From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 12 Oct 2012 01:21:02 +0000 (+0900)
Subject: Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5f76945a9c978b8b8bf8eb7fe3b17b9981240a97;p=openwrt%2Fstaging%2Fblogic.git

Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 "This includes:
   - large updates for OMAP
     - basic OMAP5 DSS support for DPI and DSI outputs
     - large cleanups and restructuring
   - some update to Exynos and da8xx-fb
   - removal of the pnx4008 driver (arch removed)
   - various other small patches"

Fix up some trivial conflicts (mostly just include line changes, but
also some due to the renaming of the deferred work functions by Tejun).

* tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits)
  gbefb: fix compile error
  video: mark nuc900fb_map_video_memory as __devinit
  video/mx3fb: set .owner to prevent module unloading while being used
  video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare
  drivers/video/exynos/exynos_mipi_dsi.c: fix error return code
  drivers/video/savage/savagefb_driver.c: fix error return code
  video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare
  da8xx-fb: save and restore LCDC context across suspend/resume cycle
  da8xx-fb: add pm_runtime support
  video/udlfb: fix line counting in fb_write
  OMAPDSS: add missing include for string.h
  OMAPDSS: DISPC: Configure color conversion coefficients for writeback
  OMAPDSS: DISPC: Add manager like functions for writeback
  OMAPDSS: DISPC: Configure writeback FIFOs
  OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup()
  OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
  OMAPDSS: DISPC: Add function to set channel in for writeback
  OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
  OMAPDSS: DISPC: Downscale chroma if plane is writeback
  OMAPDSS: DISPC: Configure input and output sizes for writeback
  ...
---

5f76945a9c978b8b8bf8eb7fe3b17b9981240a97
diff --cc arch/arm/mach-exynos/mach-smdk4x12.c
index 7a265d1a82d3,ee069b47ef26..730f1ac65928
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@@ -33,10 -33,9 +34,9 @@@
  #include <plat/devs.h>
  #include <plat/fb.h>
  #include <plat/gpio-cfg.h>
 -#include <plat/iic.h>
 +#include <linux/platform_data/i2c-s3c2410.h>
  #include <plat/keypad.h>
  #include <plat/mfc.h>
- #include <plat/regs-fb.h>
  #include <plat/regs-serial.h>
  #include <plat/sdhci.h>
  
diff --cc arch/arm/mach-omap2/twl-common.c
index d83ae4540b9b,9bf8a89e78c6..635e109f5ad3
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@@ -237,8 -251,17 +237,12 @@@ void __init omap3_pmic_get_config(struc
  
  #if defined(CONFIG_ARCH_OMAP4)
  static struct twl4030_usb_data omap4_usb_pdata = {
 -	.phy_init	= omap4430_phy_init,
 -	.phy_exit	= omap4430_phy_exit,
 -	.phy_power	= omap4430_phy_power,
 -	.phy_set_clock	= omap4430_phy_set_clk,
 -	.phy_suspend	= omap4430_phy_suspend,
  };
  
+ static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = {
+ 	REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"),
+ };
+ 
  static struct regulator_init_data omap4_vdac_idata = {
  	.constraints = {
  		.min_uV			= 1800000,
diff --cc arch/arm/mach-s3c24xx/mach-smdk2416.c
index db2787aa1e5e,96478f05fc00..f30d7fccbfee
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@@ -47,12 -48,11 +48,11 @@@
  #include <plat/clock.h>
  #include <plat/devs.h>
  #include <plat/cpu.h>
 -#include <plat/nand.h>
 +#include <linux/platform_data/mtd-nand-s3c2410.h>
  #include <plat/sdhci.h>
 -#include <plat/udc.h>
 +#include <linux/platform_data/usb-s3c2410_udc.h>
  #include <linux/platform_data/s3c-hsudc.h>
  
- #include <plat/regs-fb-v4.h>
  #include <plat/fb.h>
  
  #include <plat/common-smdk.h>
diff --cc arch/arm/mach-s3c64xx/mach-anw6410.c
index 15c58dfc4584,f7a108bafd4c..99e82ac81b69
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@@ -42,9 -43,8 +43,8 @@@
  #include <asm/mach-types.h>
  
  #include <plat/regs-serial.h>
 -#include <plat/iic.h>
 +#include <linux/platform_data/i2c-s3c2410.h>
  #include <plat/fb.h>
- #include <plat/regs-fb-v4.h>
  
  #include <plat/clock.h>
  #include <plat/devs.h>
diff --cc arch/arm/mach-s3c64xx/mach-mini6410.c
index 09311cc40115,96ebcc5944c3..07c349cca333
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@@ -38,12 -38,12 +38,12 @@@
  #include <plat/cpu.h>
  #include <plat/devs.h>
  #include <plat/fb.h>
 -#include <plat/nand.h>
 +#include <linux/platform_data/mtd-nand-s3c2410.h>
  #include <plat/regs-serial.h>
 -#include <plat/ts.h>
 +#include <linux/platform_data/touchscreen-s3c2410.h>
- #include <plat/regs-fb-v4.h>
  
  #include <video/platform_lcd.h>
+ #include <video/samsung_fimd.h>
  
  #include "common.h"
  
diff --cc arch/arm/mach-s3c64xx/mach-real6410.c
index 6daca203e72b,76d3ffbe9a92..7476f7c722ab
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@@ -39,12 -39,12 +39,12 @@@
  #include <plat/cpu.h>
  #include <plat/devs.h>
  #include <plat/fb.h>
 -#include <plat/nand.h>
 +#include <linux/platform_data/mtd-nand-s3c2410.h>
  #include <plat/regs-serial.h>
 -#include <plat/ts.h>
 +#include <linux/platform_data/touchscreen-s3c2410.h>
- #include <plat/regs-fb-v4.h>
  
  #include <video/platform_lcd.h>
+ #include <video/samsung_fimd.h>
  
  #include "common.h"
  
diff --cc arch/arm/mach-s3c64xx/mach-smdk6410.c
index 2547a8846472,d1378d76e151..da1a771a29e9
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@@ -69,10 -70,9 +70,9 @@@
  #include <plat/devs.h>
  #include <plat/cpu.h>
  #include <plat/adc.h>
 -#include <plat/ts.h>
 +#include <linux/platform_data/touchscreen-s3c2410.h>
  #include <plat/keypad.h>
  #include <plat/backlight.h>
- #include <plat/regs-fb-v4.h>
  
  #include "common.h"
  
diff --cc arch/arm/mach-s5pc100/mach-smdkc100.c
index 5d2c0934928b,c3dcafa559b1..dba7384a87bd
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@@ -44,14 -45,13 +45,13 @@@
  #include <plat/devs.h>
  #include <plat/cpu.h>
  #include <plat/fb.h>
 -#include <plat/iic.h>
 -#include <plat/ata.h>
 +#include <linux/platform_data/i2c-s3c2410.h>
 +#include <linux/platform_data/ata-samsung_cf.h>
  #include <plat/adc.h>
  #include <plat/keypad.h>
 -#include <plat/ts.h>
 -#include <plat/audio.h>
 +#include <linux/platform_data/touchscreen-s3c2410.h>
 +#include <linux/platform_data/asoc-s3c.h>
  #include <plat/backlight.h>
- #include <plat/regs-fb-v4.h>
  
  #include "common.h"
  
diff --cc drivers/media/platform/omap/omap_vout.c
index 134016f0e660,000000000000..a3b1a34c896d
mode 100644,000000..100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@@ -1,2291 -1,0 +1,2316 @@@
 +/*
 + * omap_vout.c
 + *
 + * Copyright (C) 2005-2010 Texas Instruments.
 + *
 + * This file is licensed under the terms of the GNU General Public License
 + * version 2. This program is licensed "as is" without any warranty of any
 + * kind, whether express or implied.
 + *
 + * Leveraged code from the OMAP2 camera driver
 + * Video-for-Linux (Version 2) camera capture driver for
 + * the OMAP24xx camera controller.
 + *
 + * Author: Andy Lowe (source@mvista.com)
 + *
 + * Copyright (C) 2004 MontaVista Software, Inc.
 + * Copyright (C) 2010 Texas Instruments.
 + *
 + * History:
 + * 20-APR-2006 Khasim		Modified VRFB based Rotation,
 + *				The image data is always read from 0 degree
 + *				view and written
 + *				to the virtual space of desired rotation angle
 + * 4-DEC-2006  Jian		Changed to support better memory management
 + *
 + * 17-Nov-2008 Hardik		Changed driver to use video_ioctl2
 + *
 + * 23-Feb-2010 Vaibhav H	Modified to use new DSS2 interface
 + *
 + */
 +
 +#include <linux/init.h>
 +#include <linux/module.h>
 +#include <linux/vmalloc.h>
 +#include <linux/sched.h>
 +#include <linux/types.h>
 +#include <linux/platform_device.h>
 +#include <linux/irq.h>
 +#include <linux/videodev2.h>
 +#include <linux/dma-mapping.h>
 +#include <linux/slab.h>
 +
 +#include <media/videobuf-dma-contig.h>
 +#include <media/v4l2-device.h>
 +#include <media/v4l2-ioctl.h>
 +
 +#include <plat/cpu.h>
 +#include <plat/dma.h>
 +#include <plat/vrfb.h>
 +#include <video/omapdss.h>
 +
 +#include "omap_voutlib.h"
 +#include "omap_voutdef.h"
 +#include "omap_vout_vrfb.h"
 +
 +MODULE_AUTHOR("Texas Instruments");
 +MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
 +MODULE_LICENSE("GPL");
 +
 +/* Driver Configuration macros */
 +#define VOUT_NAME		"omap_vout"
 +
 +enum omap_vout_channels {
 +	OMAP_VIDEO1,
 +	OMAP_VIDEO2,
 +};
 +
 +static struct videobuf_queue_ops video_vbq_ops;
 +/* Variables configurable through module params*/
 +static u32 video1_numbuffers = 3;
 +static u32 video2_numbuffers = 3;
 +static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
 +static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
 +static bool vid1_static_vrfb_alloc;
 +static bool vid2_static_vrfb_alloc;
 +static bool debug;
 +
 +/* Module parameters */
 +module_param(video1_numbuffers, uint, S_IRUGO);
 +MODULE_PARM_DESC(video1_numbuffers,
 +	"Number of buffers to be allocated at init time for Video1 device.");
 +
 +module_param(video2_numbuffers, uint, S_IRUGO);
 +MODULE_PARM_DESC(video2_numbuffers,
 +	"Number of buffers to be allocated at init time for Video2 device.");
 +
 +module_param(video1_bufsize, uint, S_IRUGO);
 +MODULE_PARM_DESC(video1_bufsize,
 +	"Size of the buffer to be allocated for video1 device");
 +
 +module_param(video2_bufsize, uint, S_IRUGO);
 +MODULE_PARM_DESC(video2_bufsize,
 +	"Size of the buffer to be allocated for video2 device");
 +
 +module_param(vid1_static_vrfb_alloc, bool, S_IRUGO);
 +MODULE_PARM_DESC(vid1_static_vrfb_alloc,
 +	"Static allocation of the VRFB buffer for video1 device");
 +
 +module_param(vid2_static_vrfb_alloc, bool, S_IRUGO);
 +MODULE_PARM_DESC(vid2_static_vrfb_alloc,
 +	"Static allocation of the VRFB buffer for video2 device");
 +
 +module_param(debug, bool, S_IRUGO);
 +MODULE_PARM_DESC(debug, "Debug level (0-1)");
 +
 +/* list of image formats supported by OMAP2 video pipelines */
 +static const struct v4l2_fmtdesc omap_formats[] = {
 +	{
 +		/* Note:  V4L2 defines RGB565 as:
 +		 *
 +		 *      Byte 0                    Byte 1
 +		 *      g2 g1 g0 r4 r3 r2 r1 r0   b4 b3 b2 b1 b0 g5 g4 g3
 +		 *
 +		 * We interpret RGB565 as:
 +		 *
 +		 *      Byte 0                    Byte 1
 +		 *      g2 g1 g0 b4 b3 b2 b1 b0   r4 r3 r2 r1 r0 g5 g4 g3
 +		 */
 +		.description = "RGB565, le",
 +		.pixelformat = V4L2_PIX_FMT_RGB565,
 +	},
 +	{
 +		/* Note:  V4L2 defines RGB32 as: RGB-8-8-8-8  we use
 +		 *  this for RGB24 unpack mode, the last 8 bits are ignored
 +		 * */
 +		.description = "RGB32, le",
 +		.pixelformat = V4L2_PIX_FMT_RGB32,
 +	},
 +	{
 +		/* Note:  V4L2 defines RGB24 as: RGB-8-8-8  we use
 +		 *        this for RGB24 packed mode
 +		 *
 +		 */
 +		.description = "RGB24, le",
 +		.pixelformat = V4L2_PIX_FMT_RGB24,
 +	},
 +	{
 +		.description = "YUYV (YUV 4:2:2), packed",
 +		.pixelformat = V4L2_PIX_FMT_YUYV,
 +	},
 +	{
 +		.description = "UYVY, packed",
 +		.pixelformat = V4L2_PIX_FMT_UYVY,
 +	},
 +};
 +
 +#define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats))
 +
 +/*
 + * Try format
 + */
 +static int omap_vout_try_format(struct v4l2_pix_format *pix)
 +{
 +	int ifmt, bpp = 0;
 +
 +	pix->height = clamp(pix->height, (u32)VID_MIN_HEIGHT,
 +						(u32)VID_MAX_HEIGHT);
 +	pix->width = clamp(pix->width, (u32)VID_MIN_WIDTH, (u32)VID_MAX_WIDTH);
 +
 +	for (ifmt = 0; ifmt < NUM_OUTPUT_FORMATS; ifmt++) {
 +		if (pix->pixelformat == omap_formats[ifmt].pixelformat)
 +			break;
 +	}
 +
 +	if (ifmt == NUM_OUTPUT_FORMATS)
 +		ifmt = 0;
 +
 +	pix->pixelformat = omap_formats[ifmt].pixelformat;
 +	pix->field = V4L2_FIELD_ANY;
 +	pix->priv = 0;
 +
 +	switch (pix->pixelformat) {
 +	case V4L2_PIX_FMT_YUYV:
 +	case V4L2_PIX_FMT_UYVY:
 +	default:
 +		pix->colorspace = V4L2_COLORSPACE_JPEG;
 +		bpp = YUYV_BPP;
 +		break;
 +	case V4L2_PIX_FMT_RGB565:
 +	case V4L2_PIX_FMT_RGB565X:
 +		pix->colorspace = V4L2_COLORSPACE_SRGB;
 +		bpp = RGB565_BPP;
 +		break;
 +	case V4L2_PIX_FMT_RGB24:
 +		pix->colorspace = V4L2_COLORSPACE_SRGB;
 +		bpp = RGB24_BPP;
 +		break;
 +	case V4L2_PIX_FMT_RGB32:
 +	case V4L2_PIX_FMT_BGR32:
 +		pix->colorspace = V4L2_COLORSPACE_SRGB;
 +		bpp = RGB32_BPP;
 +		break;
 +	}
 +	pix->bytesperline = pix->width * bpp;
 +	pix->sizeimage = pix->bytesperline * pix->height;
 +
 +	return bpp;
 +}
 +
 +/*
 + * omap_vout_uservirt_to_phys: This inline function is used to convert user
 + * space virtual address to physical address.
 + */
 +static u32 omap_vout_uservirt_to_phys(u32 virtp)
 +{
 +	unsigned long physp = 0;
 +	struct vm_area_struct *vma;
 +	struct mm_struct *mm = current->mm;
 +
 +	vma = find_vma(mm, virtp);
 +	/* For kernel direct-mapped memory, take the easy way */
 +	if (virtp >= PAGE_OFFSET) {
 +		physp = virt_to_phys((void *) virtp);
 +	} else if (vma && (vma->vm_flags & VM_IO) && vma->vm_pgoff) {
 +		/* this will catch, kernel-allocated, mmaped-to-usermode
 +		   addresses */
 +		physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
 +	} else {
 +		/* otherwise, use get_user_pages() for general userland pages */
 +		int res, nr_pages = 1;
 +		struct page *pages;
 +		down_read(&current->mm->mmap_sem);
 +
 +		res = get_user_pages(current, current->mm, virtp, nr_pages, 1,
 +				0, &pages, NULL);
 +		up_read(&current->mm->mmap_sem);
 +
 +		if (res == nr_pages) {
 +			physp =  __pa(page_address(&pages[0]) +
 +					(virtp & ~PAGE_MASK));
 +		} else {
 +			printk(KERN_WARNING VOUT_NAME
 +					"get_user_pages failed\n");
 +			return 0;
 +		}
 +	}
 +
 +	return physp;
 +}
 +
 +/*
 + * Free the V4L2 buffers
 + */
 +void omap_vout_free_buffers(struct omap_vout_device *vout)
 +{
 +	int i, numbuffers;
 +
 +	/* Allocate memory for the buffers */
 +	numbuffers = (vout->vid) ?  video2_numbuffers : video1_numbuffers;
 +	vout->buffer_size = (vout->vid) ? video2_bufsize : video1_bufsize;
 +
 +	for (i = 0; i < numbuffers; i++) {
 +		omap_vout_free_buffer(vout->buf_virt_addr[i],
 +				vout->buffer_size);
 +		vout->buf_phy_addr[i] = 0;
 +		vout->buf_virt_addr[i] = 0;
 +	}
 +}
 +
 +/*
 + * Convert V4L2 rotation to DSS rotation
 + *	V4L2 understand 0, 90, 180, 270.
 + *	Convert to 0, 1, 2 and 3 respectively for DSS
 + */
 +static int v4l2_rot_to_dss_rot(int v4l2_rotation,
 +			enum dss_rotation *rotation, bool mirror)
 +{
 +	int ret = 0;
 +
 +	switch (v4l2_rotation) {
 +	case 90:
 +		*rotation = dss_rotation_90_degree;
 +		break;
 +	case 180:
 +		*rotation = dss_rotation_180_degree;
 +		break;
 +	case 270:
 +		*rotation = dss_rotation_270_degree;
 +		break;
 +	case 0:
 +		*rotation = dss_rotation_0_degree;
 +		break;
 +	default:
 +		ret = -EINVAL;
 +	}
 +	return ret;
 +}
 +
 +static int omap_vout_calculate_offset(struct omap_vout_device *vout)
 +{
 +	struct omapvideo_info *ovid;
 +	struct v4l2_rect *crop = &vout->crop;
 +	struct v4l2_pix_format *pix = &vout->pix;
 +	int *cropped_offset = &vout->cropped_offset;
 +	int ps = 2, line_length = 0;
 +
 +	ovid = &vout->vid_info;
 +
 +	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 +		omap_vout_calculate_vrfb_offset(vout);
 +	} else {
 +		vout->line_length = line_length = pix->width;
 +
 +		if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
 +			V4L2_PIX_FMT_UYVY == pix->pixelformat)
 +			ps = 2;
 +		else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat)
 +			ps = 4;
 +		else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat)
 +			ps = 3;
 +
 +		vout->ps = ps;
 +
 +		*cropped_offset = (line_length * ps) *
 +			crop->top + crop->left * ps;
 +	}
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n",
 +			__func__, vout->cropped_offset);
 +
 +	return 0;
 +}
 +
 +/*
 + * Convert V4L2 pixel format to DSS pixel format
 + */
 +static int video_mode_to_dss_mode(struct omap_vout_device *vout)
 +{
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct v4l2_pix_format *pix = &vout->pix;
 +	enum omap_color_mode mode;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	switch (pix->pixelformat) {
 +	case 0:
 +		break;
 +	case V4L2_PIX_FMT_YUYV:
 +		mode = OMAP_DSS_COLOR_YUV2;
 +		break;
 +	case V4L2_PIX_FMT_UYVY:
 +		mode = OMAP_DSS_COLOR_UYVY;
 +		break;
 +	case V4L2_PIX_FMT_RGB565:
 +		mode = OMAP_DSS_COLOR_RGB16;
 +		break;
 +	case V4L2_PIX_FMT_RGB24:
 +		mode = OMAP_DSS_COLOR_RGB24P;
 +		break;
 +	case V4L2_PIX_FMT_RGB32:
 +		mode = (ovl->id == OMAP_DSS_VIDEO1) ?
 +			OMAP_DSS_COLOR_RGB24U : OMAP_DSS_COLOR_ARGB32;
 +		break;
 +	case V4L2_PIX_FMT_BGR32:
 +		mode = OMAP_DSS_COLOR_RGBX32;
 +		break;
 +	default:
 +		mode = -EINVAL;
 +	}
 +	return mode;
 +}
 +
 +/*
 + * Setup the overlay
 + */
 +static int omapvid_setup_overlay(struct omap_vout_device *vout,
 +		struct omap_overlay *ovl, int posx, int posy, int outw,
 +		int outh, u32 addr)
 +{
 +	int ret = 0;
 +	struct omap_overlay_info info;
 +	int cropheight, cropwidth, pixheight, pixwidth;
 +
 +	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 &&
 +			(outw != vout->pix.width || outh != vout->pix.height)) {
 +		ret = -EINVAL;
 +		goto setup_ovl_err;
 +	}
 +
 +	vout->dss_mode = video_mode_to_dss_mode(vout);
 +	if (vout->dss_mode == -EINVAL) {
 +		ret = -EINVAL;
 +		goto setup_ovl_err;
 +	}
 +
 +	/* Setup the input plane parameters according to
 +	 * rotation value selected.
 +	 */
 +	if (is_rotation_90_or_270(vout)) {
 +		cropheight = vout->crop.width;
 +		cropwidth = vout->crop.height;
 +		pixheight = vout->pix.width;
 +		pixwidth = vout->pix.height;
 +	} else {
 +		cropheight = vout->crop.height;
 +		cropwidth = vout->crop.width;
 +		pixheight = vout->pix.height;
 +		pixwidth = vout->pix.width;
 +	}
 +
 +	ovl->get_overlay_info(ovl, &info);
 +	info.paddr = addr;
 +	info.width = cropwidth;
 +	info.height = cropheight;
 +	info.color_mode = vout->dss_mode;
 +	info.mirror = vout->mirror;
 +	info.pos_x = posx;
 +	info.pos_y = posy;
 +	info.out_width = outw;
 +	info.out_height = outh;
 +	info.global_alpha = vout->win.global_alpha;
 +	if (!is_rotation_enabled(vout)) {
 +		info.rotation = 0;
 +		info.rotation_type = OMAP_DSS_ROT_DMA;
 +		info.screen_width = pixwidth;
 +	} else {
 +		info.rotation = vout->rotation;
 +		info.rotation_type = OMAP_DSS_ROT_VRFB;
 +		info.screen_width = 2048;
 +	}
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 +		"%s enable=%d addr=%x width=%d\n height=%d color_mode=%d\n"
 +		"rotation=%d mirror=%d posx=%d posy=%d out_width = %d \n"
 +		"out_height=%d rotation_type=%d screen_width=%d\n",
 +		__func__, ovl->is_enabled(ovl), info.paddr, info.width, info.height,
 +		info.color_mode, info.rotation, info.mirror, info.pos_x,
 +		info.pos_y, info.out_width, info.out_height, info.rotation_type,
 +		info.screen_width);
 +
 +	ret = ovl->set_overlay_info(ovl, &info);
 +	if (ret)
 +		goto setup_ovl_err;
 +
 +	return 0;
 +
 +setup_ovl_err:
 +	v4l2_warn(&vout->vid_dev->v4l2_dev, "setup_overlay failed\n");
 +	return ret;
 +}
 +
 +/*
 + * Initialize the overlay structure
 + */
 +static int omapvid_init(struct omap_vout_device *vout, u32 addr)
 +{
 +	int ret = 0, i;
 +	struct v4l2_window *win;
 +	struct omap_overlay *ovl;
 +	int posx, posy, outw, outh, temp;
 +	struct omap_video_timings *timing;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +
 +	win = &vout->win;
 +	for (i = 0; i < ovid->num_overlays; i++) {
++		struct omap_dss_device *dssdev;
++
 +		ovl = ovid->overlays[i];
- 		if (!ovl->manager || !ovl->manager->device)
++		dssdev = ovl->get_device(ovl);
++
++		if (!dssdev)
 +			return -EINVAL;
 +
- 		timing = &ovl->manager->device->panel.timings;
++		timing = &dssdev->panel.timings;
 +
 +		outw = win->w.width;
 +		outh = win->w.height;
 +		switch (vout->rotation) {
 +		case dss_rotation_90_degree:
 +			/* Invert the height and width for 90
 +			 * and 270 degree rotation
 +			 */
 +			temp = outw;
 +			outw = outh;
 +			outh = temp;
 +			posy = (timing->y_res - win->w.width) - win->w.left;
 +			posx = win->w.top;
 +			break;
 +
 +		case dss_rotation_180_degree:
 +			posx = (timing->x_res - win->w.width) - win->w.left;
 +			posy = (timing->y_res - win->w.height) - win->w.top;
 +			break;
 +
 +		case dss_rotation_270_degree:
 +			temp = outw;
 +			outw = outh;
 +			outh = temp;
 +			posy = win->w.left;
 +			posx = (timing->x_res - win->w.height) - win->w.top;
 +			break;
 +
 +		default:
 +			posx = win->w.left;
 +			posy = win->w.top;
 +			break;
 +		}
 +
 +		ret = omapvid_setup_overlay(vout, ovl, posx, posy,
 +				outw, outh, addr);
 +		if (ret)
 +			goto omapvid_init_err;
 +	}
 +	return 0;
 +
 +omapvid_init_err:
 +	v4l2_warn(&vout->vid_dev->v4l2_dev, "apply_changes failed\n");
 +	return ret;
 +}
 +
 +/*
 + * Apply the changes set the go bit of DSS
 + */
 +static int omapvid_apply_changes(struct omap_vout_device *vout)
 +{
 +	int i;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +
 +	for (i = 0; i < ovid->num_overlays; i++) {
++		struct omap_dss_device *dssdev;
++
 +		ovl = ovid->overlays[i];
- 		if (!ovl->manager || !ovl->manager->device)
++		dssdev = ovl->get_device(ovl);
++		if (!dssdev)
 +			return -EINVAL;
 +		ovl->manager->apply(ovl->manager);
 +	}
 +
 +	return 0;
 +}
 +
 +static int omapvid_handle_interlace_display(struct omap_vout_device *vout,
 +		unsigned int irqstatus, struct timeval timevalue)
 +{
 +	u32 fid;
 +
 +	if (vout->first_int) {
 +		vout->first_int = 0;
 +		goto err;
 +	}
 +
 +	if (irqstatus & DISPC_IRQ_EVSYNC_ODD)
 +		fid = 1;
 +	else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN)
 +		fid = 0;
 +	else
 +		goto err;
 +
 +	vout->field_id ^= 1;
 +	if (fid != vout->field_id) {
 +		if (fid == 0)
 +			vout->field_id = fid;
 +	} else if (0 == fid) {
 +		if (vout->cur_frm == vout->next_frm)
 +			goto err;
 +
 +		vout->cur_frm->ts = timevalue;
 +		vout->cur_frm->state = VIDEOBUF_DONE;
 +		wake_up_interruptible(&vout->cur_frm->done);
 +		vout->cur_frm = vout->next_frm;
 +	} else {
 +		if (list_empty(&vout->dma_queue) ||
 +				(vout->cur_frm != vout->next_frm))
 +			goto err;
 +	}
 +
 +	return vout->field_id;
 +err:
 +	return 0;
 +}
 +
 +static void omap_vout_isr(void *arg, unsigned int irqstatus)
 +{
 +	int ret, fid, mgr_id;
 +	u32 addr, irq;
 +	struct omap_overlay *ovl;
 +	struct timeval timevalue;
 +	struct omapvideo_info *ovid;
 +	struct omap_dss_device *cur_display;
 +	struct omap_vout_device *vout = (struct omap_vout_device *)arg;
 +
 +	if (!vout->streaming)
 +		return;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
- 	/* get the display device attached to the overlay */
- 	if (!ovl->manager || !ovl->manager->device)
- 		return;
 +
 +	mgr_id = ovl->manager->id;
- 	cur_display = ovl->manager->device;
++
++	/* get the display device attached to the overlay */
++	cur_display = ovl->get_device(ovl);
++
++	if (!cur_display)
++		return;
 +
 +	spin_lock(&vout->vbq_lock);
 +	do_gettimeofday(&timevalue);
 +
 +	switch (cur_display->type) {
 +	case OMAP_DISPLAY_TYPE_DSI:
 +	case OMAP_DISPLAY_TYPE_DPI:
 +		if (mgr_id == OMAP_DSS_CHANNEL_LCD)
 +			irq = DISPC_IRQ_VSYNC;
 +		else if (mgr_id == OMAP_DSS_CHANNEL_LCD2)
 +			irq = DISPC_IRQ_VSYNC2;
 +		else
 +			goto vout_isr_err;
 +
 +		if (!(irqstatus & irq))
 +			goto vout_isr_err;
 +		break;
 +	case OMAP_DISPLAY_TYPE_VENC:
 +		fid = omapvid_handle_interlace_display(vout, irqstatus,
 +				timevalue);
 +		if (!fid)
 +			goto vout_isr_err;
 +		break;
 +	case OMAP_DISPLAY_TYPE_HDMI:
 +		if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN))
 +			goto vout_isr_err;
 +		break;
 +	default:
 +		goto vout_isr_err;
 +	}
 +
 +	if (!vout->first_int && (vout->cur_frm != vout->next_frm)) {
 +		vout->cur_frm->ts = timevalue;
 +		vout->cur_frm->state = VIDEOBUF_DONE;
 +		wake_up_interruptible(&vout->cur_frm->done);
 +		vout->cur_frm = vout->next_frm;
 +	}
 +
 +	vout->first_int = 0;
 +	if (list_empty(&vout->dma_queue))
 +		goto vout_isr_err;
 +
 +	vout->next_frm = list_entry(vout->dma_queue.next,
 +			struct videobuf_buffer, queue);
 +	list_del(&vout->next_frm->queue);
 +
 +	vout->next_frm->state = VIDEOBUF_ACTIVE;
 +
 +	addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i]
 +		+ vout->cropped_offset;
 +
 +	/* First save the configuration in ovelray structure */
 +	ret = omapvid_init(vout, addr);
 +	if (ret)
 +		printk(KERN_ERR VOUT_NAME
 +			"failed to set overlay info\n");
 +	/* Enable the pipeline and set the Go bit */
 +	ret = omapvid_apply_changes(vout);
 +	if (ret)
 +		printk(KERN_ERR VOUT_NAME "failed to change mode\n");
 +
 +vout_isr_err:
 +	spin_unlock(&vout->vbq_lock);
 +}
 +
 +/* Video buffer call backs */
 +
 +/*
 + * Buffer setup function is called by videobuf layer when REQBUF ioctl is
 + * called. This is used to setup buffers and return size and count of
 + * buffers allocated. After the call to this buffer, videobuf layer will
 + * setup buffer queue depending on the size and count of buffers
 + */
 +static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 +			  unsigned int *size)
 +{
 +	int startindex = 0, i, j;
 +	u32 phy_addr = 0, virt_addr = 0;
 +	struct omap_vout_device *vout = q->priv_data;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +	int vid_max_buf_size;
 +
 +	if (!vout)
 +		return -EINVAL;
 +
 +	vid_max_buf_size = vout->vid == OMAP_VIDEO1 ? video1_bufsize :
 +		video2_bufsize;
 +
 +	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != q->type)
 +		return -EINVAL;
 +
 +	startindex = (vout->vid == OMAP_VIDEO1) ?
 +		video1_numbuffers : video2_numbuffers;
 +	if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex)
 +		*count = startindex;
 +
 +	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 +		if (omap_vout_vrfb_buffer_setup(vout, count, startindex))
 +			return -ENOMEM;
 +	}
 +
 +	if (V4L2_MEMORY_MMAP != vout->memory)
 +		return 0;
 +
 +	/* Now allocated the V4L2 buffers */
 +	*size = PAGE_ALIGN(vout->pix.width * vout->pix.height * vout->bpp);
 +	startindex = (vout->vid == OMAP_VIDEO1) ?
 +		video1_numbuffers : video2_numbuffers;
 +
 +	/* Check the size of the buffer */
 +	if (*size > vid_max_buf_size) {
 +		v4l2_err(&vout->vid_dev->v4l2_dev,
 +				"buffer allocation mismatch [%u] [%u]\n",
 +				*size, vout->buffer_size);
 +		return -ENOMEM;
 +	}
 +
 +	for (i = startindex; i < *count; i++) {
 +		vout->buffer_size = *size;
 +
 +		virt_addr = omap_vout_alloc_buffer(vout->buffer_size,
 +				&phy_addr);
 +		if (!virt_addr) {
 +			if (ovid->rotation_type == VOUT_ROT_NONE) {
 +				break;
 +			} else {
 +				if (!is_rotation_enabled(vout))
 +					break;
 +			/* Free the VRFB buffers if no space for V4L2 buffers */
 +			for (j = i; j < *count; j++) {
 +				omap_vout_free_buffer(
 +						vout->smsshado_virt_addr[j],
 +						vout->smsshado_size);
 +				vout->smsshado_virt_addr[j] = 0;
 +				vout->smsshado_phy_addr[j] = 0;
 +				}
 +			}
 +		}
 +		vout->buf_virt_addr[i] = virt_addr;
 +		vout->buf_phy_addr[i] = phy_addr;
 +	}
 +	*count = vout->buffer_allocated = i;
 +
 +	return 0;
 +}
 +
 +/*
 + * Free the V4L2 buffers additionally allocated than default
 + * number of buffers
 + */
 +static void omap_vout_free_extra_buffers(struct omap_vout_device *vout)
 +{
 +	int num_buffers = 0, i;
 +
 +	num_buffers = (vout->vid == OMAP_VIDEO1) ?
 +		video1_numbuffers : video2_numbuffers;
 +
 +	for (i = num_buffers; i < vout->buffer_allocated; i++) {
 +		if (vout->buf_virt_addr[i])
 +			omap_vout_free_buffer(vout->buf_virt_addr[i],
 +					vout->buffer_size);
 +
 +		vout->buf_virt_addr[i] = 0;
 +		vout->buf_phy_addr[i] = 0;
 +	}
 +	vout->buffer_allocated = num_buffers;
 +}
 +
 +/*
 + * This function will be called when VIDIOC_QBUF ioctl is called.
 + * It prepare buffers before give out for the display. This function
 + * converts user space virtual address into physical address if userptr memory
 + * exchange mechanism is used. If rotation is enabled, it copies entire
 + * buffer into VRFB memory space before giving it to the DSS.
 + */
 +static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 +			struct videobuf_buffer *vb,
 +			enum v4l2_field field)
 +{
 +	struct omap_vout_device *vout = q->priv_data;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +
 +	if (VIDEOBUF_NEEDS_INIT == vb->state) {
 +		vb->width = vout->pix.width;
 +		vb->height = vout->pix.height;
 +		vb->size = vb->width * vb->height * vout->bpp;
 +		vb->field = field;
 +	}
 +	vb->state = VIDEOBUF_PREPARED;
 +	/* if user pointer memory mechanism is used, get the physical
 +	 * address of the buffer
 +	 */
 +	if (V4L2_MEMORY_USERPTR == vb->memory) {
 +		if (0 == vb->baddr)
 +			return -EINVAL;
 +		/* Physical address */
 +		vout->queued_buf_addr[vb->i] = (u8 *)
 +			omap_vout_uservirt_to_phys(vb->baddr);
 +	} else {
 +		u32 addr, dma_addr;
 +		unsigned long size;
 +
 +		addr = (unsigned long) vout->buf_virt_addr[vb->i];
 +		size = (unsigned long) vb->size;
 +
 +		dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr,
 +				size, DMA_TO_DEVICE);
 +		if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr))
 +			v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n");
 +
 +		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 +	}
 +
 +	if (ovid->rotation_type == VOUT_ROT_VRFB)
 +		return omap_vout_prepare_vrfb(vout, vb);
 +	else
 +		return 0;
 +}
 +
 +/*
 + * Buffer queue function will be called from the videobuf layer when _QBUF
 + * ioctl is called. It is used to enqueue buffer, which is ready to be
 + * displayed.
 + */
 +static void omap_vout_buffer_queue(struct videobuf_queue *q,
 +			  struct videobuf_buffer *vb)
 +{
 +	struct omap_vout_device *vout = q->priv_data;
 +
 +	/* Driver is also maintainig a queue. So enqueue buffer in the driver
 +	 * queue */
 +	list_add_tail(&vb->queue, &vout->dma_queue);
 +
 +	vb->state = VIDEOBUF_QUEUED;
 +}
 +
 +/*
 + * Buffer release function is called from videobuf layer to release buffer
 + * which are already allocated
 + */
 +static void omap_vout_buffer_release(struct videobuf_queue *q,
 +			    struct videobuf_buffer *vb)
 +{
 +	struct omap_vout_device *vout = q->priv_data;
 +
 +	vb->state = VIDEOBUF_NEEDS_INIT;
 +
 +	if (V4L2_MEMORY_MMAP != vout->memory)
 +		return;
 +}
 +
 +/*
 + *  File operations
 + */
 +static unsigned int omap_vout_poll(struct file *file,
 +				   struct poll_table_struct *wait)
 +{
 +	struct omap_vout_device *vout = file->private_data;
 +	struct videobuf_queue *q = &vout->vbq;
 +
 +	return videobuf_poll_stream(file, q, wait);
 +}
 +
 +static void omap_vout_vm_open(struct vm_area_struct *vma)
 +{
 +	struct omap_vout_device *vout = vma->vm_private_data;
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 +		"vm_open [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end);
 +	vout->mmap_count++;
 +}
 +
 +static void omap_vout_vm_close(struct vm_area_struct *vma)
 +{
 +	struct omap_vout_device *vout = vma->vm_private_data;
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 +		"vm_close [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end);
 +	vout->mmap_count--;
 +}
 +
 +static struct vm_operations_struct omap_vout_vm_ops = {
 +	.open	= omap_vout_vm_open,
 +	.close	= omap_vout_vm_close,
 +};
 +
 +static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 +{
 +	int i;
 +	void *pos;
 +	unsigned long start = vma->vm_start;
 +	unsigned long size = (vma->vm_end - vma->vm_start);
 +	struct omap_vout_device *vout = file->private_data;
 +	struct videobuf_queue *q = &vout->vbq;
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 +			" %s pgoff=0x%lx, start=0x%lx, end=0x%lx\n", __func__,
 +			vma->vm_pgoff, vma->vm_start, vma->vm_end);
 +
 +	/* look for the buffer to map */
 +	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
 +		if (NULL == q->bufs[i])
 +			continue;
 +		if (V4L2_MEMORY_MMAP != q->bufs[i]->memory)
 +			continue;
 +		if (q->bufs[i]->boff == (vma->vm_pgoff << PAGE_SHIFT))
 +			break;
 +	}
 +
 +	if (VIDEO_MAX_FRAME == i) {
 +		v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 +				"offset invalid [offset=0x%lx]\n",
 +				(vma->vm_pgoff << PAGE_SHIFT));
 +		return -EINVAL;
 +	}
 +	/* Check the size of the buffer */
 +	if (size > vout->buffer_size) {
 +		v4l2_err(&vout->vid_dev->v4l2_dev,
 +				"insufficient memory [%lu] [%u]\n",
 +				size, vout->buffer_size);
 +		return -ENOMEM;
 +	}
 +
 +	q->bufs[i]->baddr = vma->vm_start;
 +
 +	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
 +	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 +	vma->vm_ops = &omap_vout_vm_ops;
 +	vma->vm_private_data = (void *) vout;
 +	pos = (void *)vout->buf_virt_addr[i];
 +	vma->vm_pgoff = virt_to_phys((void *)pos) >> PAGE_SHIFT;
 +	while (size > 0) {
 +		unsigned long pfn;
 +		pfn = virt_to_phys((void *) pos) >> PAGE_SHIFT;
 +		if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
 +			return -EAGAIN;
 +		start += PAGE_SIZE;
 +		pos += PAGE_SIZE;
 +		size -= PAGE_SIZE;
 +	}
 +	vout->mmap_count++;
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
 +
 +	return 0;
 +}
 +
 +static int omap_vout_release(struct file *file)
 +{
 +	unsigned int ret, i;
 +	struct videobuf_queue *q;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout = file->private_data;
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Entering %s\n", __func__);
 +	ovid = &vout->vid_info;
 +
 +	if (!vout)
 +		return 0;
 +
 +	q = &vout->vbq;
 +	/* Disable all the overlay managers connected with this interface */
 +	for (i = 0; i < ovid->num_overlays; i++) {
 +		struct omap_overlay *ovl = ovid->overlays[i];
- 		if (ovl->manager && ovl->manager->device)
++		struct omap_dss_device *dssdev = ovl->get_device(ovl);
++
++		if (dssdev)
 +			ovl->disable(ovl);
 +	}
 +	/* Turn off the pipeline */
 +	ret = omapvid_apply_changes(vout);
 +	if (ret)
 +		v4l2_warn(&vout->vid_dev->v4l2_dev,
 +				"Unable to apply changes\n");
 +
 +	/* Free all buffers */
 +	omap_vout_free_extra_buffers(vout);
 +
 +	/* Free the VRFB buffers only if they are allocated
 +	 * during reqbufs.  Don't free if init time allocated
 +	 */
 +	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 +		if (!vout->vrfb_static_allocation)
 +			omap_vout_free_vrfb_buffers(vout);
 +	}
 +	videobuf_mmap_free(q);
 +
 +	/* Even if apply changes fails we should continue
 +	   freeing allocated memory */
 +	if (vout->streaming) {
 +		u32 mask = 0;
 +
 +		mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN |
 +			DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_VSYNC2;
 +		omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 +		vout->streaming = 0;
 +
 +		videobuf_streamoff(q);
 +		videobuf_queue_cancel(q);
 +	}
 +
 +	if (vout->mmap_count != 0)
 +		vout->mmap_count = 0;
 +
 +	vout->opened -= 1;
 +	file->private_data = NULL;
 +
 +	if (vout->buffer_allocated)
 +		videobuf_mmap_free(q);
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
 +	return ret;
 +}
 +
 +static int omap_vout_open(struct file *file)
 +{
 +	struct videobuf_queue *q;
 +	struct omap_vout_device *vout = NULL;
 +
 +	vout = video_drvdata(file);
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Entering %s\n", __func__);
 +
 +	if (vout == NULL)
 +		return -ENODEV;
 +
 +	/* for now, we only support single open */
 +	if (vout->opened)
 +		return -EBUSY;
 +
 +	vout->opened += 1;
 +
 +	file->private_data = vout;
 +	vout->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
 +
 +	q = &vout->vbq;
 +	video_vbq_ops.buf_setup = omap_vout_buffer_setup;
 +	video_vbq_ops.buf_prepare = omap_vout_buffer_prepare;
 +	video_vbq_ops.buf_release = omap_vout_buffer_release;
 +	video_vbq_ops.buf_queue = omap_vout_buffer_queue;
 +	spin_lock_init(&vout->vbq_lock);
 +
 +	videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev,
 +			&vout->vbq_lock, vout->type, V4L2_FIELD_NONE,
 +			sizeof(struct videobuf_buffer), vout, NULL);
 +
 +	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
 +	return 0;
 +}
 +
 +/*
 + * V4L2 ioctls
 + */
 +static int vidioc_querycap(struct file *file, void *fh,
 +		struct v4l2_capability *cap)
 +{
 +	struct omap_vout_device *vout = fh;
 +
 +	strlcpy(cap->driver, VOUT_NAME, sizeof(cap->driver));
 +	strlcpy(cap->card, vout->vfd->name, sizeof(cap->card));
 +	cap->bus_info[0] = '\0';
 +	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_OUTPUT |
 +		V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
 +
 +	return 0;
 +}
 +
 +static int vidioc_enum_fmt_vid_out(struct file *file, void *fh,
 +			struct v4l2_fmtdesc *fmt)
 +{
 +	int index = fmt->index;
 +
 +	if (index >= NUM_OUTPUT_FORMATS)
 +		return -EINVAL;
 +
 +	fmt->flags = omap_formats[index].flags;
 +	strlcpy(fmt->description, omap_formats[index].description,
 +			sizeof(fmt->description));
 +	fmt->pixelformat = omap_formats[index].pixelformat;
 +
 +	return 0;
 +}
 +
 +static int vidioc_g_fmt_vid_out(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	struct omap_vout_device *vout = fh;
 +
 +	f->fmt.pix = vout->pix;
 +	return 0;
 +
 +}
 +
 +static int vidioc_try_fmt_vid_out(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_video_timings *timing;
 +	struct omap_vout_device *vout = fh;
++	struct omap_dss_device *dssdev;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
++	/* get the display device attached to the overlay */
++	dssdev = ovl->get_device(ovl);
 +
- 	if (!ovl->manager || !ovl->manager->device)
++	if (!dssdev)
 +		return -EINVAL;
- 	/* get the display device attached to the overlay */
- 	timing = &ovl->manager->device->panel.timings;
++
++	timing = &dssdev->panel.timings;
 +
 +	vout->fbuf.fmt.height = timing->y_res;
 +	vout->fbuf.fmt.width = timing->x_res;
 +
 +	omap_vout_try_format(&f->fmt.pix);
 +	return 0;
 +}
 +
 +static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	int ret, bpp;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_video_timings *timing;
 +	struct omap_vout_device *vout = fh;
++	struct omap_dss_device *dssdev;
 +
 +	if (vout->streaming)
 +		return -EBUSY;
 +
 +	mutex_lock(&vout->lock);
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
++	dssdev = ovl->get_device(ovl);
 +
 +	/* get the display device attached to the overlay */
- 	if (!ovl->manager || !ovl->manager->device) {
++	if (!dssdev) {
 +		ret = -EINVAL;
 +		goto s_fmt_vid_out_exit;
 +	}
- 	timing = &ovl->manager->device->panel.timings;
++	timing = &dssdev->panel.timings;
 +
 +	/* We dont support RGB24-packed mode if vrfb rotation
 +	 * is enabled*/
 +	if ((is_rotation_enabled(vout)) &&
 +			f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 +		ret = -EINVAL;
 +		goto s_fmt_vid_out_exit;
 +	}
 +
 +	/* get the framebuffer parameters */
 +
 +	if (is_rotation_90_or_270(vout)) {
 +		vout->fbuf.fmt.height = timing->x_res;
 +		vout->fbuf.fmt.width = timing->y_res;
 +	} else {
 +		vout->fbuf.fmt.height = timing->y_res;
 +		vout->fbuf.fmt.width = timing->x_res;
 +	}
 +
 +	/* change to samller size is OK */
 +
 +	bpp = omap_vout_try_format(&f->fmt.pix);
 +	f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
 +
 +	/* try & set the new output format */
 +	vout->bpp = bpp;
 +	vout->pix = f->fmt.pix;
 +	vout->vrfb_bpp = 1;
 +
 +	/* If YUYV then vrfb bpp is 2, for  others its 1 */
 +	if (V4L2_PIX_FMT_YUYV == vout->pix.pixelformat ||
 +			V4L2_PIX_FMT_UYVY == vout->pix.pixelformat)
 +		vout->vrfb_bpp = 2;
 +
 +	/* set default crop and win */
 +	omap_vout_new_format(&vout->pix, &vout->fbuf, &vout->crop, &vout->win);
 +
 +	/* Save the changes in the overlay strcuture */
 +	ret = omapvid_init(vout, 0);
 +	if (ret) {
 +		v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode\n");
 +		goto s_fmt_vid_out_exit;
 +	}
 +
 +	ret = 0;
 +
 +s_fmt_vid_out_exit:
 +	mutex_unlock(&vout->lock);
 +	return ret;
 +}
 +
 +static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	int ret = 0;
 +	struct omap_vout_device *vout = fh;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct v4l2_window *win = &f->fmt.win;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	ret = omap_vout_try_window(&vout->fbuf, win);
 +
 +	if (!ret) {
 +		if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
 +			win->global_alpha = 255;
 +		else
 +			win->global_alpha = f->fmt.win.global_alpha;
 +	}
 +
 +	return ret;
 +}
 +
 +static int vidioc_s_fmt_vid_overlay(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	int ret = 0;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout = fh;
 +	struct v4l2_window *win = &f->fmt.win;
 +
 +	mutex_lock(&vout->lock);
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	ret = omap_vout_new_window(&vout->crop, &vout->win, &vout->fbuf, win);
 +	if (!ret) {
 +		/* Video1 plane does not support global alpha on OMAP3 */
 +		if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
 +			vout->win.global_alpha = 255;
 +		else
 +			vout->win.global_alpha = f->fmt.win.global_alpha;
 +
 +		vout->win.chromakey = f->fmt.win.chromakey;
 +	}
 +	mutex_unlock(&vout->lock);
 +	return ret;
 +}
 +
 +static int vidioc_enum_fmt_vid_overlay(struct file *file, void *fh,
 +			struct v4l2_fmtdesc *fmt)
 +{
 +	int index = fmt->index;
 +
 +	if (index >= NUM_OUTPUT_FORMATS)
 +		return -EINVAL;
 +
 +	fmt->flags = omap_formats[index].flags;
 +	strlcpy(fmt->description, omap_formats[index].description,
 +			sizeof(fmt->description));
 +	fmt->pixelformat = omap_formats[index].pixelformat;
 +	return 0;
 +}
 +
 +static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh,
 +			struct v4l2_format *f)
 +{
 +	u32 key_value =  0;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout = fh;
 +	struct omap_overlay_manager_info info;
 +	struct v4l2_window *win = &f->fmt.win;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	win->w = vout->win.w;
 +	win->field = vout->win.field;
 +	win->global_alpha = vout->win.global_alpha;
 +
 +	if (ovl->manager && ovl->manager->get_manager_info) {
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		key_value = info.trans_key;
 +	}
 +	win->chromakey = key_value;
 +	return 0;
 +}
 +
 +static int vidioc_cropcap(struct file *file, void *fh,
 +		struct v4l2_cropcap *cropcap)
 +{
 +	struct omap_vout_device *vout = fh;
 +	struct v4l2_pix_format *pix = &vout->pix;
 +
 +	if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
 +		return -EINVAL;
 +
 +	/* Width and height are always even */
 +	cropcap->bounds.width = pix->width & ~1;
 +	cropcap->bounds.height = pix->height & ~1;
 +
 +	omap_vout_default_crop(&vout->pix, &vout->fbuf, &cropcap->defrect);
 +	cropcap->pixelaspect.numerator = 1;
 +	cropcap->pixelaspect.denominator = 1;
 +	return 0;
 +}
 +
 +static int vidioc_g_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 +{
 +	struct omap_vout_device *vout = fh;
 +
 +	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
 +		return -EINVAL;
 +	crop->c = vout->crop;
 +	return 0;
 +}
 +
 +static int vidioc_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop)
 +{
 +	int ret = -EINVAL;
 +	struct omap_vout_device *vout = fh;
 +	struct omapvideo_info *ovid;
 +	struct omap_overlay *ovl;
 +	struct omap_video_timings *timing;
++	struct omap_dss_device *dssdev;
 +
 +	if (vout->streaming)
 +		return -EBUSY;
 +
 +	mutex_lock(&vout->lock);
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
++	/* get the display device attached to the overlay */
++	dssdev = ovl->get_device(ovl);
 +
- 	if (!ovl->manager || !ovl->manager->device) {
++	if (!dssdev) {
 +		ret = -EINVAL;
 +		goto s_crop_err;
 +	}
- 	/* get the display device attached to the overlay */
- 	timing = &ovl->manager->device->panel.timings;
++
++	timing = &dssdev->panel.timings;
 +
 +	if (is_rotation_90_or_270(vout)) {
 +		vout->fbuf.fmt.height = timing->x_res;
 +		vout->fbuf.fmt.width = timing->y_res;
 +	} else {
 +		vout->fbuf.fmt.height = timing->y_res;
 +		vout->fbuf.fmt.width = timing->x_res;
 +	}
 +
 +	if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
 +		ret = omap_vout_new_crop(&vout->pix, &vout->crop, &vout->win,
 +				&vout->fbuf, &crop->c);
 +
 +s_crop_err:
 +	mutex_unlock(&vout->lock);
 +	return ret;
 +}
 +
 +static int vidioc_queryctrl(struct file *file, void *fh,
 +		struct v4l2_queryctrl *ctrl)
 +{
 +	int ret = 0;
 +
 +	switch (ctrl->id) {
 +	case V4L2_CID_ROTATE:
 +		ret = v4l2_ctrl_query_fill(ctrl, 0, 270, 90, 0);
 +		break;
 +	case V4L2_CID_BG_COLOR:
 +		ret = v4l2_ctrl_query_fill(ctrl, 0, 0xFFFFFF, 1, 0);
 +		break;
 +	case V4L2_CID_VFLIP:
 +		ret = v4l2_ctrl_query_fill(ctrl, 0, 1, 1, 0);
 +		break;
 +	default:
 +		ctrl->name[0] = '\0';
 +		ret = -EINVAL;
 +	}
 +	return ret;
 +}
 +
 +static int vidioc_g_ctrl(struct file *file, void *fh, struct v4l2_control *ctrl)
 +{
 +	int ret = 0;
 +	struct omap_vout_device *vout = fh;
 +
 +	switch (ctrl->id) {
 +	case V4L2_CID_ROTATE:
 +		ctrl->value = vout->control[0].value;
 +		break;
 +	case V4L2_CID_BG_COLOR:
 +	{
 +		struct omap_overlay_manager_info info;
 +		struct omap_overlay *ovl;
 +
 +		ovl = vout->vid_info.overlays[0];
 +		if (!ovl->manager || !ovl->manager->get_manager_info) {
 +			ret = -EINVAL;
 +			break;
 +		}
 +
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		ctrl->value = info.default_color;
 +		break;
 +	}
 +	case V4L2_CID_VFLIP:
 +		ctrl->value = vout->control[2].value;
 +		break;
 +	default:
 +		ret = -EINVAL;
 +	}
 +	return ret;
 +}
 +
 +static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
 +{
 +	int ret = 0;
 +	struct omap_vout_device *vout = fh;
 +
 +	switch (a->id) {
 +	case V4L2_CID_ROTATE:
 +	{
 +		struct omapvideo_info *ovid;
 +		int rotation = a->value;
 +
 +		ovid = &vout->vid_info;
 +
 +		mutex_lock(&vout->lock);
 +		if (rotation && ovid->rotation_type == VOUT_ROT_NONE) {
 +			mutex_unlock(&vout->lock);
 +			ret = -ERANGE;
 +			break;
 +		}
 +
 +		if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 +			mutex_unlock(&vout->lock);
 +			ret = -EINVAL;
 +			break;
 +		}
 +
 +		if (v4l2_rot_to_dss_rot(rotation, &vout->rotation,
 +							vout->mirror)) {
 +			mutex_unlock(&vout->lock);
 +			ret = -EINVAL;
 +			break;
 +		}
 +
 +		vout->control[0].value = rotation;
 +		mutex_unlock(&vout->lock);
 +		break;
 +	}
 +	case V4L2_CID_BG_COLOR:
 +	{
 +		struct omap_overlay *ovl;
 +		unsigned int  color = a->value;
 +		struct omap_overlay_manager_info info;
 +
 +		ovl = vout->vid_info.overlays[0];
 +
 +		mutex_lock(&vout->lock);
 +		if (!ovl->manager || !ovl->manager->get_manager_info) {
 +			mutex_unlock(&vout->lock);
 +			ret = -EINVAL;
 +			break;
 +		}
 +
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		info.default_color = color;
 +		if (ovl->manager->set_manager_info(ovl->manager, &info)) {
 +			mutex_unlock(&vout->lock);
 +			ret = -EINVAL;
 +			break;
 +		}
 +
 +		vout->control[1].value = color;
 +		mutex_unlock(&vout->lock);
 +		break;
 +	}
 +	case V4L2_CID_VFLIP:
 +	{
 +		struct omap_overlay *ovl;
 +		struct omapvideo_info *ovid;
 +		unsigned int  mirror = a->value;
 +
 +		ovid = &vout->vid_info;
 +		ovl = ovid->overlays[0];
 +
 +		mutex_lock(&vout->lock);
 +		if (mirror && ovid->rotation_type == VOUT_ROT_NONE) {
 +			mutex_unlock(&vout->lock);
 +			ret = -ERANGE;
 +			break;
 +		}
 +
 +		if (mirror  && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 +			mutex_unlock(&vout->lock);
 +			ret = -EINVAL;
 +			break;
 +		}
 +		vout->mirror = mirror;
 +		vout->control[2].value = mirror;
 +		mutex_unlock(&vout->lock);
 +		break;
 +	}
 +	default:
 +		ret = -EINVAL;
 +	}
 +	return ret;
 +}
 +
 +static int vidioc_reqbufs(struct file *file, void *fh,
 +			struct v4l2_requestbuffers *req)
 +{
 +	int ret = 0;
 +	unsigned int i, num_buffers = 0;
 +	struct omap_vout_device *vout = fh;
 +	struct videobuf_queue *q = &vout->vbq;
 +
 +	if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
 +		return -EINVAL;
 +	/* if memory is not mmp or userptr
 +	   return error */
 +	if ((V4L2_MEMORY_MMAP != req->memory) &&
 +			(V4L2_MEMORY_USERPTR != req->memory))
 +		return -EINVAL;
 +
 +	mutex_lock(&vout->lock);
 +	/* Cannot be requested when streaming is on */
 +	if (vout->streaming) {
 +		ret = -EBUSY;
 +		goto reqbuf_err;
 +	}
 +
 +	/* If buffers are already allocated free them */
 +	if (q->bufs[0] && (V4L2_MEMORY_MMAP == q->bufs[0]->memory)) {
 +		if (vout->mmap_count) {
 +			ret = -EBUSY;
 +			goto reqbuf_err;
 +		}
 +		num_buffers = (vout->vid == OMAP_VIDEO1) ?
 +			video1_numbuffers : video2_numbuffers;
 +		for (i = num_buffers; i < vout->buffer_allocated; i++) {
 +			omap_vout_free_buffer(vout->buf_virt_addr[i],
 +					vout->buffer_size);
 +			vout->buf_virt_addr[i] = 0;
 +			vout->buf_phy_addr[i] = 0;
 +		}
 +		vout->buffer_allocated = num_buffers;
 +		videobuf_mmap_free(q);
 +	} else if (q->bufs[0] && (V4L2_MEMORY_USERPTR == q->bufs[0]->memory)) {
 +		if (vout->buffer_allocated) {
 +			videobuf_mmap_free(q);
 +			for (i = 0; i < vout->buffer_allocated; i++) {
 +				kfree(q->bufs[i]);
 +				q->bufs[i] = NULL;
 +			}
 +			vout->buffer_allocated = 0;
 +		}
 +	}
 +
 +	/*store the memory type in data structure */
 +	vout->memory = req->memory;
 +
 +	INIT_LIST_HEAD(&vout->dma_queue);
 +
 +	/* call videobuf_reqbufs api */
 +	ret = videobuf_reqbufs(q, req);
 +	if (ret < 0)
 +		goto reqbuf_err;
 +
 +	vout->buffer_allocated = req->count;
 +
 +reqbuf_err:
 +	mutex_unlock(&vout->lock);
 +	return ret;
 +}
 +
 +static int vidioc_querybuf(struct file *file, void *fh,
 +			struct v4l2_buffer *b)
 +{
 +	struct omap_vout_device *vout = fh;
 +
 +	return videobuf_querybuf(&vout->vbq, b);
 +}
 +
 +static int vidioc_qbuf(struct file *file, void *fh,
 +			struct v4l2_buffer *buffer)
 +{
 +	struct omap_vout_device *vout = fh;
 +	struct videobuf_queue *q = &vout->vbq;
 +
 +	if ((V4L2_BUF_TYPE_VIDEO_OUTPUT != buffer->type) ||
 +			(buffer->index >= vout->buffer_allocated) ||
 +			(q->bufs[buffer->index]->memory != buffer->memory)) {
 +		return -EINVAL;
 +	}
 +	if (V4L2_MEMORY_USERPTR == buffer->memory) {
 +		if ((buffer->length < vout->pix.sizeimage) ||
 +				(0 == buffer->m.userptr)) {
 +			return -EINVAL;
 +		}
 +	}
 +
 +	if ((is_rotation_enabled(vout)) &&
 +			vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) {
 +		v4l2_warn(&vout->vid_dev->v4l2_dev,
 +				"DMA Channel not allocated for Rotation\n");
 +		return -EINVAL;
 +	}
 +
 +	return videobuf_qbuf(q, buffer);
 +}
 +
 +static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 +{
 +	struct omap_vout_device *vout = fh;
 +	struct videobuf_queue *q = &vout->vbq;
 +
 +	int ret;
 +	u32 addr;
 +	unsigned long size;
 +	struct videobuf_buffer *vb;
 +
 +	vb = q->bufs[b->index];
 +
 +	if (!vout->streaming)
 +		return -EINVAL;
 +
 +	if (file->f_flags & O_NONBLOCK)
 +		/* Call videobuf_dqbuf for non blocking mode */
 +		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
 +	else
 +		/* Call videobuf_dqbuf for  blocking mode */
 +		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
 +
 +	addr = (unsigned long) vout->buf_phy_addr[vb->i];
 +	size = (unsigned long) vb->size;
 +	dma_unmap_single(vout->vid_dev->v4l2_dev.dev,  addr,
 +				size, DMA_TO_DEVICE);
 +	return ret;
 +}
 +
 +static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
 +{
 +	int ret = 0, j;
 +	u32 addr = 0, mask = 0;
 +	struct omap_vout_device *vout = fh;
 +	struct videobuf_queue *q = &vout->vbq;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +
 +	mutex_lock(&vout->lock);
 +
 +	if (vout->streaming) {
 +		ret = -EBUSY;
 +		goto streamon_err;
 +	}
 +
 +	ret = videobuf_streamon(q);
 +	if (ret)
 +		goto streamon_err;
 +
 +	if (list_empty(&vout->dma_queue)) {
 +		ret = -EIO;
 +		goto streamon_err1;
 +	}
 +
 +	/* Get the next frame from the buffer queue */
 +	vout->next_frm = vout->cur_frm = list_entry(vout->dma_queue.next,
 +			struct videobuf_buffer, queue);
 +	/* Remove buffer from the buffer queue */
 +	list_del(&vout->cur_frm->queue);
 +	/* Mark state of the current frame to active */
 +	vout->cur_frm->state = VIDEOBUF_ACTIVE;
 +	/* Initialize field_id and started member */
 +	vout->field_id = 0;
 +
 +	/* set flag here. Next QBUF will start DMA */
 +	vout->streaming = 1;
 +
 +	vout->first_int = 1;
 +
 +	if (omap_vout_calculate_offset(vout)) {
 +		ret = -EINVAL;
 +		goto streamon_err1;
 +	}
 +	addr = (unsigned long) vout->queued_buf_addr[vout->cur_frm->i]
 +		+ vout->cropped_offset;
 +
 +	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
 +		| DISPC_IRQ_VSYNC2;
 +
 +	omap_dispc_register_isr(omap_vout_isr, vout, mask);
 +
 +	for (j = 0; j < ovid->num_overlays; j++) {
 +		struct omap_overlay *ovl = ovid->overlays[j];
 +
- 		if (ovl->manager && ovl->manager->device) {
++		if (ovl->get_device(ovl)) {
 +			struct omap_overlay_info info;
 +			ovl->get_overlay_info(ovl, &info);
 +			info.paddr = addr;
 +			if (ovl->set_overlay_info(ovl, &info)) {
 +				ret = -EINVAL;
 +				goto streamon_err1;
 +			}
 +		}
 +	}
 +
 +	/* First save the configuration in ovelray structure */
 +	ret = omapvid_init(vout, addr);
 +	if (ret)
 +		v4l2_err(&vout->vid_dev->v4l2_dev,
 +				"failed to set overlay info\n");
 +	/* Enable the pipeline and set the Go bit */
 +	ret = omapvid_apply_changes(vout);
 +	if (ret)
 +		v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode\n");
 +
 +	for (j = 0; j < ovid->num_overlays; j++) {
 +		struct omap_overlay *ovl = ovid->overlays[j];
++		struct omap_dss_device *dssdev = ovl->get_device(ovl);
 +
- 		if (ovl->manager && ovl->manager->device) {
++		if (dssdev) {
 +			ret = ovl->enable(ovl);
 +			if (ret)
 +				goto streamon_err1;
 +		}
 +	}
 +
 +	ret = 0;
 +
 +streamon_err1:
 +	if (ret)
 +		ret = videobuf_streamoff(q);
 +streamon_err:
 +	mutex_unlock(&vout->lock);
 +	return ret;
 +}
 +
 +static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 +{
 +	u32 mask = 0;
 +	int ret = 0, j;
 +	struct omap_vout_device *vout = fh;
 +	struct omapvideo_info *ovid = &vout->vid_info;
 +
 +	if (!vout->streaming)
 +		return -EINVAL;
 +
 +	vout->streaming = 0;
 +	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
 +		| DISPC_IRQ_VSYNC2;
 +
 +	omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 +
 +	for (j = 0; j < ovid->num_overlays; j++) {
 +		struct omap_overlay *ovl = ovid->overlays[j];
++		struct omap_dss_device *dssdev = ovl->get_device(ovl);
 +
- 		if (ovl->manager && ovl->manager->device)
++		if (dssdev)
 +			ovl->disable(ovl);
 +	}
 +
 +	/* Turn of the pipeline */
 +	ret = omapvid_apply_changes(vout);
 +	if (ret)
 +		v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in"
 +				" streamoff\n");
 +
 +	INIT_LIST_HEAD(&vout->dma_queue);
 +	ret = videobuf_streamoff(&vout->vbq);
 +
 +	return ret;
 +}
 +
 +static int vidioc_s_fbuf(struct file *file, void *fh,
 +				const struct v4l2_framebuffer *a)
 +{
 +	int enable = 0;
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout = fh;
 +	struct omap_overlay_manager_info info;
 +	enum omap_dss_trans_key_type key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	/* OMAP DSS doesn't support Source and Destination color
 +	   key together */
 +	if ((a->flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY) &&
 +			(a->flags & V4L2_FBUF_FLAG_CHROMAKEY))
 +		return -EINVAL;
 +	/* OMAP DSS Doesn't support the Destination color key
 +	   and alpha blending together */
 +	if ((a->flags & V4L2_FBUF_FLAG_CHROMAKEY) &&
 +			(a->flags & V4L2_FBUF_FLAG_LOCAL_ALPHA))
 +		return -EINVAL;
 +
 +	if ((a->flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY)) {
 +		vout->fbuf.flags |= V4L2_FBUF_FLAG_SRC_CHROMAKEY;
 +		key_type =  OMAP_DSS_COLOR_KEY_VID_SRC;
 +	} else
 +		vout->fbuf.flags &= ~V4L2_FBUF_FLAG_SRC_CHROMAKEY;
 +
 +	if ((a->flags & V4L2_FBUF_FLAG_CHROMAKEY)) {
 +		vout->fbuf.flags |= V4L2_FBUF_FLAG_CHROMAKEY;
 +		key_type =  OMAP_DSS_COLOR_KEY_GFX_DST;
 +	} else
 +		vout->fbuf.flags &=  ~V4L2_FBUF_FLAG_CHROMAKEY;
 +
 +	if (a->flags & (V4L2_FBUF_FLAG_CHROMAKEY |
 +				V4L2_FBUF_FLAG_SRC_CHROMAKEY))
 +		enable = 1;
 +	else
 +		enable = 0;
 +	if (ovl->manager && ovl->manager->get_manager_info &&
 +			ovl->manager->set_manager_info) {
 +
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		info.trans_enabled = enable;
 +		info.trans_key_type = key_type;
 +		info.trans_key = vout->win.chromakey;
 +
 +		if (ovl->manager->set_manager_info(ovl->manager, &info))
 +			return -EINVAL;
 +	}
 +	if (a->flags & V4L2_FBUF_FLAG_LOCAL_ALPHA) {
 +		vout->fbuf.flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
 +		enable = 1;
 +	} else {
 +		vout->fbuf.flags &= ~V4L2_FBUF_FLAG_LOCAL_ALPHA;
 +		enable = 0;
 +	}
 +	if (ovl->manager && ovl->manager->get_manager_info &&
 +			ovl->manager->set_manager_info) {
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		/* enable this only if there is no zorder cap */
 +		if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
 +			info.partial_alpha_enabled = enable;
 +		if (ovl->manager->set_manager_info(ovl->manager, &info))
 +			return -EINVAL;
 +	}
 +
 +	return 0;
 +}
 +
 +static int vidioc_g_fbuf(struct file *file, void *fh,
 +		struct v4l2_framebuffer *a)
 +{
 +	struct omap_overlay *ovl;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout = fh;
 +	struct omap_overlay_manager_info info;
 +
 +	ovid = &vout->vid_info;
 +	ovl = ovid->overlays[0];
 +
 +	/* The video overlay must stay within the framebuffer and can't be
 +	   positioned independently. */
 +	a->flags = V4L2_FBUF_FLAG_OVERLAY;
 +	a->capability = V4L2_FBUF_CAP_LOCAL_ALPHA | V4L2_FBUF_CAP_CHROMAKEY
 +		| V4L2_FBUF_CAP_SRC_CHROMAKEY;
 +
 +	if (ovl->manager && ovl->manager->get_manager_info) {
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		if (info.trans_key_type == OMAP_DSS_COLOR_KEY_VID_SRC)
 +			a->flags |= V4L2_FBUF_FLAG_SRC_CHROMAKEY;
 +		if (info.trans_key_type == OMAP_DSS_COLOR_KEY_GFX_DST)
 +			a->flags |= V4L2_FBUF_FLAG_CHROMAKEY;
 +	}
 +	if (ovl->manager && ovl->manager->get_manager_info) {
 +		ovl->manager->get_manager_info(ovl->manager, &info);
 +		if (info.partial_alpha_enabled)
 +			a->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
 +	}
 +
 +	return 0;
 +}
 +
 +static const struct v4l2_ioctl_ops vout_ioctl_ops = {
 +	.vidioc_querycap      			= vidioc_querycap,
 +	.vidioc_enum_fmt_vid_out 		= vidioc_enum_fmt_vid_out,
 +	.vidioc_g_fmt_vid_out			= vidioc_g_fmt_vid_out,
 +	.vidioc_try_fmt_vid_out			= vidioc_try_fmt_vid_out,
 +	.vidioc_s_fmt_vid_out			= vidioc_s_fmt_vid_out,
 +	.vidioc_queryctrl    			= vidioc_queryctrl,
 +	.vidioc_g_ctrl       			= vidioc_g_ctrl,
 +	.vidioc_s_fbuf				= vidioc_s_fbuf,
 +	.vidioc_g_fbuf				= vidioc_g_fbuf,
 +	.vidioc_s_ctrl       			= vidioc_s_ctrl,
 +	.vidioc_try_fmt_vid_overlay 		= vidioc_try_fmt_vid_overlay,
 +	.vidioc_s_fmt_vid_overlay		= vidioc_s_fmt_vid_overlay,
 +	.vidioc_enum_fmt_vid_overlay		= vidioc_enum_fmt_vid_overlay,
 +	.vidioc_g_fmt_vid_overlay		= vidioc_g_fmt_vid_overlay,
 +	.vidioc_cropcap				= vidioc_cropcap,
 +	.vidioc_g_crop				= vidioc_g_crop,
 +	.vidioc_s_crop				= vidioc_s_crop,
 +	.vidioc_reqbufs				= vidioc_reqbufs,
 +	.vidioc_querybuf			= vidioc_querybuf,
 +	.vidioc_qbuf				= vidioc_qbuf,
 +	.vidioc_dqbuf				= vidioc_dqbuf,
 +	.vidioc_streamon			= vidioc_streamon,
 +	.vidioc_streamoff			= vidioc_streamoff,
 +};
 +
 +static const struct v4l2_file_operations omap_vout_fops = {
 +	.owner 		= THIS_MODULE,
 +	.poll		= omap_vout_poll,
 +	.unlocked_ioctl	= video_ioctl2,
 +	.mmap 		= omap_vout_mmap,
 +	.open 		= omap_vout_open,
 +	.release 	= omap_vout_release,
 +};
 +
 +/* Init functions used during driver initialization */
 +/* Initial setup of video_data */
 +static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 +{
 +	struct video_device *vfd;
 +	struct v4l2_pix_format *pix;
 +	struct v4l2_control *control;
- 	struct omap_dss_device *display =
- 		vout->vid_info.overlays[0]->manager->device;
++	struct omap_overlay *ovl = vout->vid_info.overlays[0];
++	struct omap_dss_device *display = ovl->get_device(ovl);
 +
 +	/* set the default pix */
 +	pix = &vout->pix;
 +
 +	/* Set the default picture of QVGA  */
 +	pix->width = QQVGA_WIDTH;
 +	pix->height = QQVGA_HEIGHT;
 +
 +	/* Default pixel format is RGB 5-6-5 */
 +	pix->pixelformat = V4L2_PIX_FMT_RGB565;
 +	pix->field = V4L2_FIELD_ANY;
 +	pix->bytesperline = pix->width * 2;
 +	pix->sizeimage = pix->bytesperline * pix->height;
 +	pix->priv = 0;
 +	pix->colorspace = V4L2_COLORSPACE_JPEG;
 +
 +	vout->bpp = RGB565_BPP;
 +	vout->fbuf.fmt.width  =  display->panel.timings.x_res;
 +	vout->fbuf.fmt.height =  display->panel.timings.y_res;
 +
 +	/* Set the data structures for the overlay parameters*/
 +	vout->win.global_alpha = 255;
 +	vout->fbuf.flags = 0;
 +	vout->fbuf.capability = V4L2_FBUF_CAP_LOCAL_ALPHA |
 +		V4L2_FBUF_CAP_SRC_CHROMAKEY | V4L2_FBUF_CAP_CHROMAKEY;
 +	vout->win.chromakey = 0;
 +
 +	omap_vout_new_format(pix, &vout->fbuf, &vout->crop, &vout->win);
 +
 +	/*Initialize the control variables for
 +	  rotation, flipping and background color. */
 +	control = vout->control;
 +	control[0].id = V4L2_CID_ROTATE;
 +	control[0].value = 0;
 +	vout->rotation = 0;
 +	vout->mirror = 0;
 +	vout->control[2].id = V4L2_CID_HFLIP;
 +	vout->control[2].value = 0;
 +	if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
 +		vout->vrfb_bpp = 2;
 +
 +	control[1].id = V4L2_CID_BG_COLOR;
 +	control[1].value = 0;
 +
 +	/* initialize the video_device struct */
 +	vfd = vout->vfd = video_device_alloc();
 +
 +	if (!vfd) {
 +		printk(KERN_ERR VOUT_NAME ": could not allocate"
 +				" video device struct\n");
 +		return -ENOMEM;
 +	}
 +	vfd->release = video_device_release;
 +	vfd->ioctl_ops = &vout_ioctl_ops;
 +
 +	strlcpy(vfd->name, VOUT_NAME, sizeof(vfd->name));
 +
 +	vfd->fops = &omap_vout_fops;
 +	vfd->v4l2_dev = &vout->vid_dev->v4l2_dev;
 +	vfd->vfl_dir = VFL_DIR_TX;
 +	mutex_init(&vout->lock);
 +
 +	vfd->minor = -1;
 +	return 0;
 +
 +}
 +
 +/* Setup video buffers */
 +static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
 +		int vid_num)
 +{
 +	u32 numbuffers;
 +	int ret = 0, i;
 +	struct omapvideo_info *ovid;
 +	struct omap_vout_device *vout;
 +	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 +	struct omap2video_device *vid_dev =
 +		container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
 +
 +	vout = vid_dev->vouts[vid_num];
 +	ovid = &vout->vid_info;
 +
 +	numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers;
 +	vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize;
 +	dev_info(&pdev->dev, "Buffer Size = %d\n", vout->buffer_size);
 +
 +	for (i = 0; i < numbuffers; i++) {
 +		vout->buf_virt_addr[i] =
 +			omap_vout_alloc_buffer(vout->buffer_size,
 +					(u32 *) &vout->buf_phy_addr[i]);
 +		if (!vout->buf_virt_addr[i]) {
 +			numbuffers = i;
 +			ret = -ENOMEM;
 +			goto free_buffers;
 +		}
 +	}
 +
 +	vout->cropped_offset = 0;
 +
 +	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 +		int static_vrfb_allocation = (vid_num == 0) ?
 +			vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
 +		ret = omap_vout_setup_vrfb_bufs(pdev, vid_num,
 +				static_vrfb_allocation);
 +	}
 +
 +	return ret;
 +
 +free_buffers:
 +	for (i = 0; i < numbuffers; i++) {
 +		omap_vout_free_buffer(vout->buf_virt_addr[i],
 +						vout->buffer_size);
 +		vout->buf_virt_addr[i] = 0;
 +		vout->buf_phy_addr[i] = 0;
 +	}
 +	return ret;
 +
 +}
 +
 +/* Create video out devices */
 +static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 +{
 +	int ret = 0, k;
 +	struct omap_vout_device *vout;
 +	struct video_device *vfd = NULL;
 +	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 +	struct omap2video_device *vid_dev = container_of(v4l2_dev,
 +			struct omap2video_device, v4l2_dev);
 +
 +	for (k = 0; k < pdev->num_resources; k++) {
 +
 +		vout = kzalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
 +		if (!vout) {
 +			dev_err(&pdev->dev, ": could not allocate memory\n");
 +			return -ENOMEM;
 +		}
 +
 +		vout->vid = k;
 +		vid_dev->vouts[k] = vout;
 +		vout->vid_dev = vid_dev;
 +		/* Select video2 if only 1 overlay is controlled by V4L2 */
 +		if (pdev->num_resources == 1)
 +			vout->vid_info.overlays[0] = vid_dev->overlays[k + 2];
 +		else
 +			/* Else select video1 and video2 one by one. */
 +			vout->vid_info.overlays[0] = vid_dev->overlays[k + 1];
 +		vout->vid_info.num_overlays = 1;
 +		vout->vid_info.id = k + 1;
 +
 +		/* Set VRFB as rotation_type for omap2 and omap3 */
 +		if (cpu_is_omap24xx() || cpu_is_omap34xx())
 +			vout->vid_info.rotation_type = VOUT_ROT_VRFB;
 +
 +		/* Setup the default configuration for the video devices
 +		 */
 +		if (omap_vout_setup_video_data(vout) != 0) {
 +			ret = -ENOMEM;
 +			goto error;
 +		}
 +
 +		/* Allocate default number of buffers for the video streaming
 +		 * and reserve the VRFB space for rotation
 +		 */
 +		if (omap_vout_setup_video_bufs(pdev, k) != 0) {
 +			ret = -ENOMEM;
 +			goto error1;
 +		}
 +
 +		/* Register the Video device with V4L2
 +		 */
 +		vfd = vout->vfd;
 +		if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
 +			dev_err(&pdev->dev, ": Could not register "
 +					"Video for Linux device\n");
 +			vfd->minor = -1;
 +			ret = -ENODEV;
 +			goto error2;
 +		}
 +		video_set_drvdata(vfd, vout);
 +
 +		/* Configure the overlay structure */
 +		ret = omapvid_init(vid_dev->vouts[k], 0);
 +		if (!ret)
 +			goto success;
 +
 +error2:
 +		if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
 +			omap_vout_release_vrfb(vout);
 +		omap_vout_free_buffers(vout);
 +error1:
 +		video_device_release(vfd);
 +error:
 +		kfree(vout);
 +		return ret;
 +
 +success:
 +		dev_info(&pdev->dev, ": registered and initialized"
 +				" video device %d\n", vfd->minor);
 +		if (k == (pdev->num_resources - 1))
 +			return 0;
 +	}
 +
 +	return -ENODEV;
 +}
 +/* Driver functions */
 +static void omap_vout_cleanup_device(struct omap_vout_device *vout)
 +{
 +	struct video_device *vfd;
 +	struct omapvideo_info *ovid;
 +
 +	if (!vout)
 +		return;
 +
 +	vfd = vout->vfd;
 +	ovid = &vout->vid_info;
 +	if (vfd) {
 +		if (!video_is_registered(vfd)) {
 +			/*
 +			 * The device was never registered, so release the
 +			 * video_device struct directly.
 +			 */
 +			video_device_release(vfd);
 +		} else {
 +			/*
 +			 * The unregister function will release the video_device
 +			 * struct as well as unregistering it.
 +			 */
 +			video_unregister_device(vfd);
 +		}
 +	}
 +	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 +		omap_vout_release_vrfb(vout);
 +		/* Free the VRFB buffer if allocated
 +		 * init time
 +		 */
 +		if (vout->vrfb_static_allocation)
 +			omap_vout_free_vrfb_buffers(vout);
 +	}
 +	omap_vout_free_buffers(vout);
 +
 +	kfree(vout);
 +}
 +
 +static int omap_vout_remove(struct platform_device *pdev)
 +{
 +	int k;
 +	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 +	struct omap2video_device *vid_dev = container_of(v4l2_dev, struct
 +			omap2video_device, v4l2_dev);
 +
 +	v4l2_device_unregister(v4l2_dev);
 +	for (k = 0; k < pdev->num_resources; k++)
 +		omap_vout_cleanup_device(vid_dev->vouts[k]);
 +
 +	for (k = 0; k < vid_dev->num_displays; k++) {
 +		if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED)
 +			vid_dev->displays[k]->driver->disable(vid_dev->displays[k]);
 +
 +		omap_dss_put_device(vid_dev->displays[k]);
 +	}
 +	kfree(vid_dev);
 +	return 0;
 +}
 +
 +static int __init omap_vout_probe(struct platform_device *pdev)
 +{
 +	int ret = 0, i;
 +	struct omap_overlay *ovl;
 +	struct omap_dss_device *dssdev = NULL;
 +	struct omap_dss_device *def_display;
 +	struct omap2video_device *vid_dev = NULL;
 +
 +	if (pdev->num_resources == 0) {
 +		dev_err(&pdev->dev, "probed for an unknown device\n");
 +		return -ENODEV;
 +	}
 +
 +	vid_dev = kzalloc(sizeof(struct omap2video_device), GFP_KERNEL);
 +	if (vid_dev == NULL)
 +		return -ENOMEM;
 +
 +	vid_dev->num_displays = 0;
 +	for_each_dss_dev(dssdev) {
 +		omap_dss_get_device(dssdev);
 +
 +		if (!dssdev->driver) {
 +			dev_warn(&pdev->dev, "no driver for display: %s\n",
 +					dssdev->name);
 +			omap_dss_put_device(dssdev);
 +			continue;
 +		}
 +
 +		vid_dev->displays[vid_dev->num_displays++] = dssdev;
 +	}
 +
 +	if (vid_dev->num_displays == 0) {
 +		dev_err(&pdev->dev, "no displays\n");
 +		ret = -EINVAL;
 +		goto probe_err0;
 +	}
 +
 +	vid_dev->num_overlays = omap_dss_get_num_overlays();
 +	for (i = 0; i < vid_dev->num_overlays; i++)
 +		vid_dev->overlays[i] = omap_dss_get_overlay(i);
 +
 +	vid_dev->num_managers = omap_dss_get_num_overlay_managers();
 +	for (i = 0; i < vid_dev->num_managers; i++)
 +		vid_dev->managers[i] = omap_dss_get_overlay_manager(i);
 +
 +	/* Get the Video1 overlay and video2 overlay.
 +	 * Setup the Display attached to that overlays
 +	 */
 +	for (i = 1; i < vid_dev->num_overlays; i++) {
 +		ovl = omap_dss_get_overlay(i);
- 		if (ovl->manager && ovl->manager->device) {
- 			def_display = ovl->manager->device;
++		dssdev = ovl->get_device(ovl);
++
++		if (dssdev) {
++			def_display = dssdev;
 +		} else {
 +			dev_warn(&pdev->dev, "cannot find display\n");
 +			def_display = NULL;
 +		}
 +		if (def_display) {
 +			struct omap_dss_driver *dssdrv = def_display->driver;
 +
 +			ret = dssdrv->enable(def_display);
 +			if (ret) {
 +				/* Here we are not considering a error
 +				 *  as display may be enabled by frame
 +				 *  buffer driver
 +				 */
 +				dev_warn(&pdev->dev,
 +					"'%s' Display already enabled\n",
 +					def_display->name);
 +			}
 +		}
 +	}
 +
 +	if (v4l2_device_register(&pdev->dev, &vid_dev->v4l2_dev) < 0) {
 +		dev_err(&pdev->dev, "v4l2_device_register failed\n");
 +		ret = -ENODEV;
 +		goto probe_err1;
 +	}
 +
 +	ret = omap_vout_create_video_devices(pdev);
 +	if (ret)
 +		goto probe_err2;
 +
 +	for (i = 0; i < vid_dev->num_displays; i++) {
 +		struct omap_dss_device *display = vid_dev->displays[i];
 +
 +		if (display->driver->update)
 +			display->driver->update(display, 0, 0,
 +					display->panel.timings.x_res,
 +					display->panel.timings.y_res);
 +	}
 +	return 0;
 +
 +probe_err2:
 +	v4l2_device_unregister(&vid_dev->v4l2_dev);
 +probe_err1:
 +	for (i = 1; i < vid_dev->num_overlays; i++) {
 +		def_display = NULL;
 +		ovl = omap_dss_get_overlay(i);
- 		if (ovl->manager && ovl->manager->device)
- 			def_display = ovl->manager->device;
++		dssdev = ovl->get_device(ovl);
++
++		if (dssdev)
++			def_display = dssdev;
 +
 +		if (def_display && def_display->driver)
 +			def_display->driver->disable(def_display);
 +	}
 +probe_err0:
 +	kfree(vid_dev);
 +	return ret;
 +}
 +
 +static struct platform_driver omap_vout_driver = {
 +	.driver = {
 +		.name = VOUT_NAME,
 +	},
 +	.remove = omap_vout_remove,
 +};
 +
 +static int __init omap_vout_init(void)
 +{
 +	if (platform_driver_probe(&omap_vout_driver, omap_vout_probe) != 0) {
 +		printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n");
 +		return -EINVAL;
 +	}
 +	return 0;
 +}
 +
 +static void omap_vout_cleanup(void)
 +{
 +	platform_driver_unregister(&omap_vout_driver);
 +}
 +
 +late_initcall(omap_vout_init);
 +module_exit(omap_vout_cleanup);
diff --cc drivers/video/da8xx-fb.c
index 113d43a16f54,65a11ef87e1c..80665f66ac1a
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@@ -948,10 -1038,10 +1038,10 @@@ static int __devexit fb_remove(struct p
  		dma_free_coherent(NULL, par->vram_size, par->vram_virt,
  				  par->vram_phys);
  		free_irq(par->irq, par);
- 		clk_disable(par->lcdc_clk);
- 		clk_put(par->lcdc_clk);
+ 		pm_runtime_put_sync(&dev->dev);
+ 		pm_runtime_disable(&dev->dev);
  		framebuffer_release(info);
 -		iounmap((void __iomem *)da8xx_fb_reg_base);
 +		iounmap(da8xx_fb_reg_base);
  		release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
  
  	}
@@@ -1385,14 -1477,12 +1477,12 @@@ err_release_fb_mem
  err_release_fb:
  	framebuffer_release(da8xx_fb_info);
  
- err_clk_disable:
- 	clk_disable(fb_clk);
- 
- err_clk_put:
- 	clk_put(fb_clk);
+ err_pm_runtime_disable:
+ 	pm_runtime_put_sync(&device->dev);
+ 	pm_runtime_disable(&device->dev);
  
  err_ioremap:
 -	iounmap((void __iomem *)da8xx_fb_reg_base);
 +	iounmap(da8xx_fb_reg_base);
  
  err_request_mem:
  	release_mem_region(lcdc_regs->start, len);
diff --cc drivers/video/msm/mddi.c
index bf73f0480061,d43e178fae27..35ac9e8bee63
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@@ -26,10 -26,7 +26,7 @@@
  #include <linux/clk.h>
  #include <linux/io.h>
  #include <linux/sched.h>
- #include <mach/msm_iomap.h>
- #include <mach/irqs.h>
- #include <mach/board.h>
 -#include <mach/msm_fb.h>
 +#include <linux/platform_data/video-msm_fb.h>
  #include "mddi_hw.h"
  
  #define FLAG_DISABLE_HIBERNATION 0x0001
diff --cc drivers/video/msm/mdp.c
index 2e0f3bab6114,752eff7de3ce..f2566c19e71c
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/msm/mdp.c
@@@ -25,8 -25,7 +25,7 @@@
  #include <linux/major.h>
  #include <linux/slab.h>
  
- #include <mach/msm_iomap.h>
 -#include <mach/msm_fb.h>
 +#include <linux/platform_data/video-msm_fb.h>
  #include <linux/platform_device.h>
  #include <linux/export.h>
  
diff --cc drivers/video/msm/mdp_hw.h
index a0bacf581b32,2a8413742630..35848d741001
--- a/drivers/video/msm/mdp_hw.h
+++ b/drivers/video/msm/mdp_hw.h
@@@ -15,8 -15,7 +15,7 @@@
  #ifndef _MDP_HW_H_
  #define _MDP_HW_H_
  
- #include <mach/msm_iomap.h>
 -#include <mach/msm_fb.h>
 +#include <linux/platform_data/video-msm_fb.h>
  
  struct mdp_info {
  	struct mdp_device mdp_dev;
diff --cc drivers/video/omap2/displays/panel-taal.c
index 6b5e6e0e202f,4cf94161ff51..f2f644680ca8
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@@ -900,29 -925,50 +925,50 @@@ static int taal_probe(struct omap_dss_d
  
  	atomic_set(&td->do_update, 0);
  
- 	td->workqueue = create_singlethread_workqueue("taal_esd");
- 	if (td->workqueue == NULL) {
- 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
- 		r = -ENOMEM;
- 		goto err_wq;
+ 	if (gpio_is_valid(td->reset_gpio)) {
+ 		r = devm_gpio_request_one(&dssdev->dev, td->reset_gpio,
+ 				GPIOF_OUT_INIT_LOW, "taal rst");
+ 		if (r) {
+ 			dev_err(&dssdev->dev, "failed to request reset gpio\n");
+ 			return r;
+ 		}
  	}
- 	INIT_DEFERRABLE_WORK(&td->esd_work, taal_esd_work);
- 	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
  
- 	dev_set_drvdata(&dssdev->dev, td);
+ 	if (gpio_is_valid(td->ext_te_gpio)) {
+ 		r = devm_gpio_request_one(&dssdev->dev, td->ext_te_gpio,
+ 				GPIOF_IN, "taal irq");
+ 		if (r) {
+ 			dev_err(&dssdev->dev, "GPIO request failed\n");
+ 			return r;
+ 		}
+ 
+ 		r = devm_request_irq(&dssdev->dev, gpio_to_irq(td->ext_te_gpio),
+ 				taal_te_isr,
+ 				IRQF_TRIGGER_RISING,
+ 				"taal vsync", dssdev);
  
- 	if (gpio_is_valid(panel_data->reset_gpio)) {
- 		r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
- 				"taal rst");
  		if (r) {
- 			dev_err(&dssdev->dev, "failed to request reset gpio\n");
- 			goto err_rst_gpio;
+ 			dev_err(&dssdev->dev, "IRQ request failed\n");
+ 			return r;
  		}
+ 
 -		INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
++		INIT_DEFERRABLE_WORK(&td->te_timeout_work,
+ 					taal_te_timeout_work_callback);
+ 
+ 		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
  	}
  
+ 	td->workqueue = create_singlethread_workqueue("taal_esd");
+ 	if (td->workqueue == NULL) {
+ 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+ 		return -ENOMEM;
+ 	}
 -	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
++	INIT_DEFERRABLE_WORK(&td->esd_work, taal_esd_work);
+ 	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+ 
  	taal_hw_reset(dssdev);
  
- 	if (panel_data->use_dsi_backlight) {
+ 	if (td->use_dsi_backlight) {
  		memset(&props, 0, sizeof(struct backlight_properties));
  		props.max_brightness = 255;
  
diff --cc drivers/video/omap2/dss/dispc.c
index ee9e29639dcc,a173a9481a23..b43477a5fae8
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@@ -37,9 -37,6 +37,8 @@@
  #include <linux/platform_device.h>
  #include <linux/pm_runtime.h>
  
 +#include <plat/cpu.h>
- #include <plat/clock.h>
 +
  #include <video/omapdss.h>
  
  #include "dss.h"