From: Dan Halperin <dhalperi@cs.washington.edu>
Date: Fri, 19 Feb 2010 06:01:39 +0000 (-0800)
Subject: iwlwifi: set HT flags after channel in rxon
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5e2f75b8993a0d83d469388b50716dd5551f2eb4;p=openwrt%2Fstaging%2Fblogic.git

iwlwifi: set HT flags after channel in rxon

The HT extension channel settings require priv->staging_rxon.channel to be
accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel
and thus HT40 could be broken unless another call to iwl_mac_config came in.

This problem was recently introduced by "iwlwifi: Fix to set correct ht
configuration"

The particular setting in which I noticed this was monitor mode:

	iwconfig wlan0 mode monitor
	ifconfig wlan0 up
	./iw wlan0 set channel 64 HT40-
	#./iw wlan0 set channel 64 HT40-
	tcpdump -i wlan0 -y IEEE802_11_RADIO

would only catch HT40 packets if I issued the IW command twice.

From visual inspection, iwl_set_rxon_channel does not depend on
iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d10bea64fce3..f36f804804fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2744,8 +2744,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
 			priv->staging_rxon.flags = 0;
 
-		iwl_set_rxon_ht(priv, ht_conf);
 		iwl_set_rxon_channel(priv, conf->channel);
+		iwl_set_rxon_ht(priv, ht_conf);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
 		spin_unlock_irqrestore(&priv->lock, flags);