From: Gavin Shan Date: Fri, 7 Sep 2012 22:44:13 +0000 (+0000) Subject: powerpc/eeh: Trace error based on PE from beginning X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=66523d9f2d799de901a5ae7bbed6c3f663fb0b00;p=openwrt%2Fstaging%2Fblogic.git powerpc/eeh: Trace error based on PE from beginning There're 2 conditions to trigger EEH error detection: invalid value returned from reading I/O or config space. On each case, the function eeh_dn_check_failure will be called to initialize EEH event and put it into the poll for further processing. The patch changes the function for a little bit so that the EEH error will be traced based on PE instead of EEH device any more. Also, the function eeh_find_device_pe() has been removed since the eeh device is tracing the PE by struct eeh_dev::pe. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index c7e5bd60bca1..3e301b14e09f 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -59,7 +59,6 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); void eeh_pe_state_mark(struct eeh_pe *pe, int state); void eeh_pe_state_clear(struct eeh_pe *pe, int state); -struct device_node *eeh_find_device_pe(struct device_node *dn); void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9c623c23057f..f210160c1fdb 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -263,21 +263,6 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) return pa | (token & (PAGE_SIZE-1)); } -/** - * eeh_find_device_pe - Retrieve the PE for the given device - * @dn: device node - * - * Return the PE under which this device lies - */ -struct device_node *eeh_find_device_pe(struct device_node *dn) -{ - while (dn->parent && of_node_to_eeh_dev(dn->parent) && - (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) { - dn = dn->parent; - } - return dn; -} - /** * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze * @dn: device node @@ -297,6 +282,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) { int ret; unsigned long flags; + struct eeh_pe *pe; struct eeh_dev *edev; int rc = 0; const char *location; @@ -306,23 +292,26 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (!eeh_subsystem_enabled) return 0; - if (!dn) { + if (dn) { + edev = of_node_to_eeh_dev(dn); + } else if (dev) { + edev = pci_dev_to_eeh_dev(dev); + dn = pci_device_to_OF_node(dev); + } else { eeh_stats.no_dn++; return 0; } - dn = eeh_find_device_pe(dn); - edev = of_node_to_eeh_dev(dn); + pe = edev->pe; /* Access to IO BARs might get this far and still not want checking. */ - if (!(edev->mode & EEH_MODE_SUPPORTED) || - edev->mode & EEH_MODE_NOCHECK) { + if (!pe) { eeh_stats.ignored_check++; - pr_debug("EEH: Ignored check (%x) for %s %s\n", - edev->mode, eeh_pci_name(dev), dn->full_name); + pr_debug("EEH: Ignored check for %s %s\n", + eeh_pci_name(dev), dn->full_name); return 0; } - if (!edev->config_addr && !edev->pe_config_addr) { + if (!pe->addr && !pe->config_addr) { eeh_stats.no_cfg_addr++; return 0; } @@ -335,13 +324,13 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) */ raw_spin_lock_irqsave(&confirm_error_lock, flags); rc = 1; - if (edev->mode & EEH_MODE_ISOLATED) { - edev->check_count++; - if (edev->check_count % EEH_MAX_FAILS == 0) { + if (pe->state & EEH_PE_ISOLATED) { + pe->check_count++; + if (pe->check_count % EEH_MAX_FAILS == 0) { location = of_get_property(dn, "ibm,loc-code", NULL); printk(KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", - edev->check_count, location, + pe->check_count, location, eeh_driver_name(dev), eeh_pci_name(dev)); printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", eeh_driver_name(dev)); @@ -357,7 +346,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = eeh_ops->get_state(dn, NULL); + ret = eeh_ops->get_state(pe, NULL); /* Note that config-io to empty slots may fail; * they are empty when they don't have children. @@ -370,7 +359,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) { eeh_stats.false_positives++; - edev->false_positives ++; + pe->false_positives++; rc = 0; goto dn_unlock; } @@ -381,10 +370,10 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * with other functions on this device, and functions under * bridges. */ - eeh_mark_slot(dn, EEH_MODE_ISOLATED); + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); raw_spin_unlock_irqrestore(&confirm_error_lock, flags); - eeh_send_failure_event(edev); + eeh_send_failure_event(pe); /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 8bc89e4ecb50..d19f4977c834 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -210,6 +210,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) { struct device_node *dn; + struct eeh_dev *edev; /* Found our PE and assume 8 at that point. */ @@ -217,7 +218,10 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) if (!dn) return NULL; - dn = eeh_find_device_pe(dn); + /* Get the top level device in the PE */ + edev = of_node_to_eeh_dev(dn); + edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list); + dn = eeh_dev_to_of_node(edev); if (!dn) return NULL;