From: John Crispin Date: Fri, 1 Jun 2018 09:41:11 +0000 (+0200) Subject: Revert "ramips: improve interrupt mapping" X-Git-Tag: state~2025 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=64878a561621e3af3708d3394c4f89473d7de1af;p=openwrt%2Fstaging%2Fchunkeey.git Revert "ramips: improve interrupt mapping" This reverts commit 5f7396ebef09b224edf08b0bda113613a42f0928. Signed-off-by: John Crispin --- diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 87399a113e..daca857f60 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -440,11 +440,10 @@ 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */ >; - #interrupt-cells = <1>; - interrupt-map-mask = <0xF0000 0 0 1>; - interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, - <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, - <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupts = ; status = "disabled"; diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c index 80f9cc2080..4209e2330f 100644 --- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c +++ b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c @@ -74,6 +74,9 @@ extern void chk_phy_pll(void); #define RALINK_PCI_CONFIG_ADDR 0x20 #define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 +#define RALINK_INT_PCIE0 pcie_irq[0] +#define RALINK_INT_PCIE1 pcie_irq[1] +#define RALINK_INT_PCIE2 pcie_irq[2] #define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) #define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) #define RALINK_PCIE0_RST (1<<24) @@ -364,12 +367,68 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u16 cmd; u32 val; - int irq; - - if (dev->bus->number == 0) { - write_config(0, slot, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); - read_config(0, slot, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); - printk("BAR0 at slot %d = %x\n", slot, val); + int irq = 0; + + if ((dev->bus->number == 0) && (slot == 0)) { + write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 0 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if((dev->bus->number == 0) && (slot == 0x1)) { + write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 1 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if((dev->bus->number == 0) && (slot == 0x2)) { + write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 2 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if ((dev->bus->number == 1) && (slot == 0x0)) { + switch (pcie_link_status) { + case 2: + case 6: + irq = RALINK_INT_PCIE1; + break; + case 4: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE0; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number == 2) && (slot == 0x0)) { + switch (pcie_link_status) { + case 5: + case 6: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE1; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number == 2) && (slot == 0x1)) { + switch (pcie_link_status) { + case 5: + case 6: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE1; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x0)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x1)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x2)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else { + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + return 0; } pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 @@ -377,9 +436,6 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; pci_write_config_word(dev, PCI_COMMAND, cmd); - - irq = of_irq_parse_and_map_pci(dev, slot, pin); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); return irq; }