From: Wim Van Sebroeck <wim@iguana.be>
Date: Sun, 29 Jul 2007 18:46:50 +0000 (+0000)
Subject: [WATCHDOG] Fix pcwd_init_module crash
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=647e50f38345525d8261c295a0d0629dcea23a9b;p=openwrt%2Fstaging%2Fblogic.git

[WATCHDOG] Fix pcwd_init_module crash

Fix for the problem detected by Ingo Molnar:
enabling CONFIG_PCWATCHDOG=y crashes bzImage bootup.

The reason for this can be found in drivers/makefile
We first do:
obj-y                           += char/
and later we do:
obj-y                           += base/ block/ misc/ mfd/ net/ media/

So if we put a platform or isa or usb bus driver in char/watchdog
(which is called from the Makefile in drivers/char/Makefile)
then we didn't have the different device drivers initialized yet
(they are in drivers/base and drivers/usb and ...)

This fix makes sure that we compile the watchdog drivers after
drivers/base, drivers/misc, drivers/pci and drivers/usb.
We also do the compile after hwmon because in the future the
watchdog temperature support will use the hwmon system.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---

diff --git a/drivers/Makefile b/drivers/Makefile
index a9e4c5f922a0..f0878b2ec55e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-y				+= i2c/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
+obj-$(CONFIG_WATCHDOG)		+= char/watchdog/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/
 obj-$(CONFIG_BT)		+= bluetooth/
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 8fecaf4010b1..2bc3a55ee407 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
 
-obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_MWAVE)		+= mwave/
 obj-$(CONFIG_AGP)		+= agp/
 obj-$(CONFIG_DRM)		+= drm/