From: David Bauer Date: Sat, 18 Jul 2020 20:12:19 +0000 (+0200) Subject: ramips: don't create switch config for VIXMINI X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=612d5282b5107635e015dbbc40924509bea209fc;p=openwrt%2Fstaging%2Fjow.git ramips: don't create switch config for VIXMINI Don't create UCI switch config for the GL.iNet microuter-N300 and VIXMINI. These devices only have a single LAN port. Creating the switch config makes usage of VLANs more complicated, as they would have to be configured on the MAC as well as the "switch". Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index e3d18b5fba..0809109c13 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -11,6 +11,8 @@ ramips_setup_interfaces() case $board in alfa-network,awusfree1|\ d-team,pbr-d1|\ + glinet,microuter-n300|\ + glinet,vixmini|\ mediatek,linkit-smart-7688|\ onion,omega2p|\ onion,omega2|\ @@ -57,11 +59,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" ;; - glinet,microuter-n300|\ - glinet,vixmini) - ucidef_add_switch "switch0" \ - "0:lan" "6@eth0" - ;; hilink,hlk-7628n|\ hiwifi,hc5861b|\ skylab,skw92a|\