From: Paulo Zanoni Date: Fri, 3 Feb 2012 19:47:15 +0000 (-0200) Subject: drm/i915: set interlaced bits for TRANSCONF X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=5f7f726d2caf1e51a39872e5a30b6984235d388e;p=openwrt%2Fstaging%2Fblogic.git drm/i915: set interlaced bits for TRANSCONF I'm not sure why they are needed (I didn't notice any difference in my tests), but these bits are in our documentation and they are also set by the Windows driver. Signed-off-by: Paulo Zanoni Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 7eabdf056afb..7b4477cb1650 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3362,7 +3362,9 @@ #define TRANS_FSYNC_DELAY_HB4 (3<<27) #define TRANS_DP_AUDIO_ONLY (1<<26) #define TRANS_DP_VIDEO_AUDIO (0<<26) +#define TRANS_INTERLACE_MASK (7<<21) #define TRANS_PROGRESSIVE (0<<21) +#define TRANS_INTERLACED (3<<21) #define TRANS_8BPC (0<<5) #define TRANS_10BPC (1<<5) #define TRANS_6BPC (2<<5) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 34c63459c484..7fae6917beab 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1266,7 +1266,7 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; - u32 val; + u32 val, pipeconf_val; /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); @@ -1280,6 +1280,7 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv, reg = TRANSCONF(pipe); val = I915_READ(reg); + pipeconf_val = I915_READ(PIPECONF(pipe)); if (HAS_PCH_IBX(dev_priv->dev)) { /* @@ -1287,8 +1288,15 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv, * that in pipeconf reg. */ val &= ~PIPE_BPC_MASK; - val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + val |= pipeconf_val & PIPE_BPC_MASK; } + + val &= ~TRANS_INTERLACE_MASK; + if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) + val |= TRANS_INTERLACED; + else + val |= TRANS_PROGRESSIVE; + I915_WRITE(reg, val | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe);