreq_generic_frequency_table_verify, ++ .target_index = set_target, ++ .get = cpufreq_generic_get, ++ .init = cpufreq_init, ++ .exit = cpufreq_exit, ++ .online = cpufreq_online, ++ .offline = cpufreq_offline, ++ .name = "krait-cpufreq", ++ .suspend = cpufreq_generic_suspend, ++}; ++ ++struct krait_data { ++ unsigned long idle_freq; ++ bool regulator_enabled; ++}; ++ ++static int krait_cache_set_opp(struct dev_pm_set_opp_data *data) ++{ ++ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; ++ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0]; ++ struct regulator *reg = data->regulators[0]; ++ struct clk *clk = data->clk; ++ struct krait_data *kdata; ++ unsigned long idle_freq; ++ int ret; ++ ++ kdata = (struct krait_data *)dev_get_drvdata(data->dev); ++ idle_freq = kdata->idle_freq; ++ ++ /* Scaling up? Scale voltage before frequency */ ++ if (freq >= old_freq) { ++ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, ++ supply->u_volt, ++ supply->u_volt_max); ++ if (ret) ++ goto exit; ++ } ++ ++ /* ++ * Set to idle bin if switching from normal to high bin ++ * or vice versa. It has been notice that a bug is triggered ++ * in cache scaling when more than one bin is scaled, to fix ++ * this we first need to transition to the base rate and then ++ * to target rate ++ */ ++ if (likely(freq != idle_freq && old_freq != idle_freq)) { ++ ret = clk_set_rate(clk, idle_freq); ++ if (ret) ++ goto exit; ++ } ++ ++ ret = clk_set_rate(clk, freq); ++ if (ret) ++ goto exit; ++ ++ /* Scaling down? Scale voltage after frequency */ ++ if (freq < old_freq) { ++ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, ++ supply->u_volt, ++ supply->u_volt_max); ++ } ++ ++ if (unlikely(!kdata->regulator_enabled)) { ++ ret = regulator_enable(reg); ++ if (ret < 0) ++ dev_warn(data->dev, "Failed to enable regulator: %d", ret); ++ else ++ kdata->regulator_enabled = true; ++ } ++ ++exit: ++ return ret; ++}; ++ ++static int krait_cache_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct krait_data *data; ++ struct opp_table *table; ++ struct dev_pm_opp *opp; ++ struct device *cpu_dev; ++ int ret; ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1); ++ if (IS_ERR(table)) { ++ ret = PTR_ERR(table); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "failed to set regulators %d\n", ret); ++ ++ return ret; ++ } ++ ++ ret = PTR_ERR_OR_ZERO( ++ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp)); ++ if (ret) ++ return ret; ++ ++ ret = dev_pm_opp_of_add_table(dev); ++ if (ret) { ++ dev_err(dev, "failed to parse L2 freq thresholds\n"); ++ return ret; ++ } ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq); ++ dev_pm_opp_put(opp); ++ ++ /* ++ * Check opp-level configuration ++ * At least 2 level must be set or the cache will always be scaled ++ * the idle freq causing some performance problem ++ * ++ * In case of invalid configuration, the l2 scaling is skipped ++ */ ++ cpu_dev = get_cpu_device(0); ++ if (!cpu_dev) { ++ pr_err("failed to get cpu0 device\n"); ++ return -ENODEV; ++ } ++ ++ /* ++ * Check if we have at least opp-level 1, 0 should always be set to ++ * the idle freq ++ */ ++ opp = dev_pm_opp_find_level_exact(dev, 1); ++ if (IS_ERR(opp)) { ++ dev_err(dev, ++ "Invalid configuration found of l2 opp. Can't find opp-level 1"); ++ goto invalid_conf; ++ } ++ dev_pm_opp_put(opp); ++ ++ /* ++ * Check if we have at least opp-level 1 in the cpu opp, 0 should always ++ * be set to the idle freq ++ */ ++ opp = dev_pm_opp_find_level_exact(cpu_dev, 1); ++ if (IS_ERR(opp)) { ++ dev_err(dev, ++ "Invalid configuration found of cpu opp. Can't find opp-level 1"); ++ goto invalid_conf; ++ } ++ dev_pm_opp_put(opp); ++ ++ platform_set_drvdata(pdev, data); ++ ++ /* The l2 scaling is enabled by linking the cpufreq driver */ ++ l2_pdev = pdev; ++ ++ return 0; ++ ++invalid_conf: ++ dev_pm_opp_remove_table(dev); ++ dev_pm_opp_put_regulators(table); ++ dev_pm_opp_unregister_set_opp_helper(table); ++ ++ return -EINVAL; ++}; ++ ++static int krait_cache_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct opp_table *table = dev_pm_opp_get_opp_table(dev); ++ ++ dev_pm_opp_remove_table(dev); ++ dev_pm_opp_put_regulators(table); ++ dev_pm_opp_unregister_set_opp_helper(table); ++ ++ return 0; ++}; ++ ++static const struct of_device_id krait_cache_match_table[] = { ++ { .compatible = "qcom,krait-cache" }, ++ {} ++}; ++ ++static struct platform_driver krait_cache_driver = { ++ .driver = { ++ .name = "krait-cache", ++ .of_match_table = krait_cache_match_table, ++ }, ++ .probe = krait_cache_probe, ++ .remove = krait_cache_remove, ++}; ++module_platform_driver(krait_cache_driver); ++ ++static int krait_cpufreq_probe(struct platform_device *pdev) ++{ ++ struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev); ++ int ret; ++ ++ /* ++ * All per-cluster (CPUs sharing clock/voltages) initialization is done ++ * from ->init(). In probe(), we just need to make sure that clk and ++ * regulators are available. Else defer probe and retry. ++ * ++ * FIXME: Is checking this only for CPU0 sufficient ? ++ */ ++ ret = resources_available(); ++ if (ret) ++ return ret; ++ ++ if (data) { ++ if (data->have_governor_per_policy) ++ krait_cpufreq_driver.flags |= ++ CPUFREQ_HAVE_GOVERNOR_PER_POLICY; ++ ++ krait_cpufreq_driver.resume = data->resume; ++ if (data->suspend) ++ krait_cpufreq_driver.suspend = data->suspend; ++ } ++ ++ ret = cpufreq_register_driver(&krait_cpufreq_driver); ++ if (ret) ++ dev_err(&pdev->dev, "failed register driver: %d\n", ret); ++ ++ return ret; ++} ++ ++static int krait_cpufreq_remove(struct platform_device *pdev) ++{ ++ cpufreq_unregister_driver(&krait_cpufreq_driver); ++ return 0; ++} ++ ++static struct platform_driver krait_cpufreq_platdrv = { ++ .driver = { ++ .name = "krait-cpufreq", ++ }, ++ .probe = krait_cpufreq_probe, ++ .remove = krait_cpufreq_remove, ++}; ++module_platform_driver(krait_cpufreq_platdrv); ++ ++MODULE_ALIAS("platform:krait-cpufreq"); ++MODULE_AUTHOR("Ansuel Smith "); ++MODULE_DESCRIPTION("Dedicated Krait SoC cpufreq driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch b/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch new file mode 100644 index 0000000000..81ec0883cd --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch @@ -0,0 +1,243 @@ +From c9ecd920324a647bf1f2b47f771c8f599cc7b551 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sat, 22 Feb 2020 18:02:17 +0100 +Subject: [PATCH 2/8] Documentation: cpufreq: add qcom,krait-cache bindings + +Document dedicated cpufreq for Krait CPUs. + +Signed-off-by: Ansuel Smith +--- + .../bindings/cpufreq/qcom-cpufreq-krait.yaml | 221 ++++++++++++++++++ + 1 file changed, 221 insertions(+) + create mode 100644 Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml + +diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml +new file mode 100644 +index 000000000000..f6bcca863d9a +--- /dev/null ++++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml +@@ -0,0 +1,221 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-krait.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: CPU Frequency scaling driver for Krait SoCs ++ ++maintainers: ++ - Ansuel Smith ++ ++description: | ++ The krait cpufreq driver is a dedicated frequency scaling driver ++ based on cpufreq-dt generic driver that scale L2 cache and the ++ cores. TEST ++ ++ The L2 cache is scaled based on the max clk across all cores and ++ the clock is decided based on the opp-level set in the device tree. ++ ++ Different core freq can be linked to a specific l2 freq and the driver ++ on frequency change will scale the core and the l2 clk based of the ++ linked freq. ++ ++ On Krait SoC is present a bug and on every L2 clk change the driver ++ needs to set the clk to the idle freq before changing it to the new value. ++ ++ This requires the qcom cpufreq nvmem driver to parse the different opp ++ core clk and an additional opp table for the l2 scaling. ++ ++ If the driver detect broken config (for example missing opp-level) the ++ cpufreq driver skips the l2 scaling ++ ++ Referring to this example opp-level can be used to link a range of cpu freq ++ to a specific l2 freq: ++ cpu opp freq 384000000 has opp-level 0 ++ l2 opp freq 384000000 has opp-level 0 ++ The driver will scale l2 to 384000000 ++ ++ cpu opp freq 600000000-1000000000 has opp-level 1 ++ l2 opp freq 1000000000 has opp-level 1 ++ The driver will scale l2 to 1000000000 ++ ++allOf: ++ - $ref: /schemas/cache-controller.yaml# ++ ++select: ++ properties: ++ compatible: ++ items: ++ - enum: ++ - qcom,krait-cache ++ ++ required: ++ - compatible ++ ++properties: ++ compatible: ++ items: ++ - const: qcom,krait-cache ++ - const: cache ++ ++ cache-level: ++ const: 2 ++ ++ clocks: ++ maxItems: 1 ++ ++ clock-names: ++ const: l2 ++ ++ l2-supply: true ++ ++ operating-points-v2: true ++ ++required: ++ - compatible ++ - cache-level ++ - clocks ++ - clock-names ++ - l2-supply ++ - operating-points-v2 ++ ++additionalProperties: false ++ ++examples: ++ - | ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ compatible = "qcom,krait"; ++ enable-method = "qcom,kpss-acc-v1"; ++ device_type = "cpu"; ++ reg = <0>; ++ next-level-cache = <&L2>; ++ qcom,acc = <&acc0>; ++ qcom,saw = <&saw0>; ++ clocks = <&kraitcc 0>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; ++ clock-latency = <100000>; ++ cpu-supply = <&smb208_s2a>; ++ operating-points-v2 = <&opp_table0>; ++ voltage-tolerance = <5>; ++ cooling-min-state = <0>; ++ cooling-max-state = <10>; ++ #cooling-cells = <2>; ++ cpu-idle-states = <&CPU_SPC>; ++ }; ++ ++ /* ... */ ++ ++ }; ++ ++ opp_table0: opp_table0 { ++ compatible = "operating-points-v2-kryo-cpu"; ++ nvmem-cells = <&speedbin_efuse>; ++ ++ opp-384000000 { ++ opp-hz = /bits/ 64 <384000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1000000>; ++ opp-microvolt-speed0-pvs1-v0 = <925000>; ++ opp-microvolt-speed0-pvs2-v0 = <875000>; ++ opp-microvolt-speed0-pvs3-v0 = <800000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <0>; ++ }; ++ ++ opp-600000000 { ++ opp-hz = /bits/ 64 <600000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1050000>; ++ opp-microvolt-speed0-pvs1-v0 = <975000>; ++ opp-microvolt-speed0-pvs2-v0 = <925000>; ++ opp-microvolt-speed0-pvs3-v0 = <850000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-800000000 { ++ opp-hz = /bits/ 64 <800000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1100000>; ++ opp-microvolt-speed0-pvs1-v0 = <1025000>; ++ opp-microvolt-speed0-pvs2-v0 = <995000>; ++ opp-microvolt-speed0-pvs3-v0 = <900000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-1000000000 { ++ opp-hz = /bits/ 64 <1000000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1150000>; ++ opp-microvolt-speed0-pvs1-v0 = <1075000>; ++ opp-microvolt-speed0-pvs2-v0 = <1025000>; ++ opp-microvolt-speed0-pvs3-v0 = <950000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-1200000000 { ++ opp-hz = /bits/ 64 <1200000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1200000>; ++ opp-microvolt-speed0-pvs1-v0 = <1125000>; ++ opp-microvolt-speed0-pvs2-v0 = <1075000>; ++ opp-microvolt-speed0-pvs3-v0 = <1000000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ ++ opp-1400000000 { ++ opp-hz = /bits/ 64 <1400000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1250000>; ++ opp-microvolt-speed0-pvs1-v0 = <1175000>; ++ opp-microvolt-speed0-pvs2-v0 = <1125000>; ++ opp-microvolt-speed0-pvs3-v0 = <1050000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ }; ++ ++ opp_table_l2: opp_table_l2 { ++ compatible = "operating-points-v2"; ++ ++ opp-384000000 { ++ opp-hz = /bits/ 64 <384000000>; ++ opp-microvolt = <1100000>; ++ clock-latency-ns = <100000>; ++ opp-level = <0>; ++ }; ++ opp-1000000000 { ++ opp-hz = /bits/ 64 <1000000000>; ++ opp-microvolt = <1100000>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ opp-1200000000 { ++ opp-hz = /bits/ 64 <1200000000>; ++ opp-microvolt = <1150000>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ }; ++ ++ soc { ++ L2: l2-cache { ++ compatible = "qcom,krait-cache", "cache"; ++ cache-level = <2>; ++ ++ clocks = <&kraitcc 4>; ++ clock-names = "l2"; ++ l2-supply = <&smb208_s1a>; ++ operating-points-v2 = <&opp_table_l2>; ++ }; ++ }; ++ ++... +-- +2.29.2 + diff --git a/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch new file mode 100644 index 0000000000..29dff3297d --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch @@ -0,0 +1,243 @@ +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k + clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o ++clk-qcom-y += fab_scaling.o + + # Keep alphabetically sorted by config + obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o +--- /dev/null ++++ b/drivers/clk/qcom/fab_scaling.c +@@ -0,0 +1,172 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct qcom_fab_scaling_data { ++ u32 fab_freq_high; ++ u32 fab_freq_nominal; ++ u32 cpu_freq_threshold; ++ struct clk *apps_fab_clk; ++ struct clk *ddr_fab_clk; ++}; ++ ++static struct qcom_fab_scaling_data *drv_data; ++ ++int scale_fabrics(unsigned long max_cpu_freq) ++{ ++ struct clk *apps_fab_clk = drv_data->apps_fab_clk, ++ *ddr_fab_clk = drv_data->ddr_fab_clk; ++ unsigned long target_freq, cur_freq; ++ int ret; ++ ++ /* Skip fab scaling if the driver is not ready */ ++ if (!apps_fab_clk || !ddr_fab_clk) ++ return 0; ++ ++ if (max_cpu_freq > drv_data->cpu_freq_threshold) ++ target_freq = drv_data->fab_freq_high; ++ else ++ target_freq = drv_data->fab_freq_nominal; ++ ++ cur_freq = clk_get_rate(ddr_fab_clk); ++ ++ if (target_freq != cur_freq) { ++ ret = clk_set_rate(apps_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ ret = clk_set_rate(ddr_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(scale_fabrics); ++ ++static int ipq806x_fab_scaling_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct clk *apps_fab_clk, *ddr_fab_clk; ++ int ret; ++ ++ if (!np) ++ return -ENODEV; ++ ++ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); ++ if (!drv_data) ++ return -ENOMEM; ++ ++ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) { ++ pr_err("FABRICS turbo freq not found. Using defaults...\n"); ++ drv_data->fab_freq_high = 533000000; ++ } ++ ++ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) { ++ pr_err("FABRICS nominal freq not found. Using defaults...\n"); ++ drv_data->fab_freq_nominal = 400000000; ++ } ++ ++ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) { ++ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n"); ++ drv_data->cpu_freq_threshold = 1000000000; ++ } ++ ++ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk"); ++ ret = PTR_ERR_OR_ZERO(apps_fab_clk); ++ if (ret) { ++ /* ++ * If apps fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get APPS FABRIC clock: %d\n", ret); ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_prepare_enable(apps_fab_clk); ++ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high); ++ drv_data->apps_fab_clk = apps_fab_clk; ++ ++ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk"); ++ ret = PTR_ERR_OR_ZERO(ddr_fab_clk); ++ if (ret) { ++ /* ++ * If ddr fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get DDR FABRIC clock: %d\n", ret); ++ ddr_fab_clk = NULL; ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_prepare_enable(ddr_fab_clk); ++ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high); ++ drv_data->ddr_fab_clk = ddr_fab_clk; ++ ++ return 0; ++err: ++ kfree(drv_data); ++ return ret; ++} ++ ++static int ipq806x_fab_scaling_remove(struct platform_device *pdev) ++{ ++ kfree(drv_data); ++ return 0; ++} ++ ++static const struct of_device_id fab_scaling_ipq806x_match_table[] = { ++ { .compatible = "qcom,fab-scaling" }, ++ { } ++}; ++ ++static struct platform_driver fab_scaling_ipq806x_driver = { ++ .probe = ipq806x_fab_scaling_probe, ++ .remove = ipq806x_fab_scaling_remove, ++ .driver = { ++ .name = "fab-scaling", ++ .of_match_table = fab_scaling_ipq806x_match_table, ++ }, ++}; ++ ++static int __init fab_scaling_ipq806x_init(void) ++{ ++ return platform_driver_register(&fab_scaling_ipq806x_driver); ++} ++late_initcall(fab_scaling_ipq806x_init); ++ ++static void __exit fab_scaling_ipq806x_exit(void) ++{ ++ platform_driver_unregister(&fab_scaling_ipq806x_driver); ++} ++module_exit(fab_scaling_ipq806x_exit); +--- /dev/null ++++ b/include/linux/fab_scaling.h +@@ -0,0 +1,31 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++ ++#ifndef __FAB_SCALING_H ++#define __FAB_SCALING_H ++ ++/** ++ * scale_fabrics - Scale DDR and APPS FABRICS ++ * ++ * This function monitors all the registered clocks and does APPS ++ * and DDR FABRIC scaling based on the idle frequencies with which ++ * it was registered. ++ * ++ */ ++int scale_fabrics(unsigned long max_cpu_freq); ++ ++#endif +--- a/drivers/cpufreq/qcom-cpufreq-krait.c ++++ b/drivers/cpufreq/qcom-cpufreq-krait.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + + #include "cpufreq-dt.h" + +@@ -58,6 +59,13 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) + level = dev_pm_opp_get_level(opp); + dev_pm_opp_put(opp); + ++ /* ++ * Scale fabrics with max freq across all cores ++ */ ++ ret = scale_fabrics(target_freq); ++ if (ret) ++ return ret; ++ + opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level); + if (IS_ERR(opp)) { + dev_err(&l2_pdev->dev,