From: Denis V. Lunev <den@openvz.org>
Date: Thu, 27 Mar 2008 11:39:17 +0000 (+0300)
Subject: Compilation fix for ixgbe_main.c.
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=652f093fdf14c7ca1e13c052da429ae385e4dc21;p=openwrt%2Fstaging%2Fblogic.git

Compilation fix for ixgbe_main.c.

Under CONFIG_DCA the compilation is broken since the commit
bd0362dde080cef377d99fa5beb5c25308c29c73 (ixgbe: Add optional
DCA infrastructure).

IXGBE_SUCCESS is not defined anywhere, replace it with 0.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7ad2993dc581..cb371a8c24a7 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -367,7 +367,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 		/* Always use CB2 mode, difference is masked
 		 * in the CB driver. */
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
-		if (dca_add_requester(dev) == IXGBE_SUCCESS) {
+		if (dca_add_requester(dev) == 0) {
 			ixgbe_setup_dca(adapter);
 			break;
 		}
@@ -381,7 +381,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 		break;
 	}
 
-	return IXGBE_SUCCESS;
+	return 0;
 }
 
 #endif /* CONFIG_DCA */
@@ -3605,7 +3605,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_register;
 
 #ifdef CONFIG_DCA
-	if (dca_add_requester(&pdev->dev) == IXGBE_SUCCESS) {
+	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
 		/* always use CB2 mode, difference is masked
 		 * in the CB driver */