From: Alexander Duyck Date: Tue, 25 Sep 2012 00:31:27 +0000 (+0000) Subject: igb: Split igb_update_dca into separate Tx and Rx functions X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6a05004a8a65f187fa5493821d3115397209ae76;p=openwrt%2Fstaging%2Fblogic.git igb: Split igb_update_dca into separate Tx and Rx functions This change makes it so that igb_update_dca is broken into two halves, one for Rx and one for Tx. The advantage to this is primarily readability. In addition I am enabling relaxed ordering for reads from hardware since this is supported on all of the igb parts. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index e85c453f5428..44b76b3b6816 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -172,10 +172,13 @@ struct e1000_adv_tx_context_desc { #define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ #define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ #define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ #define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ /* Additional DCA related definitions, note change in position of CPUID */ #define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index e7b102723481..87abb5735852 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4851,45 +4851,63 @@ static irqreturn_t igb_msix_ring(int irq, void *data) } #ifdef CONFIG_IGB_DCA +static void igb_update_tx_dca(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); + + if (hw->mac.type != e1000_82575) + txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN | + E1000_DCA_TXCTRL_DATA_RRO_EN | + E1000_DCA_TXCTRL_DESC_DCA_EN; + + wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl); +} + +static void igb_update_rx_dca(struct igb_adapter *adapter, + struct igb_ring *rx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu); + + if (hw->mac.type != e1000_82575) + rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN | + E1000_DCA_RXCTRL_DESC_DCA_EN; + + wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl); +} + static void igb_update_dca(struct igb_q_vector *q_vector) { struct igb_adapter *adapter = q_vector->adapter; - struct e1000_hw *hw = &adapter->hw; int cpu = get_cpu(); if (q_vector->cpu == cpu) goto out_no_update; - if (q_vector->tx.ring) { - int q = q_vector->tx.ring->reg_idx; - u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q)); - if (hw->mac.type == e1000_82575) { - dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK; - dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); - } else { - dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576; - dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) << - E1000_DCA_TXCTRL_CPUID_SHIFT; - } - dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN; - wr32(E1000_DCA_TXCTRL(q), dca_txctrl); - } - if (q_vector->rx.ring) { - int q = q_vector->rx.ring->reg_idx; - u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q)); - if (hw->mac.type == e1000_82575) { - dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK; - dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); - } else { - dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576; - dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) << - E1000_DCA_RXCTRL_CPUID_SHIFT; - } - dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN; - dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN; - dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN; - wr32(E1000_DCA_RXCTRL(q), dca_rxctrl); - } + if (q_vector->tx.ring) + igb_update_tx_dca(adapter, q_vector->tx.ring, cpu); + + if (q_vector->rx.ring) + igb_update_rx_dca(adapter, q_vector->rx.ring, cpu); + q_vector->cpu = cpu; out_no_update: put_cpu();