From: Sven Eckelmann <sven@narfation.org>
Date: Mon, 24 Oct 2022 16:55:44 +0000 (+0200)
Subject: ipq40xx: Convert openmesh,a42 to DSA
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=66a3c32b47a9c9da155fd04045d7262b005a1de3;p=openwrt%2Fstaging%2Fsvanheule.git

ipq40xx: Convert openmesh,a42 to DSA

* ethernet1:

  - physical port label "Ethernet 1"
  - can be used to power the device
  - its mac address is printed on the device label

* ethernet2:

  - physical port label "Ethernet 2"

Both ports are not marked by there role (because the vendor firmware
automatically detects roles) but the "Ethernet 1" port was used in the past
for "WAN" functionality in OpenWrt.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 80b7b02e8a..6c6d04a923 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -73,6 +73,9 @@ ipq40xx_setup_interfaces()
 	netgear,srs60)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
+	openmesh,a42)
+		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
+		;;
 	zte,mf286d)
 		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
 		;;
@@ -159,6 +162,9 @@ ipq40xx_setup_macs()
 	pakedge,wr-1)
 		wan_mac=$(macaddr_add $(get_mac_label) 1)
 		;;
+	openmesh,a42)
+		label_mac="$(mtd_get_mac_binary "0:ART" 0x0)"
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index ddfef1ab2d..4ae4103131 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -29,6 +29,10 @@ preinit_set_mac_address() {
 		ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
 		ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
 		;;
+	openmesh,a42)
+		ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0)
+		ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6)
+		;;
 	mikrotik,wap-ac)
 		base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
 		ip link set dev sw-eth1 address "$base_mac"
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
index 2236edf80b..89f5183045 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -17,10 +17,6 @@
 			status = "okay";
 		};
 
-		mdio@90000 {
-			status = "okay";
-		};
-
 		tcsr@194b000 {
 			/* select hostmode */
 			compatible = "qcom,tcsr";
@@ -166,6 +162,28 @@
 	status = "okay";
 };
 
+&mdio {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "ethernet2";
+};
+
+&swport5 {
+	status = "okay";
+	label = "ethernet1";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "OM-A42";
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 9fb34a7871..14a2745719 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -888,8 +888,7 @@ define Device/openmesh_a42
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += openmesh_a42
+TARGET_DEVICES += openmesh_a42
 
 define Device/openmesh_a62
 	$(call Device/FitImageLzma)