From: Robert Marko Date: Tue, 7 May 2024 12:16:48 +0000 (+0200) Subject: ipq40xx: use existing labels for MDIO node X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=63c5d8bd726a7864673891ad0cff5520e6567acb;p=openwrt%2Fstaging%2Fjow.git ipq40xx: use existing labels for MDIO node Some boards are still defining MDIO nodes under soc instead of using the existing upstream labels to reference them so convert them. Link: https://github.com/openwrt/openwrt/pull/15415 Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts index f87fef32f3..f2e2ed3f7f 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts @@ -58,13 +58,6 @@ }; soc { - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -327,6 +320,13 @@ phy-names = "usb2-phy"; }; +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts index 121d3430ea..8d09bfd0b7 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -18,14 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -245,6 +237,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + reset-delay-us = <5000>; +}; + &gmac { status = "okay"; nvmem-cells = <&macaddr_art_0>; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts index 52ed1a07b2..e80a540244 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts @@ -18,10 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -96,6 +92,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts index 528f54cee4..52a96eae98 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts @@ -11,10 +11,6 @@ compatible = "engenius,eap1300"; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -230,6 +226,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &swport5 { status = "okay"; label = "lan"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts index 7aa439912a..1ef63bdc98 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts @@ -18,10 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -201,6 +197,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "EnGenius-EMD1"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts index 5c5a9f733d..9d70501cb7 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts @@ -11,10 +11,6 @@ compatible = "engenius,emr3500"; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -202,6 +198,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi index 0ea20530da..ca064837c8 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi @@ -26,10 +26,6 @@ compatible = "netgear,ex61x0v2"; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -334,6 +330,10 @@ nvmem-cells = <&precal_art_5000>, <&macaddr_dnidata_c>; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts index 1f953ee16b..b3617eb45e 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts @@ -19,10 +19,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -244,6 +240,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + ðphy0 { gpio-controller; #gpio-cells = <2>; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts index ff111d575f..bb197c2742 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts @@ -27,10 +27,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -269,6 +265,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi index c52af9b1df..9828b4b34e 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi @@ -12,13 +12,6 @@ }; soc { - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -226,6 +219,12 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts index ddbb5a7986..293bf3d20a 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts @@ -15,14 +15,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - gpio_export { compatible = "gpio-export"; #size-cells = <0>; @@ -234,6 +226,14 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts index 8575b504c8..f8e24ca53d 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts @@ -28,10 +28,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -273,6 +269,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts index 882d565bd1..4f31c8f283 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts @@ -23,10 +23,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -291,6 +287,10 @@ }; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts index fd797bd548..23e9457f02 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts @@ -28,10 +28,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts index 211a45bde0..d59c41fab1 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts @@ -37,10 +37,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -244,6 +240,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-cm520-79f.dts index 64752805a0..3569d6e53a 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-cm520-79f.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-cm520-79f.dts @@ -18,14 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -348,6 +340,14 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; +}; + &gmac { status = "okay"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi index e67d1ba7a8..119ba4b7fe 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi @@ -21,12 +21,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -243,3 +237,9 @@ &usb2_hs_phy { status = "okay"; }; + +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts index 7ff350a22c..8bf86d40cd 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts @@ -68,12 +68,6 @@ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; }; - - soc { - mdio@90000 { - status = "okay"; - }; - }; }; &watchdog { @@ -275,6 +269,10 @@ }; }; +&mdio { + status = "okay"; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzbox-7530.dts index 6fd8b48874..2344ae7bf8 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzbox-7530.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzbox-7530.dts @@ -22,10 +22,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -270,6 +266,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzrepeater-3000.dts index 6a81d96284..e8daef63f1 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzrepeater-3000.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzrepeater-3000.dts @@ -18,10 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -253,6 +249,10 @@ }; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts index bc0b5c47a3..89ba523e57 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts @@ -24,10 +24,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -356,6 +352,10 @@ }; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts index 59dbf7f1b0..c25b9ecf5b 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts @@ -20,13 +20,6 @@ }; soc { - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -329,6 +322,12 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts index f0d1402c35..b3eb610b32 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts @@ -42,10 +42,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -245,6 +241,10 @@ }; }; +&mdio { + status = "okay"; +}; + ðphy1 { status = "disabled"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-map-ac2200.dts index fd7cd014d6..7ec3c6a9ae 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-map-ac2200.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-map-ac2200.dts @@ -19,10 +19,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -342,6 +338,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts index e00385dbd7..7c0260ec3c 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts @@ -97,14 +97,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -229,6 +221,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; nvmem-cell-names = "mac-address"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts index 523c484e91..a4606dd21c 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts @@ -80,14 +80,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -212,6 +204,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; nvmem-cell-names = "mac-address"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts index 8f1a7f6551..06d65b8944 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts @@ -73,14 +73,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -205,6 +197,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; nvmem-cell-names = "mac-address"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts index 03b2f95965..752d714393 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts @@ -21,12 +21,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -278,6 +272,12 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-orbi.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-orbi.dtsi index 5cfed9faa0..bd7565ac02 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-orbi.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-orbi.dtsi @@ -16,13 +16,6 @@ }; soc { - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -274,6 +267,12 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-r619ac.dtsi index 11046db9bb..0463c61236 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-r619ac.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-r619ac.dtsi @@ -19,12 +19,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -282,6 +276,12 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + ðphy0 { qcom,single-led-1000; qcom,single-led-100; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rt-ac42u.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rt-ac42u.dts index 5feebce485..3cd8997a92 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rt-ac42u.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rt-ac42u.dts @@ -23,10 +23,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -269,6 +265,10 @@ }; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts index da8b8a1feb..7a13241b66 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts @@ -138,10 +138,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -376,6 +372,10 @@ qcom,ath10k-calibration-variant = "cellc,rtl30vw"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-u4019.dtsi index 23030b5e58..67d9f21f71 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-u4019.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-u4019.dtsi @@ -9,14 +9,6 @@ compatible = "unielec,u4019","qcom,ipq4019"; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -204,6 +196,14 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts index 74985b4b43..92b3fb399b 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts @@ -244,14 +244,6 @@ }; }; - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -360,6 +352,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <5000>; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-x1pro.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-x1pro.dtsi index fd435dce8e..b494d0ab1c 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-x1pro.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-x1pro.dtsi @@ -18,14 +18,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -204,6 +196,14 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi index 74d525afff..ae2d88da93 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi @@ -27,10 +27,6 @@ soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -296,6 +292,10 @@ }; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts index df562aa064..517d691d10 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts @@ -35,14 +35,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -259,6 +251,14 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts index fbc1616d7c..823431dcf1 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts @@ -22,15 +22,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -442,6 +433,15 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + &gmac { status = "okay"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi index a9fe56f537..8c56c7d2f1 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi @@ -12,16 +12,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy: ethernet-phy@5 { - reg = <0x5>; - }; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -214,6 +204,16 @@ }; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + ethphy: ethernet-phy@5 { + reg = <0x5>; + }; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts index d0f30eb86d..dfb639e2bb 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts @@ -38,10 +38,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -283,6 +279,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &gmac { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts index 857a2a551f..e6d74da864 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts @@ -23,10 +23,6 @@ }; soc { - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -348,6 +344,10 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi index bebad6f1e6..da22d4a671 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi @@ -33,12 +33,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - /* It is a 56-bit counter that supplies the count to the ARM arch timers and without upstream driver */ counter@4a1000 { @@ -403,6 +397,12 @@ nvmem-cell-names = "mac-address"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; nvmem-cells = <&mac_address 0>; diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts index 0d3bae2dfa..3bf9f8c42b 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts @@ -17,12 +17,6 @@ }; soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -124,6 +118,12 @@ status = "okay"; }; +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac { status = "okay"; };