From: Wolfram Sang Date: Tue, 19 Feb 2019 16:39:45 +0000 (+0100) Subject: i2c: gpio: fault-injector: add 'lose_arbitration' injector X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=63e57b6f191db99ffdd0dc6c7b9ee6b2cf7abb04;p=openwrt%2Fstaging%2Fblogic.git i2c: gpio: fault-injector: add 'lose_arbitration' injector Add a fault injector simulating 'arbitration lost' from multi-master setups. Read the docs for its usage. A helper function for future fault injectors using SCL interrupts is created to achieve this. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- diff --git a/Documentation/i2c/gpio-fault-injection b/Documentation/i2c/gpio-fault-injection index 1a44e3edc0c4..1f1bb96a64bd 100644 --- a/Documentation/i2c/gpio-fault-injection +++ b/Documentation/i2c/gpio-fault-injection @@ -83,3 +83,28 @@ This is why bus recovery (up to 9 clock pulses) must either check SDA or send additional STOP conditions to ensure the bus has been released. Otherwise random data will be written to a device! +Lost arbitration +================ + +Here, we want to simulate the condition where the master under test loses the +bus arbitration against another master in a multi-master setup. + +"lose_arbitration" +------------------ + +This file is write only and you need to write the duration of the arbitration +intereference (in µs, maximum is 100ms). The calling process will then sleep +and wait for the next bus clock. The process is interruptible, though. + +Arbitration lost is achieved by waiting for SCL going down by the master under +test and then pulling SDA low for some time. So, the I2C address sent out +should be corrupted and that should be detected properly. That means that the +address sent out should have a lot of '1' bits to be able to detect corruption. +There doesn't need to be a device at this address because arbitration lost +should be detected beforehand. Also note, that SCL going down is monitored +using interrupts, so the interrupt latency might cause the first bits to be not +corrupted. A good starting point for using this fault injector on an otherwise +idle bus is: + +# echo 200 > lose_arbitration & +# i2cget -y 0x3f diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 2d532cc042f5..76e43783f50f 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -7,12 +7,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include #include #include #include +#include #include #include #include @@ -27,6 +29,9 @@ struct i2c_gpio_private_data { struct i2c_gpio_platform_data pdata; #ifdef CONFIG_I2C_GPIO_FAULT_INJECTOR struct dentry *debug_dir; + /* these must be protected by bus lock */ + struct completion scl_irq_completion; + u64 scl_irq_data; #endif }; @@ -162,6 +167,70 @@ static int fops_incomplete_write_byte_set(void *data, u64 addr) } DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_write_byte, NULL, fops_incomplete_write_byte_set, "%llu\n"); +static int i2c_gpio_fi_act_on_scl_irq(struct i2c_gpio_private_data *priv, + irqreturn_t handler(int, void*)) +{ + int ret, irq = gpiod_to_irq(priv->scl); + + if (irq < 0) + return irq; + + i2c_lock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); + + ret = gpiod_direction_input(priv->scl); + if (ret) + goto unlock; + + reinit_completion(&priv->scl_irq_completion); + + ret = request_irq(irq, handler, IRQF_TRIGGER_FALLING, + "i2c_gpio_fault_injector_scl_irq", priv); + if (ret) + goto output; + + wait_for_completion_interruptible(&priv->scl_irq_completion); + + free_irq(irq, priv); + output: + ret = gpiod_direction_output(priv->scl, 1) ?: ret; + unlock: + i2c_unlock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); + + return ret; +} + +static irqreturn_t lose_arbitration_irq(int irq, void *dev_id) +{ + struct i2c_gpio_private_data *priv = dev_id; + + setsda(&priv->bit_data, 0); + udelay(priv->scl_irq_data); + setsda(&priv->bit_data, 1); + + complete(&priv->scl_irq_completion); + + return IRQ_HANDLED; +} + +static int fops_lose_arbitration_set(void *data, u64 duration) +{ + struct i2c_gpio_private_data *priv = data; + + if (duration > 100 * 1000) + return -EINVAL; + + priv->scl_irq_data = duration; + /* + * Interrupt on falling SCL. This ensures that the master under test has + * really started the transfer. Interrupt on falling SDA did only + * exercise 'bus busy' detection on some HW but not 'arbitration lost'. + * Note that the interrupt latency may cause the first bits to be + * transmitted correctly. + */ + return i2c_gpio_fi_act_on_scl_irq(priv, lose_arbitration_irq); +} +DEFINE_DEBUGFS_ATTRIBUTE(fops_lose_arbitration, NULL, fops_lose_arbitration_set, "%llu\n"); + static void i2c_gpio_fault_injector_init(struct platform_device *pdev) { struct i2c_gpio_private_data *priv = platform_get_drvdata(pdev); @@ -181,10 +250,15 @@ static void i2c_gpio_fault_injector_init(struct platform_device *pdev) if (!priv->debug_dir) return; + init_completion(&priv->scl_irq_completion); + debugfs_create_file_unsafe("incomplete_address_phase", 0200, priv->debug_dir, priv, &fops_incomplete_addr_phase); debugfs_create_file_unsafe("incomplete_write_byte", 0200, priv->debug_dir, priv, &fops_incomplete_write_byte); + if (priv->bit_data.getscl) + debugfs_create_file_unsafe("lose_arbitration", 0200, priv->debug_dir, + priv, &fops_lose_arbitration); debugfs_create_file_unsafe("scl", 0600, priv->debug_dir, priv, &fops_scl); debugfs_create_file_unsafe("sda", 0600, priv->debug_dir, priv, &fops_sda); }