From: perillamint Date: Fri, 18 Nov 2016 11:46:27 +0000 (+0900) Subject: ramips: add support for WeVO W2914NS v2 X-Git-Tag: v17.01.0-rc1~778 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=68634426fee42803b4be956ef3ac262dee6f8384;p=openwrt%2Fstaging%2Fxback.git ramips: add support for WeVO W2914NS v2 Signed-off-by: Yong-hyu Ban --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index ed51555d38..f6dbf30a58 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -303,6 +303,9 @@ vocore) ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0" set_wifi_led "$board:green:status" ;; +w2914nsv2) + set_usb_led "$board:green:usb" + ;; w502u) set_usb_led "$board:blue:usb" set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 5ae6413fcf..e3e65506a9 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -87,6 +87,7 @@ ramips_setup_interfaces() sap-g3200u3|\ sk-wb8|\ vr500|\ + w2914nsv2|\ wf-2881|\ witi|\ wl-wn575a3|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4a4204bc24..5c82188406 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -13,6 +13,9 @@ ramips_board_detect() { machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) case "$machine" in + *"11AC NAS Router") + name="w2914nsv2" + ;; *"3G150B") name="3g150b" ;; @@ -454,6 +457,9 @@ ramips_board_detect() { *"W150M") name="w150m" ;; + *"W2914NS v2") + name="w2914nsv2" + ;; *"W306R V2.0") name="w306r-v20" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a7e9e19fa5..7c63c1cf3b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -133,6 +133,7 @@ platform_check_image() { vocore|\ vr500|\ w150m|\ + w2914nsv2|\ w306r-v20|\ w502u|\ wf-2881|\ diff --git a/target/linux/ramips/dts/11ACNAS.dts b/target/linux/ramips/dts/11ACNAS.dts new file mode 100644 index 0000000000..55678f532b --- /dev/null +++ b/target/linux/ramips/dts/11ACNAS.dts @@ -0,0 +1,12 @@ +/dts-v1/; + +#include "W2914NSV2.dtsi" + +/ { + model = "WeVO 11AC NAS Router"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; diff --git a/target/linux/ramips/dts/W2914NSV2.dts b/target/linux/ramips/dts/W2914NSV2.dts new file mode 100644 index 0000000000..37afffd475 --- /dev/null +++ b/target/linux/ramips/dts/W2914NSV2.dts @@ -0,0 +1,12 @@ +/dts-v1/; + +#include "W2914NSV2.dtsi" + +/ { + model = "WeVO W2914NS v2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; +}; diff --git a/target/linux/ramips/dts/W2914NSV2.dtsi b/target/linux/ramips/dts/W2914NSV2.dtsi new file mode 100644 index 0000000000..c842b0099b --- /dev/null +++ b/target/linux/ramips/dts/W2914NSV2.dtsi @@ -0,0 +1,117 @@ +#include "mt7621.dtsi" + +#include +#include + +/ { + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + // Only USB LED is connected to GPIO. + // All of other LEDs are connected directly to + // switch, WiFi chip, Vcc, so they are not controllable + // via GPIO + + usb { + label = "w2914nsv2:green:usb"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&xhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + wifi@14c3,7662 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + + pcie1 { + wifi@14c3,7603 { + compatible = "pci14c3,7603"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 647df7a12e..3518c8d944 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -207,6 +207,22 @@ define Device/rb750gr3 endef TARGET_DEVICES += rb750gr3 +define Device/w2914nsv2 + DTS := W2914NSV2 + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := WeVO W2914NS v2 + DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621 kmod-mt76 +endef +TARGET_DEVICES += w2914nsv2 + +define Device/11acnas + DTS := 11ACNAS + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := WeVO 11AC NAS Router + DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621 kmod-mt76 +endef +TARGET_DEVICES += 11acnas + # FIXME: is this still needed? define Image/Prepare #define Build/Compile