From: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Date: Wed, 27 Oct 2021 17:40:45 +0000 (+0200)
Subject: ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s)
X-Git-Tag: v22.03.0-rc1~1399
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6801b827e41dead8fe2e77654f4309ff7fcd47fa;p=openwrt%2Fstaging%2Fhauke.git

ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s)

This patch enables the SFP cage on the MikroTik RouterBOARD 921GS-5HPacD
(mANTBox 15s).

The RB922UAGS-5HPacD had it already working, so the support code is
moved to the common DTSI file both devices share.

Tested on a RouterBOARD 921GS-5HPacD with a MikroTik S-53LC20D module.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
---

diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
index 36979bbd33..8ad834fe61 100644
--- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
@@ -23,27 +23,6 @@
 			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	i2c: i2c {
-		compatible = "i2c-gpio";
-
-		sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-		i2c-gpio,timeout-ms = <1>;
-	};
-
-	sfp1: sfp {
-		compatible = "sff,sfp";
-
-		i2c-bus = <&i2c>;
-		maximum-power-milliwatt = <1000>;
-		los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-		tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-		// Toggling GPIO16 actually enables/disables the transmitter,
-		// but the SFP driver does not seem to be using it.
-		};
 };
 
 &pcie0 {
@@ -76,30 +55,3 @@
 &usb_phy1 {
 	status = "okay";
 };
-
-&mdio1 {
-	status = "okay";
-
-	phy_sfp: ethernet-phy@0 {
-		reg = <0>;
-		phy-mode = "sgmii";
-		sfp = <&sfp1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	phy-handle = <&phy_sfp>;
-	pll-data = <0x03000000 0x00000101 0x00001616>;
-	qca955x-sgmii-fixup;
-
-	gmac-config {
-		device = <&gmac>;
-	};
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
index 5e919856a5..d71c12c1fd 100644
--- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
@@ -42,6 +42,27 @@
 			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+		i2c-gpio,timeout-ms = <1>;
+	};
+
+	sfp1: sfp {
+		compatible = "sff,sfp";
+
+		i2c-bus = <&i2c>;
+		maximum-power-milliwatt = <1000>;
+		los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+		// Toggling GPIO16 actually enables/disables the transmitter,
+		// but the SFP driver does not seem to be using it.
+	};
 };
 
 &mdio0 {
@@ -64,6 +85,33 @@
 	};
 };
 
+&mdio1 {
+	status = "okay";
+
+	phy_sfp: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		sfp = <&sfp1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	phy-handle = <&phy_sfp>;
+	pll-data = <0x03000000 0x00000101 0x00001616>;
+	qca955x-sgmii-fixup;
+
+	gmac-config {
+		device = <&gmac>;
+	};
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
 &spi {
 	status = "okay";
 
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 4256f77379..2324ecc195 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -22,7 +22,8 @@ define Device/mikrotik_routerboard-921gs-5hpacd-15s
   $(Device/mikrotik_nand)
   SOC := qca9558
   DEVICE_MODEL := RouterBOARD 921GS-5HPacD-15s (mANTBox 15s)
-  DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+  DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-i2c-gpio \
+	kmod-sfp
   SUPPORTED_DEVICES += rb-921gs-5hpacd-r2
 endef
 TARGET_DEVICES += mikrotik_routerboard-921gs-5hpacd-15s
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index d4a32c1e1a..4058742133 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -15,7 +15,6 @@ ath79_setup_interfaces()
 			"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 		;;
 	mikrotik,routerboard-912uag-2hpnd|\
-	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
@@ -38,7 +37,6 @@ ath79_setup_macs()
 
 	case "$board" in
 	mikrotik,routerboard-912uag-2hpnd|\
-	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
@@ -46,6 +44,7 @@ ath79_setup_macs()
 		label_mac="$mac_base"
 		lan_mac="$mac_base"
 		;;
+	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-922uags-5hpacd)
 		label_mac="$mac_base"
 		lan_mac="$mac_base"