From: Ben Skeggs Date: Mon, 6 Feb 2012 01:34:20 +0000 (+1000) Subject: drm/nvc0/pm: enable mpll src pll, and calc mpll coefficients X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6b91d6b056ba39633cbdf24b9973df4ac99d7130;p=openwrt%2Fstaging%2Fblogic.git drm/nvc0/pm: enable mpll src pll, and calc mpll coefficients Signed-off-by: Ben Skeggs --- diff --git a/drivers/gpu/drm/nouveau/nvc0_pm.c b/drivers/gpu/drm/nouveau/nvc0_pm.c index 1348f29b544d..a2f6ae0fa4bd 100644 --- a/drivers/gpu/drm/nouveau/nvc0_pm.c +++ b/drivers/gpu/drm/nouveau/nvc0_pm.c @@ -166,6 +166,7 @@ struct nvc0_pm_clock { struct nvc0_pm_state { struct nouveau_pm_level *perflvl; struct nvc0_pm_clock eng[16]; + struct nvc0_pm_clock mem; }; static u32 @@ -304,6 +305,48 @@ calc_clk(struct drm_device *dev, int clk, struct nvc0_pm_clock *info, u32 freq) return 0; } +static int +calc_mem(struct drm_device *dev, struct nvc0_pm_clock *info, u32 freq) +{ + struct pll_lims pll; + int N, M, P, ret; + u32 ctrl; + + /* mclk pll input freq comes from another pll, make sure it's on */ + ctrl = nv_rd32(dev, 0x132020); + if (!(ctrl & 0x00000001)) { + /* if not, program it to 567MHz. nfi where this value comes + * from - it looks like it's in the pll limits table for + * 132000 but the binary driver ignores all my attempts to + * change this value. + */ + nv_wr32(dev, 0x137320, 0x00000103); + nv_wr32(dev, 0x137330, 0x81200606); + nv_wait(dev, 0x132020, 0x00010000, 0x00010000); + nv_wr32(dev, 0x132024, 0x0001150f); + nv_mask(dev, 0x132020, 0x00000001, 0x00000001); + nv_wait(dev, 0x137390, 0x00020000, 0x00020000); + nv_mask(dev, 0x132020, 0x00000004, 0x00000004); + } + + /* for the moment, until the clock tree is better understood, use + * pll mode for all clock frequencies + */ + ret = get_pll_limits(dev, 0x132000, &pll); + if (ret == 0) { + pll.refclk = read_pll(dev, 0x132020); + if (pll.refclk) { + ret = nva3_calc_pll(dev, &pll, freq, &N, NULL, &M, &P); + if (ret > 0) { + info->coef = (P << 16) | (N << 8) | M; + return 0; + } + } + } + + return -EINVAL; +} + void * nvc0_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) { @@ -336,6 +379,14 @@ nvc0_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) return ERR_PTR(ret); } + if (perflvl->memory) { + ret = calc_mem(dev, &info->mem, perflvl->memory); + if (ret) { + kfree(info); + return ERR_PTR(ret); + } + } + info->perflvl = perflvl; return info; }