From: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Date: Fri, 13 Jan 2017 15:37:36 +0000 (+0100)
Subject: ramips: simplify EX2700 network config
X-Git-Tag: v18.06.0-rc1~4074
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6b5dab9469291ac5d335766d9e55a9bf77808419;p=openwrt%2Fstaging%2Fchunkeey.git

ramips: simplify EX2700 network config

Don't create a vlan for the Netgear EX2700's only Ethernet port.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index baf619f7a1..2d8d8edc29 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -174,8 +174,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
-	cf-wr800n|\
-	ex2700)
+	cf-wr800n)
 		ucidef_add_switch "switch0" \
 			"4:lan" "6t@eth0"
 		;;
@@ -186,6 +185,7 @@ ramips_setup_interfaces()
 	cs-qr10|\
 	d105|\
 	dch-m225|\
+	ex2700|\
 	hpm|\
 	mzk-ex300np|\
 	mzk-ex750np|\