From: Sundar Iyer Date: Fri, 24 Dec 2010 10:52:08 +0000 (+0100) Subject: mfd/ab8500: remove spi support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6680d940b80dbb0617226c5b76b071a3977feb1c;p=openwrt%2Fstaging%2Fblogic.git mfd/ab8500: remove spi support Since the Ab8500 v1.0, the SPI support is deprecated on the HW. Signed-off-by: Sundar Iyer Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c32b62a8a1f6..fd018366d670 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -496,13 +496,13 @@ config EZX_PCAP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER + depends on GENERIC_HARDIRQS && ABX500_CORE select MFD_CORE help Select this option to enable access to AB8500 power management - chip. This connects to U8500 either on the SSP/SPI bus - or the I2C bus via PRCMU. It also adds the irq_chip - parts for handling the Mixed Signal chip events. + chip. This connects to U8500 either on the SSP/SPI bus (deprecated + since hardware version v1.0) or the I2C bus via PRCMU. It also adds + the irq_chip parts for handling the Mixed Signal chip events. This chip embeds various other multimedia funtionalities as well. config AB8500_I2C_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5f35de9386e3..a54e2c7c6a1c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -70,7 +70,7 @@ obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB3550_CORE) += ab3550-core.o -obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o +obj-$(CONFIG_AB8500_CORE) += ab8500-core.o obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c deleted file mode 100644 index b1653421edb5..000000000000 --- a/drivers/mfd/ab8500-spi.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Srinidhi Kasagar - */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * This funtion writes to any AB8500 registers using - * SPI protocol & before it writes it packs the data - * in the below 24 bit frame format - * - * *|------------------------------------| - * *| 23|22...18|17.......10|9|8|7......0| - * *| r/w bank adr data | - * * ------------------------------------ - * - * This function shouldn't be called from interrupt - * context - */ -static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data) -{ - struct spi_device *spi = container_of(ab8500->dev, struct spi_device, - dev); - unsigned long spi_data = addr << 10 | data; - struct spi_transfer xfer; - struct spi_message msg; - - ab8500->tx_buf[0] = spi_data; - ab8500->rx_buf[0] = 0; - - xfer.tx_buf = ab8500->tx_buf; - xfer.rx_buf = NULL; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - return spi_sync(spi, &msg); -} - -static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr) -{ - struct spi_device *spi = container_of(ab8500->dev, struct spi_device, - dev); - unsigned long spi_data = 1 << 23 | addr << 10; - struct spi_transfer xfer; - struct spi_message msg; - int ret; - - ab8500->tx_buf[0] = spi_data; - ab8500->rx_buf[0] = 0; - - xfer.tx_buf = ab8500->tx_buf; - xfer.rx_buf = ab8500->rx_buf; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - ret = spi_sync(spi, &msg); - if (!ret) - /* - * Only the 8 lowermost bytes are - * defined with value, the rest may - * vary depending on chip/board noise. - */ - ret = ab8500->rx_buf[0] & 0xFFU; - - return ret; -} - -static int __devinit ab8500_spi_probe(struct spi_device *spi) -{ - struct ab8500 *ab8500; - int ret; - - spi->bits_per_word = 24; - ret = spi_setup(spi); - if (ret < 0) - return ret; - - ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); - if (!ab8500) - return -ENOMEM; - - ab8500->dev = &spi->dev; - ab8500->irq = spi->irq; - - ab8500->read = ab8500_spi_read; - ab8500->write = ab8500_spi_write; - - spi_set_drvdata(spi, ab8500); - - ret = ab8500_init(ab8500); - if (ret) - kfree(ab8500); - - return ret; -} - -static int __devexit ab8500_spi_remove(struct spi_device *spi) -{ - struct ab8500 *ab8500 = spi_get_drvdata(spi); - - ab8500_exit(ab8500); - kfree(ab8500); - - return 0; -} - -static struct spi_driver ab8500_spi_driver = { - .driver = { - .name = "ab8500-spi", - .owner = THIS_MODULE, - }, - .probe = ab8500_spi_probe, - .remove = __devexit_p(ab8500_spi_remove) -}; - -static int __init ab8500_spi_init(void) -{ - return spi_register_driver(&ab8500_spi_driver); -} -subsys_initcall(ab8500_spi_init); - -static void __exit ab8500_spi_exit(void) -{ - spi_unregister_driver(&ab8500_spi_driver); -} -module_exit(ab8500_spi_exit); - -MODULE_AUTHOR("Srinidhi KASAGAR