From: Mantas Pucka Date: Mon, 8 May 2017 10:28:38 +0000 (+0300) Subject: ar71xx: add support for 8devices Rambutan development board X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=68b5d34f69421264de6e5d77760fcc2bfe9ee687;p=openwrt%2Fstaging%2Fblocktrron.git ar71xx: add support for 8devices Rambutan development board Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 945167bee6..4db1b148a2 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -74,6 +74,9 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 4096 2048 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0) ;; + rambutan) + ath9k_eeprom_extract "art" 4096 2048 + ;; z1) . /lib/upgrade/nand.sh diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 92ee516235..5c3b1a7e1b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -811,6 +811,9 @@ ar71xx_board_detect() { *"R6100") name="r6100" ;; + *"Rambutan"*) + name="rambutan" + ;; *"RE450") name="re450" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx index 50f59defe1..277287d383 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx @@ -44,6 +44,12 @@ preinit_set_mac_address() { mac_wan=$(mtd_get_mac_binary caldata 6) [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan" ;; + rambutan) + mac_lan=$(mtd_get_mac_binary art 0) + [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" + mac_wan=$(mtd_get_mac_binary art 6) + [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan" + ;; tew-632brp) fetch_mac_from_mtd config lan_mac wan_mac ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 5be678ea36..8ebdea3018 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -521,6 +521,7 @@ platform_check_image() { c-60|\ nbg6716|\ r6100|\ + rambutan|\ wndr3700v4|\ wndr4300) nand_do_platform_check $board $1 @@ -663,6 +664,7 @@ platform_pre_upgrade() { c-60|\ nbg6716|\ r6100|\ + rambutan|\ rb-411|\ rb-411u|\ rb-433|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 6d0941be55..380254de41 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -146,6 +146,7 @@ CONFIG_ATH79_MACH_PQI_AIR_PEN=y CONFIG_ATH79_MACH_QIHOO_C301=y CONFIG_ATH79_MACH_R602N=y CONFIG_ATH79_MACH_R6100=y +# CONFIG_ATH79_MACH_RAMBUTAN is not set # CONFIG_ATH79_MACH_RB2011 is not set # CONFIG_ATH79_MACH_RB4XX is not set # CONFIG_ATH79_MACH_RB750 is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 7c3aa77a3e..eb8219e363 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1897,6 +1897,16 @@ config ATH79_MACH_LIMA select ATH79_DEV_WMAC select ATH79_DEV_ETH +config ATH79_MACH_RAMBUTAN + bool "8devices Rambutan board" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_CF_E316N_V2 bool "COMFAST CF-E316N v2 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 01ec1332b0..f503002288 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o +obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c new file mode 100644 index 0000000000..103aeb44b9 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c @@ -0,0 +1,90 @@ +/* + * 8devices Rambutan board support + * + * Copyright (C) 2017 Mantas Pucka + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +static struct at803x_platform_data rambutan_ar8032_data = { + .has_reset_gpio = 1, + .reset_gpio = 17, +}; + +static struct mdio_board_info rambutan_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &rambutan_ar8032_data, + }, +}; + +static struct at803x_platform_data rambutan_ar8033_data = { + .has_reset_gpio = 1, + .reset_gpio = 23, +}; + +static struct mdio_board_info rambutan_mdio1_info[] = { + { + .bus_id = "ag71xx-mdio.1", + .phy_addr = 0, + .platform_data = &rambutan_ar8033_data, + }, +}; + +static void __init rambutan_setup(void) +{ + ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); + ath79_register_nfc(); + ath79_register_usb(); + ath79_register_pci(); + ath79_register_wmac_simple(); + + mdiobus_register_board_info(rambutan_mdio0_info, + ARRAY_SIZE(rambutan_mdio0_info)); + mdiobus_register_board_info(rambutan_mdio1_info, + ARRAY_SIZE(rambutan_mdio1_info)); + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.phy_mask = BIT(0); + ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_eth1_pll_data.pll_1000 = 0x17000000; + ath79_eth1_pll_data.pll_10 = 0x1313; + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board", + rambutan_setup); + diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 694470d75b..4f0ae32d45 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -155,6 +155,7 @@ enum ath79_mach_type { ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ ATH79_MACH_R602N, /* P&W R602N */ ATH79_MACH_R6100, /* NETGEAR R6100 */ + ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk index 15e0809120..dfe78c2168 100644 --- a/target/linux/ar71xx/image/nand.mk +++ b/target/linux/ar71xx/image/nand.mk @@ -52,6 +52,20 @@ define Build/MerakiNAND-old @mv $@.new $@ endef +define Device/rambutan + DEVICE_TITLE := 8devices Rambutan + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + BOARDNAME = RAMBUTAN + BLOCKSIZE = 128KiB + MTDPARTS = ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi) + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + IMAGES := factory.ubi sysupgrade.tar + IMAGE/sysupgrade.tar := sysupgrade-tar + IMAGE/factory.ubi := append-ubi +endef +TARGET_DEVICES += rambutan + define Device/z1 DEVICE_TITLE := Meraki Z1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 1c5d0baa98..9b57f9047b 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -106,6 +106,7 @@ # CONFIG_ATH79_MACH_PQI_AIR_PEN is not set # CONFIG_ATH79_MACH_QIHOO_C301 is not set # CONFIG_ATH79_MACH_R602N is not set +CONFIG_ATH79_MACH_RAMBUTAN=y # CONFIG_ATH79_MACH_RE450 is not set # CONFIG_ATH79_MACH_RW2458N is not set # CONFIG_ATH79_MACH_SC1750 is not set