From: Roger Pueyo Centelles Date: Sun, 6 Nov 2016 12:00:38 +0000 (+0100) Subject: ramips: Add support for Wavlink WL-WN575A3 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5f6e94855113b0c37fba57eda4af0b0427457b98;p=openwrt%2Fstaging%2Fwigyori.git ramips: Add support for Wavlink WL-WN575A3 This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 27e15caf4d..8d6bb459c4 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -312,6 +312,12 @@ whr-600d) ucidef_set_led_default "power" "power" "$board:green:power" "1" ucidef_set_led_default "router" "router" "$board:green:router" "1" ;; +wl-wn575a3) + ucidef_set_rssimon "wlan1" "40000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1" + ;; wrh-300cr) set_wifi_led "$board:green:wlan" ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ece48c08e0..ecdae638f5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -90,6 +90,7 @@ ramips_setup_interfaces() whr-300hp2|\ whr-600d|\ witi|\ + wl-wn575a3|\ wndr3700v5|\ wsr-1166|\ wsr-600|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 50bdffc5fa..2560eb7c6a 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -499,6 +499,9 @@ ramips_board_detect() { *"WL-351 v1 002") name="wl-351" ;; + *"WL-WN575A3") + name="wl-wn575a3" + ;; *"WLI-TX4-AG300N") name="wli-tx4-ag300n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index da496e8ab5..7f161f5342 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -145,6 +145,7 @@ platform_check_image() { wl-330n3g|\ wl-341v3|\ wl-351|\ + wl-wn575a3|\ wli-tx4-ag300n|\ wmr-300|\ wnce2001|\ diff --git a/target/linux/ramips/dts/WL-WN575A3.dts b/target/linux/ramips/dts/WL-WN575A3.dts new file mode 100644 index 0000000000..267482407f --- /dev/null +++ b/target/linux/ramips/dts/WL-WN575A3.dts @@ -0,0 +1,130 @@ +/dts-v1/; +#include +#include + +#include "mt7628an.dtsi" + +/ { + compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc"; + model = "Wavlink WL-WN575A3"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi-high { + label = "wl-wn575a3:green:wifi-high"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + wifi-med { + label = "wl-wn575a3:green:wifi-med"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wifi-low { + label = "wl-wn575a3:green:wifi-low"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wl-wn575a3:green:wps"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; +}; + +&wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x4>; +}; + +ðernet { + mtd-mac-address = <&factory 0x2e>; + ralink,port-map = "llllw"; +}; diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk index 75fbb3dabd..7a7ddce3c9 100644 --- a/target/linux/ramips/image/mt7628.mk +++ b/target/linux/ramips/image/mt7628.mk @@ -19,6 +19,13 @@ define Device/miwifi-nano endef TARGET_DEVICES += miwifi-nano +define Device/wl-wn575a3 + DTS := WL-WN575A3 + IMAGE_SIZE := $(ralink_default_fw_size_8M) + DEVICE_TITLE := Wavlink WL-WN575A3 +endef +TARGET_DEVICES += wl-wn575a3 + define Device/wrtnode2p DTS := WRTNODE2P IMAGE_SIZE := $(ralink_default_fw_size_16M)