From: DENG Qingfang Date: Tue, 10 Mar 2020 17:32:12 +0000 (+0800) Subject: kernel: backport support for clause 37 1000Base-X auto-negotiation X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=63696bd0fb9c97d6be6f91e360e46a9a9d0eab3c;p=openwrt%2Fstaging%2Fadrian.git kernel: backport support for clause 37 1000Base-X auto-negotiation This patch is needed for clause 37 1000Base-X encoding used in many SFP modules. Signed-off-by: DENG Qingfang Signed-off-by: René van Dorst --- diff --git a/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch b/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch new file mode 100644 index 0000000000..da76523730 --- /dev/null +++ b/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch @@ -0,0 +1,199 @@ +From fa6e98cee558622565c97924e922b97340aeabd8 Mon Sep 17 00:00:00 2001 +From: Heiner Kallweit +Date: Tue, 22 Oct 2019 11:31:07 -0700 +Subject: [PATCH] net: phy: add support for clause 37 auto-negotiation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds support for clause 37 1000Base-X auto-negotiation. + +Signed-off-by: Heiner Kallweit +Signed-off-by: Tao Ren +Tested-by: René van Dorst +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++ + include/linux/phy.h | 4 + + 2 files changed, 143 insertions(+) + +diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c +index f1f60bd4865a..fa71998fea51 100644 +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev) + return changed; + } + ++/** ++ * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters ++ * @phydev: target phy_device struct ++ * ++ * Description: Writes MII_ADVERTISE with the appropriate values, ++ * after sanitizing the values to make sure we only advertise ++ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement ++ * hasn't changed, and > 0 if it has changed. This function is intended ++ * for Clause 37 1000Base-X mode. ++ */ ++static int genphy_c37_config_advert(struct phy_device *phydev) ++{ ++ u16 adv = 0; ++ ++ /* Only allow advertising what this PHY supports */ ++ linkmode_and(phydev->advertising, phydev->advertising, ++ phydev->supported); ++ ++ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->advertising)) ++ adv |= ADVERTISE_1000XFULL; ++ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, ++ phydev->advertising)) ++ adv |= ADVERTISE_1000XPAUSE; ++ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, ++ phydev->advertising)) ++ adv |= ADVERTISE_1000XPSE_ASYM; ++ ++ return phy_modify_changed(phydev, MII_ADVERTISE, ++ ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | ++ ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, ++ adv); ++} ++ + /** + * genphy_config_eee_advert - disable unwanted eee mode advertisement + * @phydev: target phy_device struct +@@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) + } + EXPORT_SYMBOL(__genphy_config_aneg); + ++/** ++ * genphy_c37_config_aneg - restart auto-negotiation or write BMCR ++ * @phydev: target phy_device struct ++ * ++ * Description: If auto-negotiation is enabled, we configure the ++ * advertising, and then restart auto-negotiation. If it is not ++ * enabled, then we write the BMCR. This function is intended ++ * for use with Clause 37 1000Base-X mode. ++ */ ++int genphy_c37_config_aneg(struct phy_device *phydev) ++{ ++ int err, changed; ++ ++ if (phydev->autoneg != AUTONEG_ENABLE) ++ return genphy_setup_forced(phydev); ++ ++ err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, ++ BMCR_SPEED1000); ++ if (err) ++ return err; ++ ++ changed = genphy_c37_config_advert(phydev); ++ if (changed < 0) /* error */ ++ return changed; ++ ++ if (!changed) { ++ /* Advertisement hasn't changed, but maybe aneg was never on to ++ * begin with? Or maybe phy was isolated? ++ */ ++ int ctl = phy_read(phydev, MII_BMCR); ++ ++ if (ctl < 0) ++ return ctl; ++ ++ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) ++ changed = 1; /* do restart aneg */ ++ } ++ ++ /* Only restart aneg if we are advertising something different ++ * than we were before. ++ */ ++ if (changed > 0) ++ return genphy_restart_aneg(phydev); ++ ++ return 0; ++} ++EXPORT_SYMBOL(genphy_c37_config_aneg); ++ + /** + * genphy_aneg_done - return auto-negotiation status + * @phydev: target phy_device struct +@@ -1886,6 +1968,63 @@ int genphy_read_status(struct phy_device *phydev) + } + EXPORT_SYMBOL(genphy_read_status); + ++/** ++ * genphy_c37_read_status - check the link status and update current link state ++ * @phydev: target phy_device struct ++ * ++ * Description: Check the link, then figure out the current state ++ * by comparing what we advertise with what the link partner ++ * advertises. This function is for Clause 37 1000Base-X mode. ++ */ ++int genphy_c37_read_status(struct phy_device *phydev) ++{ ++ int lpa, err, old_link = phydev->link; ++ ++ /* Update the link, but return if there was an error */ ++ err = genphy_update_link(phydev); ++ if (err) ++ return err; ++ ++ /* why bother the PHY if nothing can have changed */ ++ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) ++ return 0; ++ ++ phydev->duplex = DUPLEX_UNKNOWN; ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ ++ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { ++ lpa = phy_read(phydev, MII_LPA); ++ if (lpa < 0) ++ return lpa; ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, ++ phydev->lp_advertising, lpa & LPA_LPACK); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->lp_advertising, lpa & LPA_1000XFULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, ++ phydev->lp_advertising, lpa & LPA_1000XPAUSE); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, ++ phydev->lp_advertising, ++ lpa & LPA_1000XPAUSE_ASYM); ++ ++ phy_resolve_aneg_linkmode(phydev); ++ } else if (phydev->autoneg == AUTONEG_DISABLE) { ++ int bmcr = phy_read(phydev, MII_BMCR); ++ ++ if (bmcr < 0) ++ return bmcr; ++ ++ if (bmcr & BMCR_FULLDPLX) ++ phydev->duplex = DUPLEX_FULL; ++ else ++ phydev->duplex = DUPLEX_HALF; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(genphy_c37_read_status); ++ + /** + * genphy_soft_reset - software reset the PHY via BMCR_RESET bit + * @phydev: target phy_device struct +diff --git a/include/linux/phy.h b/include/linux/phy.h +index 9a0e981df502..78436d58ce7c 100644 +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -1106,6 +1106,10 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, + int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, + u16 regnum, u16 val); + ++/* Clause 37 */ ++int genphy_c37_config_aneg(struct phy_device *phydev); ++int genphy_c37_read_status(struct phy_device *phydev); ++ + /* Clause 45 PHY */ + int genphy_c45_restart_aneg(struct phy_device *phydev); + int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);